20%
OFF
MIKROE-2734
28 g
Status:
7-SEG RGB click carries a full color single 7 segment digit display. The click is designed to run on either 3.3V or 5V power supply. It communicates with the target microcontroller over the CS, and PWM pin on the mikroBUS™ line.
This product is no longer in stock
Availability date:
7-SEG RGB click carries a full-color single 7 segment digit display. The click is designed to run on either 3.3V or 5V power supply. It communicates with the target microcontroller over the CS, and PWM pin on the mikroBUS™ line.
The click can be connected in a chain, in order to display a larger number of characters. Unlike with conventional 7 segment displays, you will be able to use multiple colors on the display.
Each segment has R, G, B LEDs that can be adjusted in 255 steps and therefore 16,581,375 color combinations are available for each segment of the digit on the display.
Also, the ability to control the brightness of all the LED's is driven at 255 steps. It should be noted that the brightness values above 80 should rarely be used.
Type
7-segment,LED Segment
Applications
Displaying digits and letters on a seven segment in full color
On-board modules
RGBdigit full color single 7 Segment digit display
Key Features
Multi-colored display
Interface
PWM
Feature
No ClickID
Compatibility
mikroBUS™
Click board size
L (57.15 x 25.4 mm)
Input Voltage
3.3V or 5V
This table shows how the pinout on 7-SEG RGB click corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns).
Designator | Name | Default Position | Default Option | Description |
---|---|---|---|---|
JP1 | Logic level | Left | 3.3V | Data in level Voltage Selection 3V3/5V, left position 3V3, right position 5V |
Code examples for 7-SEG RGB click, written for MikroElektronika hardware and compilers are available on Libstock.
The following code snippet writes the numbers 1, 2 and 3 in green, red and blue colors on 7-SEG RBG click.
01 #define ONE 0x06 02 #define TWO 0x5B 03 #define THREE 0x4F 04 sbit CS_BIT at GPIOD_ODR.B13; 05 sbit RGB_CONTROL_BIT at GPIOA_ODR.B0; 06 void systemInit() 07 { 08 GPIO_Digital_Output( &GPIOD_BASE, _GPIO_PINMASK_13 ); 09 GPIO_Digital_Output( &GPIOA_BASE, _GPIO_PINMASK_0 ); 10 } 11 void RGB_7_SEG_Init() 12 { 13 RGB_CONTROL_BIT = 0; 14 CS_BIT = 0; 15 } 16 void RGB_7_SEG_Task() 17 { 18 setSevenSegment(ONE,40,0,0); 19 Delay_ms(1000); 20 setSevenSegment(TWO,0,40,0); 21 Delay_ms(1000); 22 setSevenSegment(THREE,0,0,40); 23 Delay_ms(1000); 24 } 25 void main() 26 { 27 systemInit(); 28 RGB_7_SEG_Init(); 29 while( 1 ) 30 { 31 RGB_7_SEG_Task(); 32 } 33 }
NOTE: Please be advised that any peripheral devices or accessories shown connected to the Click board™ are not included in the package. Check their availability in our shop or in the YMAN section below.