Filter Product By
Slide and select filter/s
Filtered by
Temp&Hum 2 click is a smart temperature and humidity sensor click board™, packed with features, that allow easy and simple integration into any design that requires accurate and reliable humidity and temperature measurements. It measures a wide range of temperature and relative humidity values with a great accuracy. The Si7034 sensor IC from Silicon...
ISM TX Click is a compact add-on board that contains an ASK and (G)FSK transmitter with a programmable SPI interface. This board features the MAX41460, a UHF sub-GHz ISM/SRD transmitter designed to transmit On-Off Keying (OOK), Amplitude- Shift Keying (ASK), Frequency-Shift Keying (FSK), and Gaussian (G)FSK (or 2GFSK) data from Analog Devices. The fast...
Compass 7 Click is a compact add-on board perfect for applications like an electronic compass. This board features the MMC5633NJL, a monolithic complete 3-axis AMR magnetic sensor with on-chip signal processing and an integrated digital bus from MEMSIC. It can measure magnetic fields within the full-scale range of ±30 Gauss (G) with up to 0.0625mG per LSB...
BarGraph 3 click is equipped with a five-segment LED bar graph display, notable for its strong and uniform illumination of the segments. Each segment consists of three internal LEDs with a common cathode, while the anodes of all LEDs are connected in a single point. This reduces the number of the display bar pins to just six. The common anode is connected...
ADC 16 Click is a compact add-on board that contains a high-performance data converter. This board features the ADS7142-Q1, a low-power two-channel 12-bit analog-to-digital converter from Texas Instruments. This I2C configurable 140kSPS successive approximation register (SAR) analog-to-digital converter (ADC) can autonomously monitor signals while...
Thermo 18 Click is a compact add-on board that provides an accurate temperature measurement. This board features the WSEN-TIDS, a silicon-based, high-precision digital temperature sensor with embedded analog and digital signal processing unit from Würth Elektronik. This temperature sensor, characterized by its high accuracy (up to ±0.25 °C typical) and...
Charger 18 Click is a compact add-on board representing a single-cell battery charger. This board features the LTC3553, a micropower, highly integrated power management, and battery charger for single-cell Li-Ion/Polymer battery applications from Analog Devices. Designed specifically for USB applications, it also includes a PowerPath manager with...
Slide Switch TS-13CQN (SS-12D10G5) is a rectangular mechanical switch from ELECSOUND that slides vertically from the open (OFF) position to the closed (ON) position, allowing control of a circuit’s current flow without having to splice a wire manually. It can withstand current and voltage ratings up to 1.5A and 125VAC, ensuring endurance and reliability...
A high-quality cost-effective 5" TFT display with a projected capacitive touch screen and decorative cover glass (white bezel). Well integrated with MikroElektronika tools. Also available with black bezel.
Convert TSSOP-SSOP 28 pins (300 mil wide) package to DIP 28 pins.
Air Flow Click is a compact add-on board that contains a flow-based 2-in-1 differential pressure sensor. This board features the LHDULTRAM012UB3, LHD ULTRA series micro-flow differential pressure sensor from First Sensor (part of TE Connectivity). This pressure sensor is based on thermal flow measurement of gas through dual micro-flow channels integrated...
SpeakUp 3 Click is a compact add-on board providing an offline speech recognition solution. This board features the VC-02, a low-cost pure offline speech recognition module developed by Ai-Thinker Technology. The VC-02 module uses an integrated voice chip US516P6 based on a 32-bit RISC architecture core, a DSP instruction set for signal processing and...
A high-quality cost-effective 7" TFT display with a resistive touch screen and a metal mounting frame for easier integration. Easy to use with MikroElektronika development tools.
A smart display solution, mikromedia HMI 4.3" UXW has a 480x272px color display with a capacitive touch panel and decorative white bezel on the front, and a powerful FT900Q 32-bit MCU with additional essential circuitry on the back - making it a standalone but cost-effective solution suitable for industrial applications.
SPI Isolator 4 Click is a compact add-on board that contains a digital isolator optimized for a serial peripheral interface. This board features the ADuM341E, a quad-channel 5kVRMS digital isolator from Analog Devices. This isolation component provides outstanding performance by combining high speed, complementary metal-oxide-semiconductor (CMOS), and...
A smart display solution, mikromedia HMI 4.3" UXB has a 480x272px color display with a capacitive touch panel and decorative black bezel on the front, and a powerful FT900Q 32-bit MCU with additional essential circuitry on the back - making it a standalone but cost-effective solution suitable for industrial applications.
We wanted to show you how simple is to add wireless control feature to your embedded device using WiFi PLUS click boards. Fancy touchscreen interface implemented on mikromedia for PIC18FJ allows you to view ADC acquisition, digital input and to control digital output on EasyPIC v7 board. WiFi PLUS click board features MCW1001 companion controller with...
Boost 3 Click is a compact add-on board that contains a boost converter with an integrated current mirror function. This board features the TPS61391, a 700-kHz pulse-width modulating (PWM) Step-Up converter with a 70V switch FET with an input voltage up to 5.5V from Texas Instruments. The TPS61391 includes an accurate current mirror, with two selectable...
GNSS Active FPC Antenna (W3908B0100) is a reliable and durable flat patch antenna for GNSS receivers, tracking, and location-based services. With a compact size of 20x26.8mm, frequency range of 1.56-1.61GHz, 0.3dBi gain, and omni radiation pattern, this antenna is optimized for efficiency. It has a 50Ω nominal impedance and a 3W power rating, and comes...
NFC 6 Click is a compact add-on board that contains an NFC transceiver for contactless communication. This board features the ST25R95, a near-field communication transceiver from STMicroelectronics. It supports reader and writer operating modes and emulates ISO/IEC 14443-3 Type A cards. The RF communications are done over the 13.56MHz. The transceiver...
SPI Isolator 2 Click is a compact add-on board that contains a digital isolator optimized for a serial peripheral interface. This board features the ISO7741, a high-performance quad-channel digital isolator with a double capacitive silicon dioxide insulation barrier capable of galvanic isolation up to 5000Vrms from Texas Instruments. The ISO7741 provides...
mikroPascal PRO for PIC32 Buy now Download
ECG/GSR Click is a compact add-on board representing a complete solution for the development of ECG and GSR applications. This board features the AS7030B, a vital sign sensor based on Photoplethysmography (PPG) and Electrocardiogram (ECG) operations from AMS-AG. This vital-sign sensor features a low noise analog front end, a single device integrated...
Loading
Load more
Loading
