Filter Product By
Slide and select filter/s
Filtered by
Current Limit 6 Click is a compact add-on board representing a current-limiting solution. This board features the MAX17608, adjustable overvoltage, and overcurrent protection device from Analog Devices. This Click board™ is ideal for protecting systems with the flexible input overvoltage protection range from 4.5V to 60V, and the adjustable input...
POT 4 Click is a compact add-on board with accurate selectable reference voltage output. This board features the PRS11R-425F-S103B1, a high-quality 11mm rotary 10k potentiometer from Bourns. The PRS11R-425F-S103B1 features a small form factor, offers an push-on momentary switch, a flatted shaft style, and a wide operating temperature range. It comes with...
AudioAMP 11 Click is a compact add-on board suitable for reproducing input audio signals with the desired level of volume and power on the output elements that produce sound. This board features the NAU8224, a high-performance stereo Class-D audio amplifier from Nuvoton Technology. This flexible I2C configurable audio amplifier can drive a 4Ω load with up...
Pressure 17 Click is a compact add-on board that contains a board-mount pressure sensor. This board features the BM1390GLV-Z, a high-precision piezoresistive pressure sensor from Rohm Semiconductor. The BM1390GLV-Z comes with a configurable host interface that supports I2C serial communication and measures pressure in a range from 300hPa up to 1300hPa...
BIGPIC6 80-pin TQFP MCU Card with PIC18F8520 Microcontroller.
Not a programming expert, but you have the talent to build a great user interface? Don't worry! Visual TFT will do the hard job for you. You just focus on the design of you TFT GUIs, and the software will handle the rest.
The Buck-Boost 3 click is a voltage converter/regulator, which is able to provide a regulated voltage of 3.3V or 5V on the output, even when the input voltage drops under 3V. This is possible thanks to the ISL85403, a specialized buck-boost voltage converter IC which features an integrated high-side MOSFET and a low-side driver, that can be used to drive...
MCU Card is a standardized add-on board, which allows very simple installation and replacement of the microcontroller unit (MCU) on a development board equipped with the MCU Card socket. By introducing the new MCU Card standard, we have ensured the absolute compatibility between the development board and any of the supported MCUs, regardless of their pin...
Current 4 Click is a compact add-on board that provides a precise and accurate current sensing solution. This board features the INA250, a bidirectional, zero-drift current-shunt monitor from Texas Instruments. This voltage-output, current-sensing amplifier measures the voltage developed across the internal current-sensing resistor when current passes...
CODEGRIP for AVR is a fast USB-C and WiFi programmer and hardware debugger. It supports AVR based MCUs. The package contains: Damage resistant protective box CODEGRIP for AVR WiFi Antenna right angle SMA User Manual USB-C cable USB-C Female to USB-A Male Adapter Flat Cable with 10-pin 0.10" pitch female connectors
GNSS 11 Click is a compact add-on board that provides fast positioning capability. This board features the EVA-M8M, a concurrent GNSS module from u-blox. The module provides a reception of GPS, GLONASS, Galileo, QZSS, SBAS, and BeiDou. It delivers high sensitivity and minimal acquisition times, with concurrent reception of up to three GNSS, achieved by a...
10x10 RGB 2 Click is a compact add-on board designed for creating vibrant LED displays and lighting solutions. This board features the IN-PC20TBT5R5G5B, an RGB LED with an advanced IC for seamless operation from Inolux. The board features a 10x10 matrix of "smart" RGB LEDs capable of dual-wire transmission and a sophisticated control circuit for dynamic...
Stepper 22 Click is a compact add-on board designed for precise motion control of bipolar stepper motors and brushed DC motors. This board features the DRV8711, a bipolar stepper motor gate driver from Texas Instruments, which uses external N-channel MOSFETs to drive motors with up to 5A of output current. The board features a wide range of microstepping...
BIGPIC6 80-pin TQFP MCU Card with PIC18F8722 Microcontroller.
A high-quality cost-effective 5" TFT display with a resistive touch screen and a metal mounting frame for easier integration. Easy to use with MikroElektronika development tools.
Tamper 2 click contains a levered D2HW-A221D switch by Omron, which outputs signal in both positions - pressed and released. Omron switches, also known as microswitches, are well renowned for their reliability and endurance. The PCB of this click is designed so that the lever of the microswitch is easily accessible, making the click useful for all kinds...
MCU Card is a standardized add-on board, which allows very simple installation and replacement of the microcontroller unit (MCU) on a development board equipped with the MCU Card socket. By introducing the new MCU Card standard, we have ensured the absolute compatibility between the development board and any of the supported MCUs, regardless of their pin...
Timer Relay Click is a compact add-on board that allows you to control the load with a timer. This board features the NE555, a precision timer from Diodes Incorporated. It is a precision timing circuit capable of producing accurate time delays in a monostable mode of operation. The Timer Relay Click features the SRD-5VDC-SL-C, a relay from Ningbo, to...
7-SEG 2 Click is a compact add-on board that represents an easy solution for adding a numeric or hexadecimal display to your application. This board features the LDT-M2804RI, a three-digit seven-segment display from Lumex. The display has a 0.28” height, red LED segments, gray faces, and white diffused segments. All three digits come with a following dot...
WiFi NORA Click is a compact add-on board that provides WiFi and BLE connectivity for professional-grade applications. This board features the NORA-W366-00B6-00B, a dual-band WiFi module with Bluetooth Low Energy (BLE) from u-blox, offering support for WiFi 4 (802.11a/b/g/n) in both 2.4 and 5GHz bands and Bluetooth v5.3 with peripheral and central roles....
Clicker 4 Inverter Shield 2 is an extension for Clicker 4 series boards from MIKROE. It is the perfect way to expand the functionalities of your Clicker 4 board to provide highly efficient control and drive solutions for brushless DC (BLDC) motors. NOTE: The Clicker 4 Inverter Shield 2 is compatible with the CLICKER 4 for TMPM4K or CLICKER 4 for TMPM3H...
Light Temp Click is a dual-channel LED driver, designed to be used in tunable Smart Connected Lighting (SCL) applications. It is based on the AL1782, a dual-channel PWM dimmable linear LED driver. By utilizing a high-frequency E-flicker free technology with Deep Dimming capability, it can be used in both single-channel dimmable white and dual-channel...
Pressure 9 click is a digital barometric air pressure sensor Click board™. It is equipped with the DPS422, barometric air pressure sensor, based on a capacitive sensor element. Besides the pressure, this sensor can also measure temperature. Measurement data is available over the I2C or SPI interface, along with the factory calibrated coefficients, used...
for STM32F7 CAPACITIVE FPI with bezel Rapid development of multimedia and gui-centric applications
Loading
Load more
Loading
