Filter Product By
Slide and select filter/s
Filtered by
PIR 2 Click is a compact add-on board designed for high-performance motion detection applications. This board features the ZSLM323511, a dual-element balanced differential pyroelectric (PIR) sensor from Zilog (Littlefuse). Key features include excellent EMI immunity, a low-profile surface mount package, and a typical field of view of 150 degrees on the...
Fan 9 Click is a compact add-on board designed for high-power fan applications requiring low noise and minimal vibration. This board features the A5932, an automotive-grade three-phase sinusoidal sensorless fan controller from Allegro Microsystems. This board operates with a power supply range of 12V to 42V, using a sinusoidal drive to reduce audible...
SiBRAIN Card is a standardized add-on board, which allows very simple installation and replacement of the microcontroller unit (MCU) on a development board equipped with the SiBRAIN socket. By introducing the new SiBRAIN standard, we have ensured the absolute compatibility between the development board and any of the supported MCUs, regardless of their...
Nickel-plated Brass NTC Thermistor Probe, the A1004BT22P0 thermistor from TE Connectivity, is a reliable temperature sensor designed for HVAC/R and surface sensing applications. The A1004BT22P0 combines precision with durability in a nickel-plated brass package. This probe features a 22 AWG zipcord wire with an open-end connection, a 3048mm (120-inch)...
BIGdsPIC6 80-pin TQFP 1 MCU Card Empty PCB
CODEGRIP for Tiva is a fast USB-C and WiFi programmer and hardware debugger. It supports ARM Cortex M4 based MCUs. The package contains: Damage resistant protective box CODEGRIP for Tiva CODEGRIP ADAPT V1 - 10 pin 0.10" pitch ARM Cortex Debug adapter WiFi Antenna right angle SMA User Manual USB-C cable USB-C Female to USB-A Male Adapter Flat...
MCU Card is a standardized add-on board, which allows very simple installation and replacement of the microcontroller unit (MCU) on a development board equipped with the MCU Card socket. By introducing the new MCU Card standard, we have ensured the absolute compatibility between the development board and any of the supported MCUs, regardless of their pin...
TFT Board 4 Capacitive with frame is a 4.3" display board which features the standardized 2x20-pin display connector. The display board also integrates a capacitive multitouch panel with swipe and zoom gesture support. The TFT display module supports up to 24-bit pixel format (RGB: 888), allowing a true-color palette of 16,7 million colors, and...
Power MUX 2 Click is a compact add-on board that contains a highly configurable power mux. This board features the TPS2121, a dual-input single-output power multiplexer with an automatic switchover feature from Texas Instruments. This Click board™ prioritizes the main supply when present and quickly switches to auxiliary supply when the main supply drops....
168 positions high-speed female SMT connector, compatible with SiBRAIN add-on boards.
Current 5 Click is a compact add-on board that provides a precise and accurate current sensing solution. This board features the INA381, a high-speed current-sense amplifier with an integrated comparator from Texas Instruments. This device has selectable operating modes (transparent or latched) and detects overcurrent conditions by measuring the voltage...
RTC 17 Click is a compact add-on board that accurately keeps the time of a day. This board features the RV5C387A, a CMOS real-time clock with a built-in interrupt generation function from Nisshinbo Micro Devices Inc, to perform serial transmission of time and calendar data to the MCU. The BU9873 provides information like year, month, day, weekday, hours,...
LED Ring 2 Click is a compact add-on board that provides a circular-shaped electronic lighting solution. This board features three I2C-configurable high-performance LED matrix drivers, the LP5862 from Texas Instruments. The LP5862 integrates 18 constant current sinks for driving 18 yellow LEDs. With the help of two additional LP5862 drivers, it is...
for STM32F7 Resistive Rapid development of multimedia and gui-centric applications BUILD GREAT GUI IN NO TIME Rich with peripherals Mikromedia 5 for STM32F7 Resistive is not limited to multimedia-based applications only. USB, Ethernet, WiFi and RF connectivity options, digital motion sensor, battery charging functionality, piezo-buzzer,...
Click Shield for FRDM-MCXN947 Expand your horizons with the Click Shield for FRDM-MCXN947! Enhance the FRDM-MCXN947 board's capabilities using mikroBUS™ sockets to access a wide array of Click boards™ instantly. Unlock new possibilities and innovate without limits with just one host board.
RGB Ring Click is a compact add-on board designed for dynamic and colorful lighting applications. This board features eight RGB LEDs (WL-ICLED 1312020030000) from Würth Elektronik, incorporating integrated circuits to control color mixing precisely. This board supports individual control of each LED's red, green, and blue components with single-wire...
To build a home-made breathalyzer all you need is a mikromedia for PIC32, a mikroBUS™ shield, an Alcohol click, and a Buzz click. And of course, a moderate quantity of alcohol (choose your own form factor). The video explains it all.
MCU Card is a standardized add-on board, which allows very simple installation and replacement of the microcontroller unit (MCU) on a development board equipped with the MCU Card socket. By introducing the new MCU Card standard, we have ensured the absolute compatibility between the development board and any of the supported MCUs, regardless of their pin...
168 positions high-speed male SMT connector, compatible with SiBRAIN add-on boards.
for PIC32MZ CAPACITIVE FPI with frame Rapid development of multimedia and gui-centric applications
PRESS Click is a compact add-on board that contains a board-mount pressure sensor. This board features the ILPS28QSW, an absolute digital output barometer from STMicroelectronics. It is a dual full-scale sensor with a measuring range of 260 up to 4060hPa. In addition, it comes with a Qvar detection ability, which is an electric charge variation detection...
Brushless 10 Click is a compact add-on board that provides precise control over brushless DC motors. This board features the TC78B016FTG, a 3-phase sine-wave PWM driver from Toshiba Semiconductor. The TC78B016FTG features Intelligent Phase Control for automatic motor phase adjustment, eliminating manual calibration, supporting an external power supply...
LTE IoT 17 Click is a compact add-on board designed for low-power, long-range cellular communication in IoT applications. This board features the SIM7070E, a multi-band LTE module from SIMCom that supports the European/Australian region's Cat-M, Cat-NB, and GSM modes. Key features include a maximum 589kbps downlink and 1.1Mbps uplink rate, support of...
Temp ISO Click is a compact add-on board for accurate and isolated temperature measurements in high-voltage environments. This board features the ISOTMP35-Q1, an automotive-grade isolated temperature sensor with analog output from Texas Instruments. This sensor integrates a robust isolation barrier with a withstand voltage of up to 3000VRMS, a linear...
Loading
Load more
Loading
