With Strg+D I can get a Paramter list vor many, BUT
GPIO_Digital_Output(@GPIOA_BASE, _GPIO_PINMASK_ALL); // Set PORTA as digital output
GPIO_Alternate_Function_Enable(@_GPIO_MODULE_SPI3_PB345);
GPIO_Alternate_Function_Enable(@_GPIO_MODULE_SWJ_JTAGDISABLE );
If I NOW go to @_Gpioxxxx and press Control+D I also get a super overview
like at the bottom, only how do I get this overview, if I have NOT already the parameter???
If I go to GPU_Alternate_Function and there Control+D, comes nothing useful as help
// _GPIO_MODULE_PARTIALREMAP_TIM1 ={(unsigned long)0x00160040}, /*!< TIM1 Partial Alternate Function mapping */
// _GPIO_MODULE_FULLREMAP_TIM1 ={(unsigned long)0x001600C0}, /*!< TIM1 Full Alternate Function mapping */
// _GPIO_MODULE_PARTIALREMAP1_TIM2 ={(unsigned long)0x00180100}, /*!< TIM2 Partial1 Alternate Function mapping */
// _GPIO_MODULE_PARTIALREMAP2_TIM2 ={(unsigned long)0x00180200}, /*!< TIM2 Partial2 Alternate Function mapping */
// _GPIO_MODULE_FULLREMAP_TIM2 ={(unsigned long)0x00180300}, /*!< TIM2 Full Alternate Function mapping */
// _GPIO_MODULE_PARTIALREMAP_TIM3 ={(unsigned long)0x001A0800}, /*!< TIM3 Partial Alternate Function mapping */
// _GPIO_MODULE_FULLREMAP_TIM3 ={(unsigned long)0x001A0C00}, /*!< TIM3 Full Alternate Function mapping */
// _GPIO_MODULE_REMAP_TIM4 ={(unsigned long)0x00001000}, /*!< TIM4 Alternate Function mapping */
// _GPIO_MODULE_REMAP1_CAN1 ={(unsigned long)0x001D4000}, /*!< CAN1 Alternate Function mapping */
// _GPIO_MODULE_REMAP2_CAN1 ={(unsigned long)0x001D6000}, /*!< CAN1 Alternate Function mapping */
// _GPIO_MODULE_REMAP_PD01 ={(unsigned long)0x00008000}, /*!< PD01 Alternate Function mapping */
// _GPIO_MODULE_REMAP_TIM5CH4_LSI ={(unsigned long)0x00200001}, /*!< LSI connected to TIM5 Channel4 input capture for calibration */
// _GPIO_MODULE_REMAP_ADC1_ETRGINJ ={(unsigned long)0x00200002}, /*!< ADC1 External Trigger Injected Conversion remapping */
// _GPIO_MODULE_REMAP_ADC1_ETRGREG ={(unsigned long)0x00200004}, /*!< ADC1 External Trigger Regular Conversion remapping */
// _GPIO_MODULE_REMAP_ADC2_ETRGINJ ={(unsigned long)0x00200008}, /*!< ADC2 External Trigger Injected Conversion remapping */
// _GPIO_MODULE_REMAP_ADC2_ETRGREG ={(unsigned long)0x00200010}, /*!< ADC2 External Trigger Regular Conversion remapping */
// _GPIO_MODULE_REMAP_ETH ={(unsigned long)0x00200020}, /*!< Ethernet remapping (only for Connectivity line devices) */
// _GPIO_MODULE_REMAP_CAN2 ={(unsigned long)0x00200040}, /*!< CAN2 remapping (only for Connectivity line devices) */
// _GPIO_MODULE_REMAP_SWJ_NOJTRST ={(unsigned long)0x00300100}, /*!< Full SWJ Enabled (JTAG-DP + SW-DP) but without JTRST */
_GPIO_MODULE_SWJ_JTAGDISABLE : Module_Struct =(
(0xFFFFFFFF),
(0xFFFFFFFF),
dword(0x00300200) or __ENABLE_REMAP); //*!< JTAG-DP Disabled and SW-DP Enabled */
_GPIO_MODULE_SWJ_JTAGENABLE : Module_Struct =(
(0xFFFFFFFF),
(0xFFFFFFFF),
How do I find Alternative Parameters in Compiler?
- IvanJeremic
- mikroElektronika team
- Posts: 316
- Joined: 05 Sep 2022 14:32
Re: How do I find Alternative Parameters in Compiler?
Hi,
Can you tell me for what Compiler does this happen specifically?
Regards,
Ivan.
Can you tell me for what Compiler does this happen specifically?
Regards,
Ivan.
Re: How do I find Alternative Parameters in Compiler?
Vielleicht, habe ich mich undeutlich ausgedrückt.
Es handelt sich nicht um einen Fehler.
Es geht mir nur darum, wie ich alle möglichen Parameter angezeigt bekomme die vorhanden sind, da es immer noch kein fertiges manual für mikroeC for Arm gibt z.B.
Es handelt sich nicht um einen Fehler.
Es geht mir nur darum, wie ich alle möglichen Parameter angezeigt bekomme die vorhanden sind, da es immer noch kein fertiges manual für mikroeC for Arm gibt z.B.
Re: How do I find Alternative Parameters in Compiler?
Hi,
Can you please write your post in English ?
Regards,
Filip.
Can you please write your post in English ?
Regards,
Filip.
-
- Posts: 137
- Joined: 02 Jan 2020 19:00
Re: How do I find Alternative Parameters in Compiler?
Soweit ich sehen kann, wurden PRO-Compiler schon lange aufgegeben.
Re: How do I find Alternative Parameters in Compiler?
Perhaps, I have expressed myself unclearly.
It is not about an error.
I just want to know how to display all possible parameters that are available, since there is still no ready manual for mikroeC for Arm, for example.
It is not about an error.
I just want to know how to display all possible parameters that are available, since there is still no ready manual for mikroeC for Arm, for example.