Filter Product By
Slide and select filter/s
Filtered by
Buzz Click is a compact add-on board with a piezo speaker capable of emitting an audio signal. This board features the EPT-14A4005P, a piezoelectric transducer from Sanco Electronics. It is an electronic device that can be used to produce a tone, alarm, or sound. It has reasonable loudness with a minimum of 88dB at 10cm from the speaker. This Click board™...
MCP2517FD Click is a compact add-on board representing a complete CAN solution used as a control node in a CAN network. This board features the MCP2517FD and ATA6563, an external CAN FD controller with an SPI interface, and a high-speed CAN transceiver from Microchip. The ATA6563, a low-level physical layer IC (PHY), provides a physical connection with...
IrDA 2 Click is a compact add-on board providing a cost-effective solution for sending and receiving IR serial data. This board features the MCP2120, a Microchip’s high-performance fully-static infrared encoder/decoder for the infrared transceiver module, the TFDU4101 from Vishay semiconductor. The MCP2120 encodes an asynchronous serial data stream,...
RS485 Board is a tool for developing devices that use RS485 communication. The on-board ADM485 differential line transceiver is suitable for high speed bidirectional data communication on multipoint bus transmission lines.
WiFi ESP Click is a compact add-on board that provides wireless connectivity to your application. This board features the ESP-WROOM-02, a fully integrated WiFi module from Espressif. It provides wireless communication over the printed antenna and 2.4GHz frequency range (802.11b/g/n) and can be used in softAP (access point) WiFi mode, in WiFi station mode,...
LTE IoT Click is a compact add-on board that contains a complete and cost-efficient solution offering multi-band data transmissions for Low-Power Wide-Area solutions. This board features the SARA-R410M-02B, a cellular module that supports LTE CAT M1 and Narrowband 1 (NB1) technologies, developed with IoT applications in mind from u-blox. Designed for...
USB I2C Click is a compact add-on board that provides a general-purpose USB to I2C/UART serial interface conversion. This board features the MCP2221A, a USB 2.0 to I2C/UART protocol converter with additional GPIO functionality from Microchip. This Click board™ features Communication Devices Class (CDC) for USB-to-UART conversion and Human Interface Device...
nRF T Click is a compact add-on board that contains a complete RF digital data transceiver. This board features the nRF24L01P, a low-power, high-performance 2.4GHz GFSK transceiver from Nordic Semiconductors. The nRF24L01P transceiver is configurable through SPI serial interface and operates with only 3.3V in the worldwide ISM frequency band from 2400MHz...
The microSD Card Board enables you to solve your prototype device memory storage problems with microSD memory cards. Add data acquisition with microSD card to your prototype device easily.
EtherCAT Click is a compact add-on board that provides a cost-effective solution for realizing EtherCAT device solutions on various processors over the SPI interface. This board features the LAN9252, a 2-port EtherCAT device controller with dual integrated Ethernet PHYs from Microchip Technology. Each PHY contains a full-duplex 100BASE-TX transceiver and...
BarGraph Click is a compact add-on board with an LED bar graph display. This board features two SN74HC595Ds, 8-bit shift registers with 3-state output registers from Texas Instruments. The LED bar graph display consists of 10 red LEDs, and you can control each LED separately, including the light intensity. The segments of the onboard bar graph LED display...
Ready for PIC (DIP28) Ready for PIC (DIP28) Board is the best solution for fast and simple development of microcontroller applications using 28-pin PIC MCUs. It comes with PIC18F25K22 connected to 8MHz crystal oscillator. It contains four IDC10 headers for all available microcontroller ports, USB-UART module, prototyping area and a power supply circuit....
Flash Click is a compact add-on board representing a highly reliable memory solution. This board features the EN25Q80B, a serial flash memory from EON Electric. The capacity of this flash memory is 8 Megabit (1MB) with 256 uniform sectors, 4KB each, and features advanced write protection mechanisms. The used flash IC has excellent endurance and can...
Motion Click is a compact add-on board providing a motion detection sensitive only to live bodies. This board features the PIR500B, a pyroelectric sensor from Shenzhen Haiwang Sensor Co., which generates a voltage when exposed to infrared radiation emitted by live bodies. The signal from the PIR500B is further processed by a BISS0001, a PIR (Passive...
Pi Click Shield is an extension for Raspberry Pi®, the low-cost mini-computer. It's a simple shield with a mikroBUS™ host socket to make your Raspberry Pi compatible with 1645 different types of Click boards™.
VOLT is a smart USB Li-Polymer battery charger. It features power management circuitry which can charge the battery over USB connector. Using provided screw terminals VOLT can also be used to power your target device from battery or USB.
Current Click is a compact add-on board providing a complete current sensing solution. This board features the INA196, a current shunt monitor from Texas Instruments. The INA196 has voltage output that can sense drops across shunts at common-mode voltages from −16V to +80V, independent of its supply voltage. To measure current values in various bands,...
Click BOOSTER PACK is an extension for Texas Instruments Stellaris® LM4F120 LaunchPad. It carries single mikroBUS host socket, therefore bringing enormous flexibility and seamless integration of Click boards™ to your LaunchPad.
This right angle 868Mhz rubber antenna with vertical polarisation extends the range of devices like LoRa and EnOcean Click boards™.
Thermo 5 Click is a compact add-on board that accurately measures temperature. This board features the EMC1414, a multiple-channel temperature sensor with beta compensation from Microchip. The EMC1414 measures temperature in the default range of 0°C to 127°C and extended range of -64°C to 191°C with ±1°C accuracy. Thermo 5 Click can monitor four...
Two-Wire ETH Click is a compact add-on board with the purpose of a generic interface to many third-party processors in 10BASE-T1S applications. This board features the LAN8651B1-E/LM, a low-power single-port 10BASE-T1S MAC-PHY Ethernet Controller with SPI from Microchip. The LAN8651B1-E/LM combines a Media Access Controller (MAC) and an Ethernet PHY to...
Top selling AVR Development Board for over 64 Atmel AVR MCUs in DIP packaging. It features USB 2.0 programmer and many essential and usefull modules necessary in development. Board comes with ATMEGA32. Buy now The Best AVR® Board. Ever. Four connectors for each port Amazing Connectivity EasyAVR™ v7 is all about connectivity. Having four...
Clicker 2 for PIC32MX All the inventions waiting to happen... Clicker 2 is a battery-powered Click board™ two-seater. Inventing and putting together fully-functional standalone gadgets is now just 1% perspiration, and 99% inspiration!
The EasyPROTO Board solves your connecting problems by offering a complete, cost-effective solution. The board is connected to a prototype board via an IDC10 connector.
Loading
Load more
Loading
