Error in help file

Beta Testing discussion on mikroBasic.
Post Reply
Author
Message
oliverb
Posts: 570
Joined: 24 May 2007 15:09

Error in help file

#1 Post by oliverb » 12 Jan 2009 22:04

On the page describing the "SPI LCD8 (8-bit interface) Library":

There appears to be an error in the schematic, the RS and E lines are transposed. I've just had to verify it with a logic probe, I just stripboarded it and the version from the helpfile just wouldn't fly.

It's possible I got it backwards in the first place and I've fixed my own mistakeinstead, but unlikely. In the helpfile pin GPA2 is labelled E but the pin idles high (RS), GPA4 is labeled RS but idles low (E).
Top
User avatar
filip
mikroElektronika team
Posts: 11874
Joined: 25 Jan 2008 09:56

#2 Post by filip » 16 Jan 2009 14:55

Hi oliverb,

Thank you for reporting this bug. By some accident, these pins were labeled in a wrong way. It will be corrected it the coming releases of the compiler.

I'm sorry for the inconvenience caused by this error.

Regards,
Filip.
Top
Post Reply

Return to “mikroBasic Beta Testing”