Filter Product By
Slide and select filter/s
Filtered by
IR Sense 3 Click is the infrared sensor Click board™, designed to be used for the short range IR sensing applications. Unlike other pyroelectric sensors, it is able to sense environmental heat changes up to 1m, even through the glass. IR Sense 3 click has human approach detection algoritam that makes perfectly suited for many human presence detection...
Oximeter click is a versatile photometric Click board™, perfectly suited for measuring the blood oxygen saturation. It employs ADPD105, a highly configurable photometric front end (AFE) device from Analog Devices. Almost all parameters of the IC are user-configurable, allowing this AFE IC to be used on a wide range of various photometric applications. It...
Tact Switch 6x6mm SMD (10pcs)
PWR Meter click is a power measurement Click board™, capable of measuring voltage and current through the load, connected to either AC or DC power source. PWR Meter click uses the MCP39F511A, a very sophisticated monitoring IC from Microchip, with 16-bit processing core. It is used to calculate all the measurement parameters, returning values of multiple...
I2C 1-Wire 2 Click is a compact add-on board bridging I2C master interfaces with 1-Wire slave devices, ideal for simplifying complex communication protocols. This board features the DS2485, an advanced 1-Wire master with memory from Analog Devices. It features adjustable internal timers for precise 1-Wire signal management, relieving the host processor of...
Battery Holder AAA Cylindrical, BH-411-4A, Lead wires
I2C Isolator 3 Click is a compact add-on board that offers completely isolated bidirectional communication. This board features the CPC5902, a dual optically isolated bidirectional logic-bus repeater from IXYS Integrated Circuits Division. The CPC5902 pass DC signals and don’t need to be clocked periodically to sustain the logic states. It supports I2C...
8-pin I2C Click is a compact add-on board that represents a breakout board that simplifies the connection of add-on boards with 8 pin Female Connector to mikroBUS™ socket. This board can be used as I2C Adapter with no main component on itself, with only an on-board connector for connection establishing. 8-pin I2C Click has no regional restrictions, no...
WiFi 2.4GHz/5.4GHz Active FPC Antenna (W3918B0100) is a small but powerful flat patch antenna that operates in two different frequency ranges, offering dual-frequency capabilities with central frequencies of 2.4GHz and 5.4GHz. Measuring just 35.2x8.5x0.15mm, this antenna is incredibly efficient and has a nominal impedance of 50Ω. Besides the 2W power...
Turbidity Click Bundle: This bundle gives you everything you need to take high-accuracy turbidity measurements. It allows users to combine Turbidity Sensor with Turbidity Click via an additional 3-wire Male to Male Cable - 15 cm to measure the relative clarity of any liquid. Turbidity Click Bundle gives you everything you need to measure the density of...
Clicker 4 Inverter Shield is an extension for Clicker 4 series boards from MIKROE. It is the perfect way to expand the functionalities of your Clicker 4 board to provide highly efficient control and drive solutions for brushless DC (BLDC) motors. NOTE: The Clicker 4 Inverter Shield 2 is compatible with the CLICKER 4 for TMPM4K or CLICKER 4 for TMPM3H...
Stepper 10 Click is a compact add-on board that controls one stepper motor with a PWM constant current drive. This board features the TB67S128FTG, a two-phase bipolar stepping motor driver from Toshiba Semiconductor. It is fabricated using a BiCD process with an output rating of 50V/5A and a built-in decoder that can supply the motor with a voltage of up...
H-Bridge 11 Click is a compact add-on board that allows a voltage to be applied across a load in either direction. This board features the MAX22200, an octal serial-controlled solenoid and motor driver from Analog Devices. The MAX22200 is SPI-configurable and rated for an operating voltage range from 4.5V to 36V. Each channel features a low impedance...
The E-Ink technology is a reasonably new technology with a promising future, widely commercialized by the E-INK company. The content displayed on the E-INK (also known as E-Paper) display does not degrade when exposed to direct sunlight, the display actually behaves like a real paper; it is more readable when there is more light hitting its surface....
Ribbon Cable 16-wire, Male/Female, 20 cm
Opto Encoder 3 Click is a linear incremental optical sensor/encoder click, which can be used for the movement or rotation encoding. The TCUT1800X01 sensor is equipped with one infrared LED with the wavelength of 950nm, and four phototransistors. Encoders of this type are widely used for many applications which involve precise detection of the position,...
Gyro 6 Click is a compact add-on board that contains a high-performance gyroscope. This board features the IAM-20380, a 3-axis, digital-output X-, Y-, and Z-axis angular rate sensor (gyroscope) from TDK InvenSense. It has a full-scale programmable range of ±250DPS, ±500DPS, ±1000DPS, and ±2000DPS with a factory-calibrated initial sensitivity and...
dsPIC-Ready4 Board dsPIC-Ready4 Board is the best solution for fast and simple development of 28-pin dsPIC30F microcontroller applications (dsPIC30F1010, dsPIC30F2020 etc.). It includes connectors for connecting the dsPICprog with mikroICD in-system stand-alone programmer. These connectors enable you to program microcontrollers without any other...
The BIGdsPIC6 is a development system for 64- and 80-pin dsPIC30F devices. Board is delivered with a MCU card that contains dsPIC30F6014A. The system features a USB 2.0 programmer with mikroICD and many peripheral modules such as Piezo speaker, EEPROM, FTDI, RTC, CAN, etc.
Magneto Click is a compact add-on board containing an accurate and reliable magnetic sensing device. This board features ams AG’s AS5048A, a 360° angle position sensor with a 14-bit high-resolution output. The AS5048A measures the absolute position of the magnet’s rotation angle, consisting of Hall sensors, analog-digital converter, and digital signal...
BLE 6 Click is a Bluetooth low energy system-on-chip application processor certified module, compliant with BT specifications v5.0 and BQE qualified. The featured BlueNRG-M2 module developed by STMicroelectronics supports multiple roles simultaneously and can act at the same time as Bluetooth master and slave device. The BlueNRG-M2 is based on the...
Reduce the TFT GUI development time considerably with mikroC, mikroBasic or mikroPascal for ARM and mikromedia 5 for TIVA development board. Buy this kit and save USD 80$.
The Heart Rate 9 click is a Click board™ which features PIC16F1779 8-bit MCU and SFH 7060 heart rate and pulse oximetry monitoring sensor. This click has an algorithm for processing data from the sensor and it can send data for 3 different diodes (green, ir, red) who give out a diagram of the heartbeat and its frequency per minute. The data has shown that...
MCU Card is a standardized add-on board, which allows very simple installation and replacement of the microcontroller unit (MCU) on a development board equipped with the MCU Card socket. By introducing the new MCU Card standard, we have ensured the absolute compatibility between the development board and any of the supported MCUs, regardless of their pin...
Loading
Load more
Loading
