Filter Product By
Slide and select filter/s
Filtered by
Proximity 12 Click is a compact add-on board that contains a high-performance light and proximity sensing solution. This board features the TMD3719, an optical sensor that integrates ambient light sensing, proximity detection, and flicker detection sensing from AMS-AG. This I2C configurable sensor has six concurrent ambient light sensing channels and a...
for PIC CAPACITIVE FPI with frame Rapid development of multimedia and gui-centric applications BUILD GREAT GUI IN NO TIME Rich with peripherals Mikromedia 3 for PIC CAPACITIVE is not limited to multimedia-based applications only. USB, digital motion sensor, battery charging functionality, SD card reader and much more expands its use...
Female socket, SMT, 2x20pin, 2.54mm (0.100") pitch, gold, push-pull, polarizing key
DAC 14 Click is a compact add-on board providing highly accurate digital-to-analog conversion. This board features the DAC53202, a 10-bit dual-channel programmable voltage/current-output DAC from Texas Instruments. The DAC53202 supports high-speed I2C and SPI serial interface alongside Hi-Z Power-Down mode and Hi-Z output during Power-OFF conditions. It...
Magnetic Rotary 6 Click is a compact add-on board for accurate magnet-position sensing. This board features the AS5247U, an SPI-configurable high-resolution dual rotary position sensor for fast absolute angle measurement over a full 360-degree range from ams AG. The AS5047D is equipped with revolutionary integrated dynamic angle error compensation (DAEC™)...
EEPROM 11 Click is a compact add-on board with a highly reliable, nonvolatile memory solution. This board features the S-34C04AB, an EEPROM for DIMM serial presence detection from ABLIC. The EEPROM is internally organized as 2 pages of 256 words x 8-bit, and a capacity of 4Kbits and is an EE1004-1 JEDEC standard-compliant. The page write and sequential...
Accel&Qvar Click is a compact add-on board for capturing precise acceleration measurements and detecting electric charge variations. This board features the LIS2DUXS12, an ultralow-power accelerometer from STMicroelectronics. Besides low power consumption, it also includes Qvar technology, artificial intelligence, and an anti-aliasing filter. This...
Tester 2 Click is a diagnostic Click board™ designed for real-time visual monitoring of mikroBUS™ pin logic levels. It features a 2x6 LED array controlled by SI2310 N-channel MOSFETs, providing reliable feedback on pin states and additional LEDs for monitoring the activity of +3.3V and +5V power rails. The board also includes a ClickID switch for using...
The LV18FJ Experimental board is used for programming LV18FJ MCU Cards. This board makes the programming process easier. You just need to place a card correctly and start programming your microcontroller.
Tamper click is equipped with SDS001, a low profile side-actuated detect switch, made by C&K company. This is a high-quality, low-current detection switch, which is designed in a form of a push button. The switch itself is very small - only 2mm of switch overtravel length, which coupled with its low actuation force, makes it ideal for using it as a...
MCU Card is a standardized add-on board, which allows very simple installation and replacement of the microcontroller unit (MCU) on a development board equipped with the MCU Card socket. By introducing the new MCU Card standard, we have ensured the absolute compatibility between the development board and any of the supported MCUs, regardless of their pin...
for STM32F4 CAPACITIVE FPI with bezel Rapid development of multimedia and gui-centric applications BUILD GREAT GUI IN NO TIME Rich with peripherals Mikromedia 3 for STM32F4 CAPACITIVE FPI with bezel is not limited to multimedia-based applications only. USB, digital motion sensor, battery charging functionality, SD card reader and much...
MCU Card is a standardized add-on board, which allows very simple installation and replacement of the microcontroller unit (MCU) on a development board equipped with the MCU Card socket. By introducing the new MCU Card standard, we have ensured the absolute compatibility between the development board and any of the supported MCUs, regardless of their pin...
The SMD Gray mikroBUS™ sockets, which come in a pack of 10, ensure a stronger design for easier interfacing with Click boards™. They feature horizontal supports between 8-pin connectors and a 45° chamfered lower edge, ensuring a perfect fit and alignment. All pins are clearly labeled for secure placement. These sockets are packaged in plastic anti-static...
This bundle allows you to quickly create various display applications based on a wide range of technologies, such as capacitive or resistive touch panels, OLED or TFT screen technology, and much more. The bundle includes two types of connectors male and female, that fully meet the DISCON displays standard. The connectors measure 51x5mm and consist of 40...
Barometer 9 Click is a compact add-on board ideal for precision activity tracking and indoor navigation/localization. This board features the ENS220, a barometric pressure and temperature sensor from ScioSense. This sensor is characterized by its ultra-low power consumption and high accuracy, offering capabilities through both I2C and SPI communication...
Current Sens 2 Click is a compact add-on board designed for precise current measurements in industrial applications. This board features the HO 10-P, an AC/DC current transducer from LEM USA. The HO 10-P offers galvanic isolation and reliable measurement of DC, AC, and pulse currents up to 10ARMS. Its open-loop Hall effect measuring principle ensures...
Stepper 27 Click is a compact add-on board designed for control of 2-phase stepper motors, enabling smooth, quiet, and high-resolution motion in embedded applications. It is based on the MAX22210, a highly integrated stepper motor driver from Analog Devices featuring two low-impedance H-bridges and a 128-microstep indexer. It includes non-dissipative...
for STM32F4 CAPACITIVE FPI with frame Rapid development of multimedia and gui-centric applications BUILD GREAT GUI IN NO TIME Rich with peripherals Mikromedia 3 for STM32F4 CAPACITIVE FPI with frame is not limited to multimedia-based applications only. USB, digital motion sensor, battery charging functionality, SD card reader and much...
HMI CAPACITIVE Rapid development of multimedia and GUI-centric applications BUILD GREAT GUI IN NO TIME Rich with peripherals The board integrates a microSD card for expanding storage capacity, a haptic feedback motor, small audio speaker, and a USB-C connector, expanding its use beyond the multimedia. Two standardized mikroBUS™ Shuttle...
Ambient 20 Click is a compact add-on board used to measure the amount of ambient light present. This board features the BU27030NUC, a 16-bit digital-output ambient light sensor with an I2C interface from Rohm Semiconductor. The BU27030NUC has a flexible and wide operating range of up to 20klx with a maximum resolution of 0.0007lux/count, providing an...
Magneto 13 Click is a compact add-on board with an accurate and reliable magnetic device. This board features the MA736, a contactless digital angle sensor from Monolithic Power Systems. It is a MagAlpha sensor that detects the absolute angular position of a permanent magnet, typically a diametrically magnetized cylinder or a rotating shaft. The MA736...
ADC 14 Click is a compact add-on board with a high-performance data converter. This board features the MAX11108A, a low-power serial ADC from Analog Devices. It includes a high-dynamic range sample-and-hold and a high-speed serial interface. This 12-bit resolution ADC with an integrated single-ended analog input connected to the ADC core can achieve up to...
Loading
Load more
Loading
