Filter Product By
Slide and select filter/s
Filtered by
BLE 6 Click is a Bluetooth low energy system-on-chip application processor certified module, compliant with BT specifications v5.0 and BQE qualified. The featured BlueNRG-M2 module developed by STMicroelectronics supports multiple roles simultaneously and can act at the same time as Bluetooth master and slave device. The BlueNRG-M2 is based on the...
dsPIC-Ready4 Board dsPIC-Ready4 Board is the best solution for fast and simple development of 28-pin dsPIC30F microcontroller applications (dsPIC30F1010, dsPIC30F2020 etc.). It includes connectors for connecting the dsPICprog with mikroICD in-system stand-alone programmer. These connectors enable you to program microcontrollers without any other...
The BIGdsPIC6 is a development system for 64- and 80-pin dsPIC30F devices. Board is delivered with a MCU card that contains dsPIC30F6014A. The system features a USB 2.0 programmer with mikroICD and many peripheral modules such as Piezo speaker, EEPROM, FTDI, RTC, CAN, etc.
Magneto Click is a compact add-on board containing an accurate and reliable magnetic sensing device. This board features ams AG’s AS5048A, a 360° angle position sensor with a 14-bit high-resolution output. The AS5048A measures the absolute position of the magnet’s rotation angle, consisting of Hall sensors, analog-digital converter, and digital signal...
8-pin I2C Click is a compact add-on board that represents a breakout board that simplifies the connection of add-on boards with 8 pin Female Connector to mikroBUS™ socket. This board can be used as I2C Adapter with no main component on itself, with only an on-board connector for connection establishing. 8-pin I2C Click has no regional restrictions, no...
This bundle provides a narrow-band power line communication (N-PLC) solution that uses existing electrical power lines to transmit data signals. It allows users to easily combine the N-PLC Click based on the ultimate N-PLC transceiver, the SM2400, from Semitech with N-PLC Wall Adapter (power line communication AC coupling circuit) to deliver a flexible...
WiFi 2.4GHz/5.4GHz Active FPC Antenna (W3918B0100) is a small but powerful flat patch antenna that operates in two different frequency ranges, offering dual-frequency capabilities with central frequencies of 2.4GHz and 5.4GHz. Measuring just 35.2x8.5x0.15mm, this antenna is incredibly efficient and has a nominal impedance of 50Ω. Besides the 2W power...
Turbidity Click Bundle: This bundle gives you everything you need to take high-accuracy turbidity measurements. It allows users to combine Turbidity Sensor with Turbidity Click via an additional 3-wire Male to Male Cable - 15 cm to measure the relative clarity of any liquid. Turbidity Click Bundle gives you everything you need to measure the density of...
Slider click features a mechanical slide action potentiometer - a slider, which gives a nice feeling when actuating, along with 16 SMD LEDs, that can be used for any kind of visual feedback. The onboard high-resolution 22-bit ADC can detect even the smallest move, faithfully capturing the smoothness of the slider movement, while digitizing its position....
Fusion for PIC v8 is packed in the protective box along with the relevant documentation.This box is very resistant to all kinds of damage and shock. The package contains: Damage resistant protective box Fusion for PIC v8 board MCU and Display board flyers Adapter - USB-C Female to USB-A Male Adapter - USB Micro Female to USB-C Male USB-C...
4G LTE 2 Click - Voice (for North America) is a compact add-on board representing a secure-cloud multi-band solution offering universal connectivity and reliable performance. This board features the LARA-R6401, an ideal LTE Cat 1 solution for North America from u-blox, supporting all relevant LTE bands for use on AT&T, FirstNet, Verizon, or T-Mobile...
This bundle comes with the eINK click adapter and e-Paper display 1.54”. Which provides you an easy start of any project where the e-paper display is needed. The E-Ink technology is a reasonably new technology with a promising future, widely commercialized by the E-INK company. The content displayed on the E-INK (also known as E-Paper) display does not...
CO2 Click is a compact add-on board that contains Sensirion’s miniature CO2 sensor. This board features the STC31, a gas concentration sensor designed for high-volume applications. The STC31 utilizes a revolutionized thermal conductivity measurement principle, which results in superior repeatability and long-term stability. The outstanding performance of...
The SmartADAPT2 Board is an accessory board used to rearrange 16 I/O pins just by moving on-board jumpers in order to meet your specified needs. This board is ideal for configuring your prototype device I/O pins.
Reduce the TFT GUI development time considerably with mikroC, mikroBasic or mikroPascal for PIC32 and mikromedia for PIC32 development board. Buy this kit and save $80 USD.
Convert TSSOP-SSOP 28 pins (600 mil wide) package to DIP 28 pins.
mikroBasic PRO for AVR Buy now Download
EnOcean 2 Click is a compact add-on board that adds 2.4 gigahertz wireless communication to your application. This board features the TCM 515Z, a bidirectional transceiver gateway from EnOcean. It is based on the 2.4GHz IEEE 802.15.4 radio standard (Zigbee). It provides a transparent radio link between the EnOcean 2.4GHz device and an external host...
Temp-Hum 9 click is a smart temperature and humidity sensing click board™, packed with features that allow simple integration into any design. It can measure a wide range of temperature and relative humidity values with high accuracy. The SHTC3 sensors used on this Click board™ offers the complete measurement system: capacitive RH sensor, bandgap thermal...
Plastic pH Electrode BNC connector is the high accuracy pH probe. This plastic probe can be used on all pH meters that have a BNC connection. It's protected by a plastic body reducing the possibility of damage to the probe to a minimum. This probe can read the pH liquid value without any problem. This Plastic pH Electrode BNC connector is compatible with...
GainAMP 2 click is a 6-channel programmable gain amplifier, used to amplify signals on any of the 6 non-inverting input channels up to 32x, in eight discrete steps. The gain can be set via the SPI communication interface. The click has a high signal to noise ratio, a good bandwidth, and very low gain error. These features make it an ideal solution for...
WiFi 6 Click is a compact add-on board that offers ultra-low power wireless connectivity for any application. This board features the WF121-A, a self-contained WiFi module with an integrated antenna providing a fully integrated 2.4GHz 802.11b/g/n radio from Bluegiga. The 32-bit microcontroller under the hood makes an ideal product for embedded...
Reduce the TFT GUI development time considerably with mikroC, mikroBasic or mikroPascal for ARM and mikromedia 5 for TIVA development board. Buy this kit and save USD 80$.
MCU Card is a standardized add-on board, which allows very simple installation and replacement of the microcontroller unit (MCU) on a development board equipped with the MCU Card socket. By introducing the new MCU Card standard, we have ensured the absolute compatibility between the development board and any of the supported MCUs, regardless of their pin...
Loading
Load more
Loading
