i want to combine eeprom and spi together but did't found
i want to know, can 93LC76C ICs EEPROM work with spi?
i try to search about this topic at another forum but, this don't have this topic...
can i use microC Library in this topic??
here, is a shematic of this circuit..
Uploaded with ImageShack.us
thanks
need help..spi eeprom using 93LC76C
Re: need help..spi eeprom using 93LC76C
Hi
I took a quick look at the datasheet the chip is SPI compatible but it is not easy to use. I recomend you to use the EEPROM board of Mikroe which uses the PCF8583. This EEPROM is not SPI compatible it interface is I2C but there are a lot of example's for this chip.
If you really want an SPI EEPROM chip then you can like search on www.digikey.com. Here you can search for EEPROM based on connectivity.
I took a quick look at the datasheet the chip is SPI compatible but it is not easy to use. I recomend you to use the EEPROM board of Mikroe which uses the PCF8583. This EEPROM is not SPI compatible it interface is I2C but there are a lot of example's for this chip.
If you really want an SPI EEPROM chip then you can like search on www.digikey.com. Here you can search for EEPROM based on connectivity.
- tihomir.losic
- mikroElektronika team
- Posts: 2138
- Joined: 02 Dec 2009 14:16
- Location: Serbia
- Contact:
Re: need help..spi eeprom using 93LC76C
Hello,Bigote wrote:Hi
I took a quick look at the datasheet the chip is SPI compatible but it is not easy to use. I recomend you to use the EEPROM board of Mikroe which uses the PCF8583.
I need to make kind of a correction here. Accessory board which uses PCF8583 module is RTC board.
http://www.mikroe.com/eng/products/view/136/rtc-board/
RTC Board is a development tool for Real Time Clock PCF8583. It features a battery backup.
For using EEPROM, we have following board in offer:
EEPROM Board: http://www.mikroe.com/eng/products/view ... rom-board/
The EEPROM board features a high reliability, high performance CMOS technology serial 8K EEPROM 24C08.
It offers significant advantages in low-power and low-voltage applications. The 24C08 EEPROM uses the I²C
addressing protocol and 2-wire serial interface which includes a bidirectional serial data bus synchronized by the clock.
Best regards,
Losic Tihomir
mikroElektronika [Support team]