Filter Product By
Slide and select filter/s
Filtered by
I2C to CAN Click is a compact add-on board that contains I2C to CAN-physical transceiver, which extends a single-master I2C bus through harsh or noisy environments. This board features the LT3960, a robust high-speed transceiver that extends a single-master I2C bus up to 400kbps using the CAN-physical layer from Analog Devices. One LT3960 from SCL and SDA...
9DOF 3 Click introduces the BMX055, a small-scale absolute orientation sensor in the class of low-noise 9-axis measurement units, from Bosch Sensortec. It comprises the full functionality of a triaxial, low-g acceleration sensor, a triaxial angular rate sensor and a triaxial geomagnetic sensor. All three sensor components of the BMX055 can be operated and...
mikroC PRO for FT90x Buy now Download
3D Hall 3 click is a very accurate, magnetic field sensing Click board™, used to measure the intensity of the magnetic field across three perpendicular axes. It is equipped with the LIS2MDL, a low power 3D magnetic sensor. This IC has a separate Hall sensing element on each axis, which allows a very accurate and reliable measurement of the magnetic field...
4G LTE-AT&T click is an LTE Cat 1 / UMTS multimodecellular network solution, featuring the compact LARA-R2 series modem from Trasna. This module supports up to four LTE bands and up to two UMTS bands. It also features a full range of options for the high speed cellular networking and communication, such as the network indication, full embedded TCP/UDP...
HVAC Click is a compact add-on board that contains Sensirion’s next-generation miniature CO2 sensor. This board features the SCD41, a carbon dioxide sensor build on the photoacoustic sensing principle, and Sensirion’s patented PASens® and CMOSens® technology to offer high accuracy at a minor form factor. On-chip signal compensation is realized with the...
Click Shield for Nucleo-144 Empower your ideas with STM32 Nucleo-144 and your favorite Click boards™ Seamlessly develop with our Click Shield for Nucleo-144! Unleash the full potential of STM32 Nucleo-144 boards, coupled with mikroBUS™ sockets, granting you instant access to our extensive range of Click boards™. The possibilities are boundless - create...
M-BUS RF Click is a compact add-on board that contains a complete M-BUS RF digital data transceiver. This board features the ME70-169, a wireless M-BUS module compliant with the EN13757 part4 2013 from Telit Cinterion. The ME70-169 module is a multi-channel radio board, delivering up to 1W in the 169MHz ISM unlicensed frequency band. The frequency range...
Cheap and effective home-made SMS alarm solution. Make a compact alarm device with with minimum effort using PIC clicker, GSM click, Relay click and Motion sensor board. Kit also features right angle GSM antenna, four 1x8 stacking connectors as well as 10 Wire Jumpers (female-to-female).
The SerialRAM PROTO Board enables you to add a Serial RAM device to your prototype device. A 23K640 Serial RAM device is available on-board and communicates with microcontrollers via a Serial Peripheral Interface (SPI).
DAC 3 Click is a compact add-on board with a fully-featured, highly accurate digital-to-analog converter. This board features the MCP4726, a 12-bit voltage output digital-to-analog converter from Microchip. The MCP4726 has a rail-to-rail output, low power consumption, and EEPROM as non-volatile memory for storing DAC register and configuration bit values....
The SmartG100 Board is a uBlox Leon-G100 GSM/GPRS module development board. The switching power supply is available on-board, so that there is no need for additional components. An antenna is delivered with the board for a better signal quality.
LDC1000 Click is a compact add-on board that measures the inductance change a conductive target causes when it moves into the inductor's AC magnetic field. This board features the LDC1000, a low-power inductance-to-digital converter (LDC) for inductive sensing solutions from Texas Instruments. This SPI-configurable sensor requires only the frequency...
An XYZ Chromatic White Color Sensor Spectral click is a multispectral light sensing device, which uses the state-of-the-art sensor IC for a very accurate chromatic white color sensing. Spectral click provides a direct reading of the XYZ color coordinates, consistent with the CIE 1931 2° Standard Observer color coordinates. It provides mapping of the XYZ...
The RTC PROTO Board enables you to connect your prototype device with a Real-Time Clock (RTC). The board features the PCF8583 clock/calendar circuit based on a 2048-bit static CMOS RAM organized as 256 words each consisting of 8 bits.
Solderless breadboard with a total of 170 contact points. It’s made of black, white, red, blue and green plastics, conveniently small in size and can easily integrate into any design.
TFT Board 5 Capacitive is a 5" display board which features the standardized 2x20-pin display connector. The display board also integrates a capacitive multitouch panel with swipe and zoom gesture support. The TFT display module supports up to 24-bit pixel format (RGB: 888), allowing a true-color palette of 16,7 million colors, and resolution of 800 x...
TFT Proto 7" carries an 800x480 FRD070IF40-A TFT screen covered with a 4-wire resistive touchscreen panel.o drive the 262k-color display, there's an SSD1963 graphic controller with an 8/9/16/24-bit MCU interface.
Visual GLCD Buy now Download
The mikroBoard is miniature development tool which includes microcontroller, programer, small proto board and two 2x40 female headers for connection with UNI-DS6 development system.
Pressure 21 Click is a compact add-on board that contains a board-mount pressure sensor. This board features the BMP581, an absolute barometric pressure sensor from Bosch Sensortec. The BMP581 provides a relative accuracy of ±6Pa and typical absolute accuracy of ±30Pa with ultra-low noise, low power consumption, and temperature stability alongside...
A high-quality cost-effective 7" TFT display with a projected capacitive touch screen and decorative cover glass (black bezel). Well integrated with MikroElektronika tools. Also available with white bezel.
WiFi NINA Click is a powerful standalone WiFi module, equipped with the state-of-the-art NINA-W132 module from u-blox, that can be easily configured with the u-blox s-center software, using AT commands. WiFi NINA click offers a complete WiFi stack, it is really easy to use and provides a simple way to build secure IoT applications. This WiFi module...
Hexiwear Workstation expands the functionality of Hexiwear, your favorite IoT tool In the light of Hexiwear’s global success, we decided to make a full-featured development board that expands the functionality of your favorite IoT tool. The Hexiwear Workstation is the next step in rapid IoT prototyping. Note: Hexiwear is not included in the package....
Loading
Load more
Loading
