Additional library for MikroPascal PRO 2009

yo2lio · **Posted:** 12 May 2009 10:45

Hello all,

Additional library for MikroPascal PRO 2009 are available here :
http://www.microelemente.ro/MikroPascal ... y_V1_3.zip

This setup will install the following files in \Uses\P18 folder :

all_digital.mpas
Bit_Lib.mcl
Bootloader_lib_V7_ZABBIX_64K.mcl
Bootloader_lib_V7_ZABBIX_96K.mcl
Bootloader_lib_V7_ZABBIX_128K.mcl
CAN_lib.mcl
definitions_enc.mcl
Flash_Mem_Library.mcl
Frecv_lib_P18.mcl
lib1_18f97j60_v3_5.mcl
lib1_enc28j60_v3_5.mcl
lib2_18F97J60_V3_5.mcl
lib2_enc28j60_V3_5.mcl
lib1_18f97j60_v3_4.mcl
lib1_enc28j60_v3_4.mcl
lib2_18F97J60_V3_4.mcl
lib2_enc28j60_V3_4.mcl
Lib_Delays_LIO.mpas
onewire_base.mcl
pic_additional_string_library.mcl
SDMMC_SPI1.mcl
SDMMC_SPI2.mcl
sensirion_lib_P18.mcl
snmp_library_user.mcl
snmp_library_user_32.mcl
Termal_Library_My.mcl
PPS_Library.mcl

MP_PRO_Library_V1_2_Uninstall.exe

Examples and documentations for this libraries are available here :
http://www.microelemente.ro/MikroPascal ... xample.zip

Enjoy!

Dany · **Posted:** 12 May 2009 11:26

Thanks Florin!

FRM · **Posted:** 12 May 2009 13:31

You're a star! - & a very generous one at that. Thank you! :wink:

chimimic · **Posted:** 13 May 2009 08:26

Thanks, yo2lio :D

IgorS · **Posted:** 13 May 2009 14:38

Thanks! We wait examples!

yo2lio · **Posted:** 13 May 2009 17:04

IgorS wrote:

Thanks! We wait examples!

Available now, check first post.

IgorS · **Posted:** 13 May 2009 20:58

yo2lio wrote:

Available now, check first post.

Ok! Thanks!

yo2lio · **Posted:** 19 May 2009 11:06

Library updated. See first post...

Added support for Ethernet Library V3_4.
Added support for Peripheral Pin Select, thanks to JPC.

The Ethernet Library V3_4 is V3_5 without TCP/IP stack.
Include also DHCP, DNS and firewall policy. Be careful at opened ports... See V3_5 example.

Before installations you must uninstall old version with MP_PRO_Library_V1_1_Uninstall.exe from /Uses/P18 folder.

Dany · **Posted:** 19 May 2009 15:05

Thanks Florin!

IgorS · **Posted:** 27 May 2009 07:19

Hello, yo2lio!
Please, write an example how to use functions OWSearch _, OWFirst _, OWNext_.

yo2lio · **Posted:** 27 May 2009 12:17

Hello,

I don't have any example for this, I implemented this functions only ...

My intention was to write discover routine for DSxxxx sensors.
Unfortunately my time is limited.

Donald Shimoda · **Posted:** 29 May 2009 20:39

Start using, but missed the standard longtostr with space in pic_additional_string_library.

I bet is not very hard to add functions like

LongInt2StrWithZeros

but

LongInt2StrWithChars allowing a customizable char at start of string?

TIA

yo2lio · **Posted:** 02 Jul 2009 10:48

Library updated. See first post...

All libraries are compiled with MP PRO 2.50

Before installation, you must uninstall old version with MP_PRO_Library_V1_2_Uninstall.exe from /Uses/P18 folder.

Dany · **Posted:** 02 Jul 2009 16:17

yo2lio wrote:

Library updated. See first post...

All libraries are compiled with MP PRO 2.50

Before installation, you must uninstall old version with MP_PRO_Library_V1_2_Uninstall.exe from /Uses/P18 folder.

Thanks Florin!

yo2lio · **Posted:** 02 Jul 2009 20:16

I added procedure Set_TCP_TimeOut_Interval(int_ : word); in Ethernet V3_5 library. Default value is 60 sec.

Set timeout interval for all TCP sockets.
This routine can be called only after Eth_Init routine.

Code: Select all

Set_TCP_TimeOut_Interval(300); // keep connection opened for 300 seconds

mikroElektronika

Additional library for MikroPascal PRO 2009

Who is online