Filter Product By
Slide and select filter/s
Filtered by
ATA6503 Click is a compact add-on board for high-speed CAN FD communication in automotive and industrial applications. This board features the ATA6503, a fully integrated CAN FD System Basis Chip (SBC) from Microchip, meeting Grade 0 AEC-Q100 standards. It supports both Classical CAN and CAN FD protocols with data rates up to 8Mbit/s, features an...
LV-24-33 v6 80-pin TQFP 2 MCU Card Empty PCB
This Pedometer consists of a mikromedia for STM32-M4, a mikromedia Proto shield and LiPo battery. Let's measure how far you walked with this Let's make. A pedometer is a portable device that counts each step a person takes.
MCU Card is a standardized add-on board, which allows very simple installation and replacement of the microcontroller unit (MCU) on a development board equipped with the MCU Card socket. By introducing the new MCU Card standard, we have ensured the absolute compatibility between the development board and any of the supported MCUs, regardless of their pin...
for Kinetis CAPACITIVE FPI with bezel Rapid development of multimedia and gui-centric applications BUILD GREAT GUI IN NO TIME Rich with peripherals Mikromedia 3 for Kinetis CAPACITIVE FPI with bezel is not limited to multimedia-based applications only. USB, WiFi and RF connectivity options, digital motion sensor, battery charging...
Dot Matrix R Click is a display device Click board™ based on a four-digit dot matrix display module, labeled as HCMS-3906 from a company Avago (Broadcom Inc). The module holds four 5x7 dot matrices, with very closely spaced, bright red pixel elements. Characters are very clearly displayed as a result. Pixels emit a bright red color when lit, which makes...
DAC 11 Click is a compact add-on board that contains a highly accurate digital-to-analog converter. This board features the DAC128S085, a general-purpose OCTAL 12-bit analog voltage-output DAC from Texas Instruments. It uses both logic voltage levels from the mikroBUS™ socket with a maximum power consumption of 4.85mW at 5V. The on-chip output amplifiers...
Barometer 7 Click is a compact add-on board used to measure air pressure in a specific environment. This board features the KP264XTMA1, a high-accuracy digital barometric air pressure sensor based on a capacitive principle from Infineon Technologies. The KP264XTMA1 is surface micromachined with a monolithic integrated signal conditioning circuit...
Flash 9 Click is a compact add-on board that contains a highly reliable memory solution. This board features the W25Q02JV, an SPI configurable serial Flash memory solution from Winbond Electronics. It represents a four 512Mb stack die supporting linear addressing for the full 2Gb memory address range, offering flexibility and performance well beyond...
USB 2.0 Micro Female to USB Type C Male Adapter represents a high-speed type C connector that converts the USB-C 2.0 micro head data into the ordinary USB 2.0 data cable. It has a data transfer rate of up to 480Mbps and supports high-power charging and quick data transfer alongside a reversible plug orientation and cable direction. Based on its compact...
DIGI POT 13 Click is a compact add-on board that contains a digitally controlled potentiometer. This board features the MAX5419, a 256-tap non-volatile digital potentiometer from Analog Devices. On this Click board™, one digitally I2C-controlled potentiometer is realized with typical end-to-end resistance values of 200kΩ. It can operate from both 3.3V and...
IPD Click is a compact add-on board for controlling inductive and resistive loads in industrial automation and other demanding applications. This board features the TPD2017FN, an 8-channel low-side switch with MOSFET outputs from Toshiba Semiconductor. This component is directly compatible with CMOS and TTL logic, making it ideal for driving motors,...
IR Sense 5 Click is a compact add-on board designed for accurate, non-contact surface temperature measurement. This board features the ZTP-148SRC1, a thermopile IR sensor from Amphenol, with a measurement range from -20 to +100°C, an active area of 0.7x0.7mm², and a typical field of view of 85 degrees. The board also integrates an OPA2365AIDR OpAmp for...
DAC 16 Click is a compact add-on board, a digital-to-analog converter (DAC) designed for precise voltage and current output applications. This board features the DAC63204-Q1, an automotive-qualified 12-bit DAC from Texas Instruments. This Click board™ features four output channels with flexible configuration options, including adjustable voltage gains and...
IPS Display 3 Click is a compact add-on board that provides a high-quality visual interface through a 0.99-inch IPS TFT LCD, designed for applications where space is limited but reliable display performance is required. It is based on the ER-TFT0.99-2 display module from EastRising Technology, which integrates the GC9107 controller in a chip-on-glass...
MCU Card is a standardized add-on board, which allows very simple installation and replacement of the microcontroller unit (MCU) on a development board equipped with the MCU Card socket. By introducing the new MCU Card standard, we have ensured the absolute compatibility between the development board and any of the supported MCUs, regardless of their pin...
The Step Down 2 click is a Click board™ equipped with the L6986HTR, a synchronous step-down switching regulator with operating input voltages from 4V to 38V and output voltage adjustability ranges from 0.85 V to VIN. Because of the main possibilities its features offer, the Step Down 2 click is ideally used for programmable logic controllers (PLCs),...
TFT Color Display with Touch Screen (4.3") and decorative cover glass (black bezel) is a color active matrix thin film transistor(TFT) liquid crystal display (LCD).
pH Click is a compact add-on board that provides an opportunity for the user to read pH with the same accuracy and capabilities as with some other expensive solutions. This board features the pH EZO™, a 6th generation embedded pH circuit that offers the highest level of stability and accuracy from AtlasScientific. With an easy to use data protocol, simple...
MCU Card is a standardized add-on board, which allows very simple installation and replacement of the microcontroller unit (MCU) on a development board equipped with the MCU Card socket. By introducing the new MCU Card standard, we have ensured the absolute compatibility between the development board and any of the supported MCUs, regardless of their pin...
Piezo Buzzer (EPT-14A4005P) is an electronic device used to produce a tone, alarm, or sound from Sanco Electronic. This TH buzzer has a resonant frequency of 4000Hz, draws a maximum current of 2mA, and is an excellent choice for various applications including alarms and warning systems in automobiles and consumer electronics, and much more, thanks to its...
DC Motor 26 Click is a compact add-on board with a brushed DC motor driver. This board features the TB9053FTG, a PWM-type, dual-channel, H-bridge, brushed DC motor driver from Toshiba Semiconductor. The TB9053FTG is rated for an operating voltage range from 4.5V to 28V, with the motor controlled directly through a PWM signal or SPI serial interface. In...
Color 5 Click is a color sensing Click board™, which utilizes the P12347-01CT, integrated color sensing device. This sensor is able to sense red (R), green (G), and blue (B) component of the light, providing measurement via the I2C interface. Besides sensing R, G and B components, there is an IR sensor too, allowing this Click board™ to sense an intensity...
Loading
Load more
Loading
