Filter Product By
Slide and select filter/s
Filtered by
I2C to CAN Click is a compact add-on board that contains I2C to CAN-physical transceiver, which extends a single-master I2C bus through harsh or noisy environments. This board features the LT3960, a robust high-speed transceiver that extends a single-master I2C bus up to 400kbps using the CAN-physical layer from Analog Devices. One LT3960 from SCL and SDA...
LIN HALL Click is a compact add-on board representing a linear Hall-effect sensing solution. This board features the MLX90242, a linear Hall-effect sensor with built-in active error correction circuitry from Melexis Technologies. The MLX90242 outputs a signal proportional to the flux density of a magnetic field, further processed by the MCP3201, a 12-bit...
MP3 2 Click is an audio decoder expansion board with on-board microSD card slot, that enables you to create your personal audio playback system. It holds the KT403A,a SOC chip solution with intergraded MCU, hardware audio MP3/WAV decoder and DSP, from Shenzhen Qianle Microelectronics Technology Co. Ltd. All the mentioned integrated hardware components...
2x5W AMP Click is a compact add-on board that amplifies the audio input to the desired level. This board features the TDA7491LP, a 2x5 watt dual BTL class-D audio amplifier from STMicroelectronics. It can produce 5W + 5W continuous output power with high efficiency (90%) over a single power supply. Four selectable fixed gain settings are available to the...
8800 Retro Click is a compact add-on board that simplifies the control of multiple LEDs. This board features the AS1115, compact LED driver for 8x8 display screen programmed via a compatible 2-wire I2C interface from ASM-AG. The AS1115 includes an integrated BCD code-B/HEX decoder, multiplex scan circuitry, segment and display drivers, and 64-bit memory....
The Peltier Click is a Click board™ which utilizes the SPV1050, an ultralow power energy harvester and battery charger from STMicroelectronics. The Peltier click can charge lithium battery using thermoelectric energy harvesting device (TEG). A TEG converts heat directly into electrical energy according to the Seebeck effect. It can be used for a variety...
AlphaNum R Click is a compact add-on board representing an easy solution for adding numeric or hexadecimal displays to your application. This board features one red two digits 14-segment alphanumeric display with leading dots and two TLC5926, 16-bit constant-current LED-sink drivers from Texas Instruments. Each 14-segment display digit (also known as a...
PWM 2 click offers 48 independently controlled PWM channels, available over the onboard headers, perfectly suited for driving LEDs. Each channel has a 12-bit PWM register associated to it, with the addition of the 6-bit correction register, also known as the dot correction register. PWM 2 is able to detect both synchronization errors and open LED errors,...
Load Cell 6 Click is a compact add-on board representing a weigh scale solution. This board features the MAX11270, a high-performance 24-bit delta-sigma ADC that achieves excellent 130dB SNR while dissipating an ultra-low 10mW from Analog Devices. This SPI-configurable ADC sample rates up to 64ksps allow precision DC and AC measurements, with integral...
Force Click is a compact add-on board for measuring forces applied to a force-sensing resistor. This board features circuitry that allows the implementation of Force Sensing Resistors (FSR) from Interlink Electronics. The Force Click comes equipped with a screw terminal, with one single zone force sensing resistor included with the Click board™. The...
Environment 3 Click is a compact add-on board that contains a four-in-one environmental measurement solution. This board features BME688, a first gas sensor with Artificial Intelligence (AI), and integrated high-linearity/high-accuracy pressure, humidity, and temperature sensors from Bosch Sensortec. The BME688 can detect Volatile Organic Compounds...
LR IoT Click is a compact add-on board that contains a long-range transceiver. This board features Semtech Corporation’s LR1110, an ultra-low power platform integrating a LoRa® transceiver, multi-constellation GNSS, and passive WiFi AP MAC address scanner. Alongside its sub-GHz capabilities, the LR1110 also has a multi-band front-end capable of receiving...
This bundle comes with the eINK click adapter and e-Paper display 2.13”. Which provides you an easy start of any project where the e-paper display is needed. The E-Ink technology is a reasonably new technology with a promising future, widely commercialized by the E-INK company. The content displayed on the E-INK (also known as E-Paper) display does not...
Full-featured development board for TI’s Tiva™ C Series ARM® Cortex™-M4 microcontrollers. It contains many on-board modules necessary for developing a variety of applications, including multimedia, Ethernet, USB, CAN and other. Buy now The Ultimate Platform for TI’s Tiva™ C Series Four connectors for each port Amazing Connectivity EasyMx...
TFT Color Display with Touch Screen (7") and decorative cover glass (black bezel) is a color active matrix thin film transistor(TFT) liquid crystal display (LCD).
Brushless 3 click carries the DRV10983, a three-phase sensorless motor driver with integrated power MOSFETs. When an external power supply is applied, you can drive a brushless DC motor through the PWM pin, AN pin or I2C interface. It communicates with the target microcontroller over I2C interface, with the additional functionality provided by the...
The Ultrasonic 2 click is an ultrasonic range detection Click board™, capable of detecting both near-field and far-field objects. It is equipped with the PGA460, a highly-integrated system-on-chip (SoC), based on SONAR principle. This SoC consists of a low-noise analog front end (AFE) with a programmable time-varying gain stage, a digital signal processor...
A smart display solution, mikromedia HMI 7" Res has a 800x480px color display with a resistive touch panel on the front, and a powerful FT900Q 32-bit MCU with additional essential circuitry on the back - making it a standalone but cost-effective solution suitable for industrial applications.
Stepper 4 click is a very versatile bipolar stepping motor driver. It features TB67S269FTG IC, fabricated with the BiCD process, allowing the Click board™ to handle significant voltage and current levels up to 35V and 1.2A. This IC has the integrated translator section, used to simplify the control: using simple step control inputs from the host MCU, the...
ECG Click is a compact add-on board that measures the electrical activity of a beating heart through electrodes taped to the skin. This board features two MCP609s, a micropower CMOS operational amplifier from Microchip. The ECG Click is an ECG (or EKG) machine on a Click board™ and requires little setup, and the final measurement results can be displayed...
CC3100 Click is a compact add-on board that sends and receives data over Wi-Fi. This board features the CC3100, a Wi-Fi 802.11b/g SimpleLink™ series network processor from Texas Instruments. The TI’s SimpleLink™ is a platform with industry-leading features, including low power and robustness, and integrates security support with more than ten...
ECG 2 Click is a compact add-on board that measures the electrical activity of a beating heart through electrodes taped to the skin. This board features the ADS1194, a low-power, 8-channel, 16-bit analog front-end for biopotential measurements from Texas Instruments. The ECG 2 Click is an ECG (or EKG) machine on a Click board™ and requires little setup,...
EasyGSM/GPRS GM862 board is a breakout board for quad-band Telit GM862-QUAD GSM/GPRS module as well as for Telit GM862-GPS version
GSM/GNSS Click is a compact add-on board that combines GPS/GLONASS location tracking with GSM module capability for mobile communication. This board features the MC60, a quad-band full-featured GSM/GPRS module using the LCC castellation package from Quectel Wireless Solutions. An extensive set of internet protocols (TCP, UDP, PPP, FTP, HTTP, and SSL)...
Loading
Load more
Loading
