what will be the code in setting the config word in mikroC for pic..?..can anyone give me a sample program so i can set all fuses of pic16f877a...plz help!..
tnx...
config_word
-
- Posts: 619
- Joined: 05 Jul 2008 06:05
- Location: Thailand
Re: config_word
In MikroC the PIC configuration is set up at the start of a new project via a dialog box. If you upgrade to MikroC PRO the whole process is much easier and the dialog box gives a much clearer explanation of the settings. You can change these settings at any time under the Project -> Edit Project menu.
Further settings can be done in your program code and there are many examples of this in the included code samples.
Further settings can be done in your program code and there are many examples of this in the included code samples.
Re: config_word
Hello Charlie,
In the travel to get a MCU configured there are more than one way to get it, let's see;
1- You can start a new project using the project wizard that comes with mikroC, this wizard will guide you in the proccess to configure the PIC, select clock and even it will include the libraries that you will need. This is the easiest way to cofigure your project.
2- Another way to get the same configuration is to open a new document an save it as a .c file, then in the project menu it is possible for you to change the values mikroc loads by default, in this submenu you will find a bit of options to change in order to configure the PIC.
In the travel to get a MCU configured there are more than one way to get it, let's see;
1- You can start a new project using the project wizard that comes with mikroC, this wizard will guide you in the proccess to configure the PIC, select clock and even it will include the libraries that you will need. This is the easiest way to cofigure your project.
2- Another way to get the same configuration is to open a new document an save it as a .c file, then in the project menu it is possible for you to change the values mikroc loads by default, in this submenu you will find a bit of options to change in order to configure the PIC.
Best Regards
Omar Galicia
Mexico City
Omar Galicia
Mexico City
- ranko.rankovic
- Posts: 433
- Joined: 11 Jun 2010 09:22
Re: config_word
Hello charliemayati,
As Sobrietytest and braus said. First try out our new compiler, and you will see the benefit of the new IDE.
The settings are automated so you don't need to worry alot.
Thanks to you guys for answering.
Best regards
As Sobrietytest and braus said. First try out our new compiler, and you will see the benefit of the new IDE.
The settings are automated so you don't need to worry alot.
Thanks to you guys for answering.
Best regards
Ranko Rankovic
mikroElektronika [Support Department]
mikroElektronika [Support Department]
-
- Posts: 6
- Joined: 30 Jul 2010 17:26
Re: config_word
thanks for all the answers guys...may i asked how much will it cost me if i buy the license of mikroc pro for pic 2009?....or is there a place in manila(philippines) where i can buy this software...
Edited by Administrator: Posting or mentioning illegal content is not allowed!
Edited by Administrator: Posting or mentioning illegal content is not allowed!
- ranko.rankovic
- Posts: 433
- Joined: 11 Jun 2010 09:22
Re: config_word
charliemayati,
You are on official forum of mikroElektronika, asking for illegal software (especially our products) and usage of them is forbidden, nor we'll give any support for those.
This is WARNING for every member of this community!
You can buy our products directly form web site, here you can see more info about mikroC PRO for PIC.
Best regards
You are on official forum of mikroElektronika, asking for illegal software (especially our products) and usage of them is forbidden, nor we'll give any support for those.
This is WARNING for every member of this community!
You can buy our products directly form web site, here you can see more info about mikroC PRO for PIC.
Best regards
Ranko Rankovic
mikroElektronika [Support Department]
mikroElektronika [Support Department]
Re: config_word
Hey ranko take it easy friend, I did not see that chraliemayati were asking for an illegal copy of mikroC, charlie only asked for a place where he can buy the software.
Best Regards
Omar Galicia
Mexico City
Omar Galicia
Mexico City
- ranko.rankovic
- Posts: 433
- Joined: 11 Jun 2010 09:22
Re: config_word
Hello braus,
No offence mate, but as you can see in his post, I edited it:
Cheers
No offence mate, but as you can see in his post, I edited it:
stuff that is not suppose to be seen is deleted....Edited by Administrator: Posting or mentioning illegal content is not allowed!
Cheers
Ranko Rankovic
mikroElektronika [Support Department]
mikroElektronika [Support Department]