Filter Product By
Slide and select filter/s
Filtered by
The Serial GLCD 240x128 Adapter Board is an effective, low-cost board used to connect your device to a 240x128 GLCD T6963C. The board has an on-board serial port expander MCP23S17 as well as a potentiometer used to adjust GLCD contrast.
RGB Driver click is an RGB LED driver, capable of driving RGB LED stripes, LED fixtures and other RGB LED applications that demand an increased amount of current and voltage. Besides the NCP5623B IC, a triple output RGB LED driver IC which uses I2C interface for the communication with a microcontroller (MCU), this Click board™ is equipped with three...
USB UART 4 click offers a USB to asynchronous serial data (UART) interface, allowing the microcontroller based designs to communicate with the personal computer, in a very simple way. It is equipped with the FT232RL, a very popular USB to UART interface IC, used on many MikroElektronika devices - both for its reliability and simplicity. USB UART click is...
MMC Ready Board The MMC Ready Board is a complete development solution for MMC/SD based mass storage devices. It is powered by the PIC18F252 device connected to the memory slot, connection pads and external programmer connector. MMC/SD Ready Card Board can easily become your fast data acquisition device. Because it has microcontroller on board, it can...
Reduce the TFT GUI development time considerably with mikroC, mikroBasic or mikroPascal for ARM and mikromedia for STM32 M4 board. Buy this kit and save USD 80$.
Charger 25 Click is a compact add-on board that contains a battery charger. This board features the BQ25792, a buck-boost battery charger with a dual-input selector, and a USB PD3.0 OTG output from Texas Instruments. It is fully integrated for 1-4 cell Li-Ion and Li-Polymer batteries. Designed specifically for USB applications, it also includes a Narrow...
Ethernet STM32F10x series Empty MCU Card. Card is not populated with components. Pin distance 100mil.
Temp&Hum 12 click is a smart environmental temperature and humidity sensor Click board™, packed with features which allow easy and simple integration into any design that requires accurate and reliable humidity and temperature measurements. The capacitive-based sensor includes new integrated digital features and a heating element to dissipate...
Oximeter click is a versatile photometric Click board™, perfectly suited for measuring the blood oxygen saturation. It employs ADPD105, a highly configurable photometric front end (AFE) device from Analog Devices. Almost all parameters of the IC are user-configurable, allowing this AFE IC to be used on a wide range of various photometric applications. It...
PWR Meter click is a power measurement Click board™, capable of measuring voltage and current through the load, connected to either AC or DC power source. PWR Meter click uses the MCP39F511A, a very sophisticated monitoring IC from Microchip, with 16-bit processing core. It is used to calculate all the measurement parameters, returning values of multiple...
Tact Switch 6x6mm SMD (10pcs)
I2C 1-Wire 2 Click is a compact add-on board bridging I2C master interfaces with 1-Wire slave devices, ideal for simplifying complex communication protocols. This board features the DS2485, an advanced 1-Wire master with memory from Analog Devices. It features adjustable internal timers for precise 1-Wire signal management, relieving the host processor of...
Battery Holder AAA Cylindrical, BH-411-4A, Lead wires
Ribbon Cable 16-wire, Male/Female, 20 cm
8-pin I2C Click is a compact add-on board that represents a breakout board that simplifies the connection of add-on boards with 8 pin Female Connector to mikroBUS™ socket. This board can be used as I2C Adapter with no main component on itself, with only an on-board connector for connection establishing. 8-pin I2C Click has no regional restrictions, no...
This bundle provides a narrow-band power line communication (N-PLC) solution that uses existing electrical power lines to transmit data signals. It allows users to easily combine the N-PLC Click based on the ultimate N-PLC transceiver, the SM2400, from Semitech with N-PLC Wall Adapter (power line communication AC coupling circuit) to deliver a flexible...
WiFi 2.4GHz/5.4GHz Active FPC Antenna (W3918B0100) is a small but powerful flat patch antenna that operates in two different frequency ranges, offering dual-frequency capabilities with central frequencies of 2.4GHz and 5.4GHz. Measuring just 35.2x8.5x0.15mm, this antenna is incredibly efficient and has a nominal impedance of 50Ω. Besides the 2W power...
Turbidity Click Bundle: This bundle gives you everything you need to take high-accuracy turbidity measurements. It allows users to combine Turbidity Sensor with Turbidity Click via an additional 3-wire Male to Male Cable - 15 cm to measure the relative clarity of any liquid. Turbidity Click Bundle gives you everything you need to measure the density of...
Clicker 4 Inverter Shield is an extension for Clicker 4 series boards from MIKROE. It is the perfect way to expand the functionalities of your Clicker 4 board to provide highly efficient control and drive solutions for brushless DC (BLDC) motors. NOTE: The Clicker 4 Inverter Shield 2 is compatible with the CLICKER 4 for TMPM4K or CLICKER 4 for TMPM3H...
Stepper 10 Click is a compact add-on board that controls one stepper motor with a PWM constant current drive. This board features the TB67S128FTG, a two-phase bipolar stepping motor driver from Toshiba Semiconductor. It is fabricated using a BiCD process with an output rating of 50V/5A and a built-in decoder that can supply the motor with a voltage of up...
UVC Light Click is Click board™ with ultraviolet LEDs with 275nm wavelength which can be complemented with UVC Click for measuring exact dose of UV radiation. UVC radiation refers to wavelengths shorter than 280 nm. Because of the spectral sensitivity of DNA, only the UVC region demonstrates significant germicidal properties. As evident by multiple...
The E-Ink technology is a reasonably new technology with a promising future, widely commercialized by the E-INK company. The content displayed on the E-INK (also known as E-Paper) display does not degrade when exposed to direct sunlight, the display actually behaves like a real paper; it is more readable when there is more light hitting its surface....
Flash 10 Click is a compact add-on board representing a highly reliable memory solution. This board features the AT25FF321A, an SPI configurable 32Mbit (2Mx16) serial Flash memory solution from Dialog Semiconductor. The AT25FF321A is an ideal solution for systems in which program code is shadowed from Flash memory into embedded or external RAM (code...
H-Bridge 11 Click is a compact add-on board that allows a voltage to be applied across a load in either direction. This board features the MAX22200, an octal serial-controlled solenoid and motor driver from Analog Devices. The MAX22200 is SPI-configurable and rated for an operating voltage range from 4.5V to 36V. Each channel features a low impedance...
Loading
Load more
Loading
