Mikrobasic pro

Message

garbe · #1 Post by **garbe** » 14 Apr 2009 18:47

I have a registrer key for Mbasic 7, can i buy a register key for Mbasic pro 2009 ? how cost ?
thanks

yo2lio · #2 Post by **yo2lio** » 14 Apr 2009 21:13

garbe wrote:I have a registrer key for Mbasic 7, can i buy a register key for Mbasic pro 2009 ? how cost ?

You can buy, but if you are already registered in Mikroe database (you have license for MikroBasic), the licence for MikroBasic PRO it's FREE.

Just request the new license.

garbe · #3 Post by **garbe** » 15 Apr 2009 10:51

I send mail to Lextronic to obtain a key for mikrobasic pro
(i buy mikrobasic 6 in france : lextronic )
Mr braun from lextronic say that i can use the same registerkey of mikrobasic 7 for mikrobasic pro !

i try many times (after i have cleaning all mikrobasic 7 ....)
but when i intall mikrobasic pro, no problem
but for register i have this message
"installation folder for mikrobasic was not found, please reinstall ...
Help
i buy mikrobasic in lextronic in france

the invoice number is 20075053V (date 12 september 2007)
thanks

yo2lio · #4 Post by **yo2lio** » 15 Apr 2009 11:19

garbe wrote: the invoice number is 20075053V (date 12 september 2007)

No, make new registration request directly to MikroElektronika, from Help > How to Register and put invoice number and date at additional information.

cirederf · #5 Post by **cirederf** » 15 Apr 2009 11:47

Hi

garbe wrote:I send mail to Lextronic to obtain a key for mikrobasic pro
(i buy mikrobasic 6 in france : lextronic )
Mr braun from lextronic say that i can use the same registerkey of mikrobasic 7 for mikrobasic pro !

i try many times (after i have cleaning all mikrobasic 7 ....)
but when i intall mikrobasic pro, no problem
but for register i have this message
"installation folder for mikrobasic was not found, please reinstall ...
Help
i buy mikrobasic in lextronic in france

the invoice number is 20075053V (date 12 september 2007)
thanks
:wink:

I have the same problem

garbe · #6 Post by **garbe** » 15 Apr 2009 12:07

all is OK
i have send this message to lextronic :

" Mr garbe
je vous donne le message qui confirme qu'il faut demander
une nouvelle cle et qu'elle est gratuite

In order to make your new mikroBasic PRO for PIC compiler fully functional, bear in mind that you will need to send a request for a new registration key, because the old one is not compatible with the new version of compiler.
The procedure for obtaining a new registration key is the same as it was with the old mikroBasic.
The upgrade to the new mikroBasic PRO for PIC compiler is free of charge; once you have paid for the registration key, you get lifetime license
"
with my invoice and date
i obtain the key !
thanks to everyone for help

stevenindon · #7 Post by **stevenindon** » 15 Apr 2009 13:19

yo2lio,

I have requested my license through my dealer... and he made the request for me. Now i am a happy user of mikrobasic PRO.

How can i know/obtain my invoice number?.... as in future i am afraid just in case that i couldnt locate my dealer, at least i can request directly from mikroe.

I did enquire the invoice number from my dealer, but he insisted that i do the request through him.

I was forwarded this email by my dealer for the location of my download :

Please download the registration program from the address:
http://www.mikroe.com/licenses/T05CXXXX ... ic_Reg.exe

so in this case is T05CXXXXXXXX5 is my invoice number??

Please help.

Thanks.

stevenindon · #8 Post by **stevenindon** » 16 Apr 2009 10:36

yo2lio,
How can i get my invoice number from mikroe??

Thanks

novak · #9 Post by **novak** » 16 Apr 2009 11:05

Hello,

I must tell you that you are in worry without a specific reason.

If you purchase MikroElektronika compiler from one of the MikroElektronika distributors/dealers then you have to obtain the license key over distributor, too.
That is the procedure and for all this years we did not have any serious problems.

One thing that you should always have in mind is a fact that MikroElektronika is serious company which take care about customers.
In any situation, we will do everything what is in our power to protect our customers.

So, please do not worry but enjoy in programming.

stevenindon wrote:yo2lio,

I have requested my license through my dealer... and he made the request for me. Now i am a happy user of mikrobasic PRO.

How can i know/obtain my invoice number?.... as in future i am afraid just in case that i couldnt locate my dealer, at least i can request directly from mikroe.

I did enquire the invoice number from my dealer, but he insisted that i do the request through him.

I was forwarded this email by my dealer for the location of my download :

Please download the registration program from the address:
http://www.mikroe.com/licenses/T05CXXXX ... ic_Reg.exe

so in this case is T05CXXXXXXXX5 is my invoice number??

Please help.

Thanks.

Colin · #10 Post by **Colin** » 16 Apr 2009 11:11

Its not that difficult to get the activation key..
Click on how to register from the help menu.
Fill in the 4 required fields.
*Full name
*email address
*re-enter email address
*Distributor.
Click the send button.
Then wait for a reply. I got mine in 4 hours.

garbe · #11 Post by **garbe** » 16 Apr 2009 12:17

Yes MikroElektronika is very serious company which take care about customers.
Witch compagny offer update for free ?
for few months, i buy on the website, fast and sérious !

Thanks to mikroelectronika team

norbie · #12 Post by **norbie** » 17 Apr 2009 08:33

Pssss,
don't give em any ideas.

Just kidding, Mikroe is in fact very generous regarding their products.
I can't complain at all.
It is rare to find a company with this Philosophy, otherwise only found within the LINUX community.

Thanks Mikroe, we really appreciate your hard work.

Mikrobasic pro

Mikrobasic pro

Re: Mikrobasic pro

Yes but ...

Re: Yes but ...

Re: Yes but ...

problem is solved

Very sérious

Copyright© 2020 MikroElektronika d.o.o.