Filter Product By
Slide and select filter/s
Filtered by
Learn about programming the PIC microcontroller in BASIC with practical instructions. Following real-world projects, clear illustrations, and schematics, this book shows you, step-by-step, how to easily design and build PIC-based devices.
Type-K thermocouple with glass braid insulation is used for precision measurements of high temperatures. Thermocouple itself can measure up to 480°C (900°F). It is 2 meters long and ends with PCC-SMP connector which is compatible with THERMO click and Thermo click.
Reduce the development time considerably with mikroC, mikroBasic or mikroPascal for PIC compiler and EasyPIC v7 development system. Buy Easy Start Kit-PIC to get these goodies at reasonable price.
WiFi 3 Click is a compact add-on board that provides a low-power WiFi solution to a host MCU. This board features the ESP8266MOD, a WiFi module with a built-in TCP/IP protocol stack from Ai-Thinker. This fully integrated module uses the IEEE802.11b/g/n standard in the 2400-2483.5MHz ISM frequency band that can work in Station, Soft Access Point, and...
Heart Rate 4 Click is a compact add-on board for heart-rate monitoring applications. This board features the MAX30101, an integrated pulse oximetry and heart-rate monitor module from Analog Devices. The module includes internal LEDs, photodetectors, optical elements, and low-noise electronics with ambient-light-rejection circuitry, establishing...
Li-Polymer Battery 3.7V 130mAh - power your device.
Nano GPS Click is a compact add-on board that provides fast positioning capabilities. This board features the Nano Hornet ORG1411, a complete SiP GPS Patch-on-Top (PoT) module from OriginGPS. It is the industry’s smallest GPS module with an integrated patch antenna. This compact module features multi-channel GPS, with SBAS, QZSS, and other regional...
Altitude Click is a compact add-on board that allows height measurement of an object or point related to sea level or ground level. This board features the MPL3115A2, a MEMS pressure sensor providing accurate pressure/altitude and temperature data measurements from NXP Semiconductors. The MPL3115A2 provides 20-bit pressure/altitude and 12-bit temperature...
Battery Boost shield is an extension board pin-compatible with all mikroMMB boards from mikroElektronika that enables autonomous power supply using 2 x AAA batteries. Board features a compact monolithic integrated circuit MCP1640 that provides +4.0V power supply voltage.
PROTO Connect Board is used to connect a prototype device to external modules via a screw terminal. External connection is enabled via the screw terminal. Components available on the board are clearly marked, which makes connection easy.
Expand 2 Click is a compact add-on board providing general-purpose I/O expansion. This board features the MCP23017, a 16-bit resolution I/O expander with an I2C serial interface from Microchip. Any of the sixteen I/Os of the MCP23017 can be configured as an input or output by writing to the configuration register. It also features an interrupt feature,...
IrThermo Click 3.3V is a compact add-on board that allows contactless measurement of the object's temperature. This board features the MLX90614, a single and dual-zone infrared thermometer from Melexis. It encompasses both the thermopile sensor element and the ASSP, a signal conditioning circuitry that features 17-bit ADC and powerful DSP, which allow a...
OSD Click is a compact add-on board that adds a monochrome on-screen display (OSD) as an overlay layer over a video in an application without any external driver. This board features the MAX7456, a single-channel monochrome on-screen display generator from Analog Devices. In integrated EEPROM, the MAX7456 is preloaded with 256 characters or pictographs,...
ECG/EMG cable that is 1m in length and has a 3.5mm phone jack.
Bluetooth 2 Click features WT41u, a long range class 1, Bluetooth® 2.1 + EDR module from Silicon Labs. WT41u is a highly integrated and sophisticated Bluetooth® module, containing all the necessary elements from Bluetooth® radio and a fully implemented protocol stack. Therefore WT41u provides an ideal solution for developers who want to integrate...
mikroTFT is a breakout board for MI0283QT-9A 2.8" TFT color display with 320 x 240 pixel resolution, driven by ILI9341 display controller. TFT display is covered with a resistive touch panel which can be used as an input device.
PIC18F4520-I/P (DIP40/20MHz) microcontroller
mikroProg for 8051 is a standalone USB programmer for 8-bit Atmel AT89 (8051) microcontrollers. It is supported with mikroC, mikroBasic and mikroPascal compilers for 8051.
BLE P Click is a compact add-on board with a low-energy Bluetooth transceiver designed for operation in the peripheral role. This board features the nRF8001, a Bluetooth 4.0 transceiver from Nordic Semiconductor. The nRF8001 combines Radio, Link Layer, and Host into a single product with built-in stack features such as low-energy PHY layer, link layer...
FTDI Click is a compact add-on board that provides a high-speed USB to a serial interface converter. This board features the FT2232H, a 5th-generation high-speed USB 2.0 to a serial UART/I2C/SPI interface converter from FTDI. The entire USB protocol is handled on the chip (FTDI USB drivers required), making this board ideal for various USB applications....
mikroProg for Tiva is a fast programmer and hardware debugger. mikroProg supports all Stellaris and Tiva C Series ARM Cortex™-M3 and M4 devices.
The mikroBoard is miniature development tool which includes microcontroller, programer, small proto board and two 2x40 female headers for connection with UNI-DS6 development system.
4x4 RGB click is a matrix of 16 "intelligent" RGB elements, forming a 4x4 display screen. These LED elements feature internal logic, which allows them to communicate directly with the MCU. These intelligent LEDs are meant to be cascaded: the elements communicate by a single line with the host MCU and they feature a signal reshaping section, so the data...
CAN Board is a development tool for microcontrollers with integrated MCP2551 CAN transceiver used in connection with CAN network.
Loading
Load more
Loading
