Filter Product By
Slide and select filter/s
Filtered by
Slider click features a mechanical slide action potentiometer - a slider, which gives a nice feeling when actuating, along with 16 SMD LEDs, that can be used for any kind of visual feedback. The onboard high-resolution 22-bit ADC can detect even the smallest move, faithfully capturing the smoothness of the slider movement, while digitizing its position....
CO2 Click is a compact add-on board that contains Sensirion’s miniature CO2 sensor. This board features the STC31, a gas concentration sensor designed for high-volume applications. The STC31 utilizes a revolutionized thermal conductivity measurement principle, which results in superior repeatability and long-term stability. The outstanding performance of...
Flash 10 Click is a compact add-on board representing a highly reliable memory solution. This board features the AT25FF321A, an SPI configurable 32Mbit (2Mx16) serial Flash memory solution from Dialog Semiconductor. The AT25FF321A is an ideal solution for systems in which program code is shadowed from Flash memory into embedded or external RAM (code...
The SmartADAPT2 Board is an accessory board used to rearrange 16 I/O pins just by moving on-board jumpers in order to meet your specified needs. This board is ideal for configuring your prototype device I/O pins.
This bundle comes with the eINK click adapter and e-Paper display 1.54”. Which provides you an easy start of any project where the e-paper display is needed. The E-Ink technology is a reasonably new technology with a promising future, widely commercialized by the E-INK company. The content displayed on the E-INK (also known as E-Paper) display does not...
Reduce the TFT GUI development time considerably with mikroC, mikroBasic or mikroPascal for PIC32 and mikromedia for PIC32 development board. Buy this kit and save $80 USD.
Convert TSSOP-SSOP 28 pins (600 mil wide) package to DIP 28 pins.
mikroBasic PRO for AVR Buy now Download
EnOcean 2 Click is a compact add-on board that adds 2.4 gigahertz wireless communication to your application. This board features the TCM 515Z, a bidirectional transceiver gateway from EnOcean. It is based on the 2.4GHz IEEE 802.15.4 radio standard (Zigbee). It provides a transparent radio link between the EnOcean 2.4GHz device and an external host...
Plastic pH Electrode BNC connector is the high accuracy pH probe. This plastic probe can be used on all pH meters that have a BNC connection. It's protected by a plastic body reducing the possibility of damage to the probe to a minimum. This probe can read the pH liquid value without any problem. This Plastic pH Electrode BNC connector is compatible with...
WiFi 6 Click is a compact add-on board that offers ultra-low power wireless connectivity for any application. This board features the WF121-A, a self-contained WiFi module with an integrated antenna providing a fully integrated 2.4GHz 802.11b/g/n radio from Bluegiga. The 32-bit microcontroller under the hood makes an ideal product for embedded...
GainAMP 2 click is a 6-channel programmable gain amplifier, used to amplify signals on any of the 6 non-inverting input channels up to 32x, in eight discrete steps. The gain can be set via the SPI communication interface. The click has a high signal to noise ratio, a good bandwidth, and very low gain error. These features make it an ideal solution for...
Reduce the TFT GUI development time considerably with mikroC, mikroBasic or mikroPascal for ARM and mikromedia 5 for TIVA development board. Buy this kit and save USD 80$.
The Heart Rate 9 click is a Click board™ which features PIC16F1779 8-bit MCU and SFH 7060 heart rate and pulse oximetry monitoring sensor. This click has an algorithm for processing data from the sensor and it can send data for 3 different diodes (green, ir, red) who give out a diagram of the heartbeat and its frequency per minute. The data has shown that...
MCU Card is a standardized add-on board, which allows very simple installation and replacement of the microcontroller unit (MCU) on a development board equipped with the MCU Card socket. By introducing the new MCU Card standard, we have ensured the absolute compatibility between the development board and any of the supported MCUs, regardless of their pin...
Not a programming expert, but you have the talent to build a great user interface? Don't worry! Visual TFT will do the hard job for you. You just focus on the design of you TFT GUIs, and the software will handle the rest.
Hall current 3 click is a very accurate current measurement Click board™, which utilizes the Hall effect to provide a precise and reliable measurement of reasonably high current. Its most distinctive feature is a very low series resistance of only 0.7mΩ, making this device a nearly-perfect ammeter. The maximum current which can be measured by the MLX91210...
LDC Click is a compact add-on board that measures inductance change which a conductive target causes when it moves into the inductor's AC magnetic field. This board features the LDC1312-Q1, an I2C configurable two-channel, 12-bit inductance to digital converters (LDCs) for inductive sensing solutions from Texas Instruments. This Click board™ is...
6DOF IMU 22 Click is a compact add-on board for advanced motion tracking. This board features the ICM-42670-P, a high-performance 6-axis MEMS MotionTracking IMU from TDK InvenSense. The ICM-42670-P integrates a 3-axis gyroscope and accelerometer, offering exceptional precision in motion detection. It supports both I2C and SPI interfaces for communication,...
BOOST 2 click is a DC-DC step-up (boost) regulator that has a fixed 5V output, which can be obtained from any low voltage input - such as NiCd, NiMH or one cell Li-Po/Li-Ion batteries. This click features very high efficiency, low noise and anti-ringing voltage output and inrush current limiting with the internal soft-start, as well as true disconnect...
There are many kinds of touch sensors on the market, but every one of them has some unique features that make it stand out from the crowd. TouchKey 3 click is equipped with seven advanced capacitive sensors, based on the proprietary QTouch® technology. Besides quite a large number of QTouch® capacitive sensor channels, TouchKey 3 click also offers some...
4G LTE 2 Click - Voice (for North America) is a compact add-on board representing a secure-cloud multi-band solution offering universal connectivity and reliable performance. This board features the LARA-R6401, an ideal LTE Cat 1 solution for North America from u-blox, supporting all relevant LTE bands for use on AT&T, FirstNet, Verizon, or T-Mobile...
Build your own programmable timer relays using Ready for PIC, Keypad 4x4 board with EasyPull, RTC, Relay 4 and LCD 2x16 character display with adapter. Just load the demonstration project code and your device is ready to control 4 separate relays.
Waveform 4 Click is a compact add-on board that represents a high-performance signal generator. This board features the AD9106, a quad-channel, 12-bit, 180MSPS waveform generator, integrating on-chip static random access memory (SRAM) and direct digital synthesis (DDS) for complex waveform generation from Analog Devices. The DDS is up to a 180 MHz master...
Loading
Load more
Loading
