Filter Product By
Slide and select filter/s
Filtered by
DIGI POT 14 Click is a compact add-on board that contains a digitally controlled potentiometer. This board features the TPL0102, a dual-channel digital potentiometer with non-volatile memory from Texas Instruments. It is a 100K resistance end-to-end potentiometer with a 256-position resolution, where the wiper position can be stored in EEPROM. It can...
Gyro 9 Click is a compact add-on board that contains a high-performance gyroscope. This board features the A3G4250D, a MEMS motion sensor from STMicroelectronics. It is a low-power 3-axes digital output gyroscope that provides unprecedented stability at zero rate level and sensitivity over temperature and time and is equipped with an embedded temperature...
Light 3 Click is a compact add-on board for precise ambient light measurement in automotive applications. This board features the OPT4003-Q1, an automotive-grade digital ambient light sensor from Texas Instruments. This digital ambient light sensor excels in detecting both visible and near-infrared light with high accuracy, thanks to its dual-channel...
Inclinometer 3 Click is a compact add-on board for precise tilt and leveling measurement applications. This board features the SCL3400-D01, a two-axis inclinometer sensor from Murata, leveraging advanced capacitive 3D-MEMS technology. It features a high-performance mixed-signal ASIC with a flexible SPI digital interface housed in a robust 12-pin...
Light 4 Click is a compact add-on board designed for precise ambient light, UV index, and light flicker detection. This board features the TSL2585 sensor from ams OSRAM, which incorporates photopic, infrared (IR), and ultraviolet (UV) photodiodes to enable multiple concurrent sensing functions. The TSL2585 continuously monitors ambient light, calculates...
Epoxy Coated NTC Thermistor Sensor, the GA10K3A1IA from TE Connectivity, is known for its accuracy and durability and is designed for precise thermal monitoring in various applications. It features a resistance of 10kΩ at 25°C, operates within a temperature range of -40°C to 125°C (-40°F to 257°F), and has a tolerance β-value of ±0.5%, ensuring reliable...
BT122-A Click is a compact add-on board designed for Bluetooth connectivity in low-energy and Classic communication applications. This board features the BT122-A, a dual-mode Bluetooth BR/EDR and BLE v4.2 module from Silicon Labs, with robust performance and flexibility. The BT122-A integrates a high-power Bluetooth radio with +11dBm transmit power and...
Power Step 2 Click is a compact add-on board for precise motion control applications. It is based on the powerSTEP01, a powerful 1/128 microstepping controller from STMicroelectronics, that integrates eight N-channel MOSFETs with ultra-low RDS(on). This board operates at voltages up to 85V, delivering up to 10A RMS output current while supporting both...
Low Power Thermal Print Head - 4.2V (M23-SX) is designed for high-speed, high-resolution thermal printing in compact and portable devices. This print head ensures reliable performance with minimal power consumption. It operates within a logic voltage range of 3.0–4.5V and a heating voltage range of 3.3–5.5V, achieving a resolution of 8 dots/mm with 384...
SPI to I2C Click is a compact add-on board that enables communication between SPI and I2C interfaces, allowing a host microcontroller to control multiple I2C peripherals even without native I2C support. It is based on the SC18IS604, an SPI-to-I2C bridge from NXP, which manages all I2C-bus operations including protocol handling, arbitration, and timing to...
EasyMx PRO v7 for Tiva C Series Empty MCU card for 64-pin TQFP TM4C123 series. Card is not populated with components. Pin distance 100mil.
MCU Card is a standardized add-on board, which allows very simple installation and replacement of the microcontroller unit (MCU) on a development board equipped with the MCU Card socket. By introducing the new MCU Card standard, we have ensured the absolute compatibility between the development board and any of the supported MCUs, regardless of their pin...
BT Click is a compact add-on board targeted for applications that require both Bluetooth Smart and Classic connectivity. This board features the BT121, a dual-mode Bluetooth Smart Ready module solution that gives unparalleled flexibility to integrate both Bluetooth Smart and Bluetooth Basic Rate/Enhanced Data Rate (BR/EDR) wireless technologies from...
Accel 17 Click is a compact add-on board that contains an acceleration sensor. This board features the MXC62320MP, a low-power digital output dual-axis accelerometer fabricated on a standard, submicron CMOS process from MEMSIC. The MXC62320MP can measure both dynamic acceleration (e.g., vibration) and static acceleration (e.g., gravity), with full-scale...
USB Type A Socket Right Angle (205B-DAN0-R) is a universal 2.0 Type A USB connector from Attend, primarily used on host controllers in computers and hubs. Type A is the "original" most recognizable and commonly used USB connector featuring hot-swapping and Plug-n-Play, which changes the user behavior of all pluggable devices. Based on its compact design...
One of the most used high-level build systems in the world - CMake is implemented in our all-in-one IDE NECTO Studio. When you hear CMake, you might think, how will I know what to do. We have simplified it and added everything you will ever need when working on any project. Just like this T-shirt says "It's like a piece of cake, making a project in...
GNSS 13 Click is a compact add-on board that provides positioning, navigation, and timing services. This board features the LG77LICMD, a global-region standard-precision GNSS module from Quectel Wireless Solutions. This module utilizes concurrent reception of up to three GNSS systems - GPS, GLONASS (or BeiDou), and Galileo, maximizing position...
H Bridge 12 Click is a compact add-on board with an H-Bridge gate driver, also known as a full-bridge pre-driver. This board features the DRV8823, a 4-bridge serial interface motor driver from Texas Instruments. Each of the four H-Bridge driver blocks uses N-channel power MOSFETs configured as H-Bridge to drive the motor windings. All four blocks provide...
eFuse 7 Click is a compact add-on board with a power path protection solution that limits circuit currents and voltages to safe levels during fault conditions. This board features the LS12052BD33, an eFuse with over-voltage protection and blocking FET control from Littelfuse. This industrial eFuse has a wide input voltage from 2.7V up to 18V, external...
LIN Hall 2 Click is a compact add-on board representing a linear Hall-effect sensing solution. This board features the TMAG5253, a low-power bipolar linear Hall-effect sensor from Texas Instruments. The sensor responds proportionally to the magnetic flux density with a magnetic sensitivity range of ±80mT and outputs proportional analog voltage. The sensor...
Grid-EYE 2 Click is a compact add-on board designed for thermal imaging and motion detection applications. This board features the AMG883543, an infrared array sensor from Panasonic with a 90° viewing angle and an 8x8 pixel matrix that measures temperatures from 0°C to 80°C with a resolution of 0.25°C. The sensor can detect objects up to 5 meters away and...
Plastic enclosure for Clicker 4 (the C7016014 from OKW) is designed to protect and securely house Clicker 4 products from MIKROE. This two-piece enclosure features a durable ABS/PC construction, offering high resistance to dust, water, and impacts, meeting IP 66, IP 67, and IK 07 protection standards. It includes a transparent top for the visibility of...
Loading
Load more
Loading
