Filter Product By
Slide and select filter/s
Filtered by
PROTO Click is an accessory Click board™ used as a construction base for prototyping electronics in mikroBUS™ form factor. It features a 10x11 prototyping area and additional power pads providing an easy and elegant solution for adding the external connection capability to the Click board™, plugged on a mikroBUS™ socket. This Click board™ represents a...
MINI-32 Board MINI-32 is a small development board containing PIC32MX534F064H microcontroller. It operates on 3.3V power supply. On-board voltage regulator allows the board to be powered directly from USB cable. It is pin compatible with PIC16F887 and PIC18(L)F45K20 microcontrontrollers and it perfectly fits into standard DIP40 socket. Board is equiped...
WiFi Plus Click is a compact add-on board providing a low-power WiFi solution. This board features the MRF24WB0MA, a 2.4GHz, IEEE standard 802.11b/g/n compliant RF transceiver from Microchip. The MRF24WB0MA comes with an integrated antenna, with a range of up to 400m, and a place for a u.Fl connector. It is characterized by low power consumption and...
Graphic LCD 128X64 (White) is a framed graphical 128x64 px liquid crystal display (LCD) with a white backlight from Winstar Display Corporation. This new v2.0 module represents a clear STN-type LCD with a simple command interface, including the negative voltage circuitry on board. It is also characterized by a wide viewing angle, high contrast, easy MCU...
ETH Click is a compact add-on board that manages the communications between the system’s digital processing and an Ethernet interface. This board features the ENC28J60, a stand-alone Ethernet controller with an industry-standard Serial Peripheral Interface (SPI) from Microchip, designed to serve as an Ethernet network interface for any host MCU. The...
Weather Click is a compact add-on board that contains an integrated environmental sensor. This board features the BME280, a combined humidity and pressure sensor from Bosch Sensortec. Besides humidity and barometric pressure, the sensor can also measure the temperature. The altitude can be calculated using pressure value, but only if you know the hPa...
4-20mA T Click is a compact add-on board that serves as a transmitter in a 4-20mA current loop standard. This board features XTR116, a current loop transmitter from Texas Instruments. The XTR116 provides accurate, current scaling and output limit functions. To communicate with the target MCU over an SPI interface, this board use MCP4921, a DAC from...
RELAY Click is a compact add-on board with general-purpose relays that any host MCU can control. This board features two G6D1AASIDC5s, slim miniature relays from OMRON. The relays offer low power consumption in a small, lightweight package with PCB pin mounting, which in some cases allows socket mounting. It comes with a dimension of 17.5x6.5x12.5...
USB UART Click is a compact add-on board with a general-purpose USB to UART serial interface. This board features the FT232RL, a USB to serial UART bridge from FTDI. It offers a USB 2.0 to asynchronous serial data (UART) interface, allowing the microcontroller-based designs to communicate with the personal computer in a very simple way. It has integrated...
The SMD Black mikroBUS™ socket has a stronger design for easier interfacing with Click boards™. It features horizontal supports between 8-pin connectors and a 45° chamfered lower edge, ensuring a perfect fit and alignment. All pins are clearly labeled for secure placement. These sockets are packaged in plastic anti-static shipping tubes for safe...
This active GPS Antenna is 100% waterproof external antenna that can be used with our GPS and GNSS Click boards™. If you are looking for a perfect external antenna for your locator device, this is the right product for you.
The LCD display Module is built in a LSI controller, the controller has two 8-bit registers, an instruction register (IR) and a data register (DR). The IR stores instruction codes, such as display clear and cursor shift, and address information for display data RAM (DDRAM) and character generator (CGRAM). The IR can only be written from the MPU. The DR...
The MAX3232 Board is used for establishing RS232 communication with devices powered from 3.0V to 5.5V power supply.
Li-polymer battery is a compact and reliable power source with a 3.7V, 190mAh capacity, and approximately 4.5g weight. It features a unique 2C discharge current capability, providing a continuous 380mA, and comes with a standard SHR-02V-S connector, ensuring easy integration into various electronic projects. Perfect for devices requiring mobility and...
mikroBUS™ Shield is an extension board pin-compatible with all mikromedia boards, that features two mikroBUS™ host sockets which allow you to connect 1645 Click boards™. With this feature, you can provide desired additional functionality to your mikromedia and Clicker 2 boards.
GSM 2 Click is a compact add-on board representing a compact GSM cellular network communication solution. This board features the M95, a quad-band GSM/GPRS module from Quectel. This module features a full set of options for cellular networking and communication, such as network status indication, jamming detection, embedded internet protocols, including...
The 28BYJ-48 is a small stepper motor suitable for a large range of applications.
RFid Click is a compact add-on board that equips any embedded application with an RFID reader/writer. This board features the CR95HF, a multi-protocol contactless transceiver from STMicroelectronics. It provides RF communication on 13.56MHz and works with NFC/RFID tags and other ST reader products. Besides a selectable interface, it has up to a 528-byte...
ConnectEVE brings fast and visually stunning graphics even to 8-bit MCUs with little Flash and RAM. It’s state-of-the-art FT800 graphics controller integrates display, audio and touch onto a low cost, easy-to-use, single-chip solution.
GPS Click is a compact add-on board representing a compact solution for adding GPS functionality to your device. This board features the LEA-6S, a high-performance position engine module from u-blox. It is designed for low power consumption and low cost and can operate independently as a standalone GPS tracker. Data can also be acquired through a PC...
OLED C Click is a compact add-on board that contains a small 96x96 high-color OLED display. This board features the PSP27801, a full-color square OLED display from Shenzhen Boxing World Technology. The PSP27801 can display up to 65K/262K different colors and shades on a compact 1.12-inch size display. It provides a very good brightness-to-contrast ratio,...
Clicker 2 for STM32 All the inventions waiting to happen... Clicker 2 is a battery-powered click™ board two-seater based on the STM32F407VGT6, a 32-bit ARM® Cortex®-M4 microcontroller. Inventing and putting together fully-functional standalone gadgets is now just 1% perspiration, and 99% inspiration!
The HP ETH MCU card is shown on Figure 1. It contains STM32F407VGT6 microcontroller with on-chip peripherals and is a great choice for both beginners and professionals. After testing and building the final program, this card can also be taken out of the board socket and used in your final device.
Loading
Load more
Loading
