Filter Product By
Slide and select filter/s
Filtered by
LCD Mono Click is a Click board™ that uses the LS013B7DH03 LCD display from Sharp which combined with the EFM32, from Silicon Labs, and its energy saving capabilities creates a powerful display application. The application is capable of driving a 128x128 pixel display drawing as little as 2 µA while showing a static image. Even when updating the frame...
Spectrometer Click features an 11-channel spectrometer for spectral identification and color matching applications. This Click board™ features the AS7341 from AMS-AG, whose spectral response is defined in the wavelengths from approximately 350nm to 1000nm. Control and Spectral data access are implemented through a serial I2C interface with very a low...
mikromedia 7 for STM32 Shield is the perfect way to expand the functionalities of your mikromedia 7 for STM32F4 and mikromedia 7 for STM32F7 with five mikroBUS™ sockets - add any functionality from 1645 of Click boards™. We are fully stocked with everything from sensors and wifi transceivers to motor control and audio amplifiers.
VREG Click is a compact add-on board with circuitry for digitally controlled DC voltage regulation. This board features the LM317M, an adjustable voltage regulator from STMicroelectronics. The VREG Click can regulate external power supplies over the screw terminals, but also the internal from the host board itself, in this case, 3.3 or 5V. The circuit...
OLED Switch Click is a compact add-on board that combines a button and a full-color organic LED display. This board features the ISC15ANP4, a programmable smart display from NKK Switches. It comes with an OLED display that acts as a push button in a single durable case, with dust-tight construction and long life of three million actuation minimum. The...
H-Bridge 3 Click is designed for the control of small DC motors and inductive loads, it features TLE9201SG a general purpose 6A H-Bridge perfectly suited for industrial and automotive applications. This IC meets the harsh automotive environmental conditions and it is qualified in accordance with the AEC-Q100 standard, also has set of features such as the...
ADC 15 Click is a compact add-on board that contains a high-performance data converter. This board features the ADS131M02, a two-channel, simultaneously sampling, 24-bit, delta-sigma (ΔΣ), analog-to-digital converter from Texas Instruments. The ADC inputs can be independently configured via serial peripheral interface depending on the sensor input. A low...
PSoC® TFT Expansion Board is a breakout board for a 2.8”, 320x240 px MI0283QT-9A TFT display. It's equipped with a microSD slot, and compatible with the CY8CKIT-050 PSoC® 5LP development kit.
EasyPIC PRO v7 is a full-featured development board for high pin-count 8-bit PIC® microcontrollers. It features USB Type-C CODEGRIP programmer/debugger. It contains many on-board modules necessary for development variety of applications, including graphics, Ethernet, USB, data logging and other. MIKROE-4459
Rectangular NFC 40x30 Antenna is PCB antenna designed with the intention to be used as extension of development boards and placed remotely on desired place such as plastic casing, existing products, or even under displays. Antenna is designed in circular shape with diameter of 40mm. Its important to mention that this antenna can be used for NFC and RFID...
Try the WunderBar and watch how yesterday's limits of App development for iOS and Android devices start melting away like a piece of chocolate on your tongue, releasing an abundance of new possibilities that will amaze and excite you. Kit contains WunderBar board, Casing, USB cable, Li-Ion battery, Li-Ion coin cell batteries, Tacky tapes, User manual
70 blue LEDs for displaying symbols and characters 7x10 B click is a LED dot matrix display click, which can be used to display graphics or letters in a very simple and easy way. The click board has two LED dot matrix modules with 7x5 stylish, round, dot-like LED elements. These displays produce clean and uniform patterns since the elements are...
MikroBoard for ARM 144-pin is primarily intended to be connected to the EasyARM v6 development system but can also be used as a stand-alone device.
mikroBasic PRO for dsPIC Buy now Download
NO2 2 Click is a gas sensor Click board™, equipped with the MiCS-2714, a compact metal oxide (MOS) sensor. This sensor reacts to the presence of nitrogen dioxide (NO2) and hydrogen (H2). Its impedance changes as a result of a catalytic reaction, allowing it to be used in a voltage divider configuration. This voltage can be sampled by an accurate A/D...
MCU Card is a standardized add-on board, which allows very simple installation and replacement of the microcontroller unit (MCU) on a development board equipped with the MCU Card socket. By introducing the new MCU Card standard, we have ensured the absolute compatibility between the development board and any of the supported MCUs, regardless of their pin...
Development kit for RGB LED matrix that includes: Matrix RGB click, 32x32 RGB LED Matrix Panel - 6mm pitch, 5V-3A power supply with EU plug (can power up up to two panels), accessories.
H-Bridge 7 Click features flexible motor driver IC for a wide variety of applications, labeled as the DRV8876N. This Click board™ integrates an N-channel H-bridge, charge pump regulator, and protection circuitry. The charge pump improves efficiency by allowing for both high-side and low-side N-channels MOSFETs and 100% duty cycle support. This IC allows...
This WiFi Rubber Antenna is an excellent choice for any Click board™ that features a WiFi module. The antenna has an right angle SMA male connector on its end, which allows it to be mounted directly on the Click board™ or the female SMA module connector.
Buggy is a robot rover platform expandable with all sorts of sensors and transceivers. A dream car for hackers and makers. Multiple kits available.
DC Motor 8 click is a DC motor driver. It can drive simple DC motors with brushes, providing them with a significant amount of current and voltage up to 40V. The click has one control input, that uses the PWM signal from the host MCU. It uses the half-bridge topology to regulate the speed of the motor rotation, employs advanced dead-time circuitry that...
UNI HALL Click is a compact add-on board representing a simple solution for adding a unipolar Hall switch to your design. This board features the US5881, a unipolar Hall-effect switch designed in mixed signal CMOS technology from Melexis Technologies. It is sensitive only to the North pole magnetic field, outputting a LOW logic level when exposed....
Cap Touch 2 click is a capacitive touch sensing Click board™ which features the CAP1166, an advanced touch/proximity sensor IC, packed with a range of different touch/proximity functionalities, allowing development of robust and aesthetically pleasing touch interfaces. Besides six touch sensitive channels, the sensor IC has six independent LED drivers,...
Silabs Click Shield An ideal platform for developing energy-friendly connected IoT solutions Start your IoT solution development with our Silabs Click Shield fast and easy. The Thunderboard™ and Starter Kit platforms, in combination with the mikroBUS™ socket, provides you immediate access to hundreds of Click boards™ in our offer, allowing you to...
Loading
Load more
Loading
