FREQUENCY

Please check the frequently asked questions before posting to the forum.
Post Reply
Author
Message
iverson nair
Posts: 4
Joined: 20 May 2013 15:00
Location: jhb

FREQUENCY

#1 Post by iverson nair » 30 Oct 2013 07:36

HI
CAN ANYONE ASSIST ME WITH A GOOD EXAMPLE ON HOW TO CONTROL HZ PULSES. I HAVE A PROJECT TO DO AND CAN NOT SEEM TO FIND ANY GOOD STARTING POINT. I NEED TO READ THE HZ SIGNAL COMING IN, THEN SET A POINT WHERE IT MUST TURN A LED ON. FOR EXAMPLE IF THE INPUT HZ IS = 50 HZ AND CLIMPS UP TO 150HZ WHEN IT SEES 150 HZ THE LED SHOULD TURN ON
CAN ANY ONE PLEASE ASSIST

REGARDS
IVAN
Top
janni
Posts: 5373
Joined: 18 Feb 2006 13:17
Contact:
Contact janni

Re: FREQUENCY

#2 Post by janni » 30 Oct 2013 17:24

Hi Ivan,

You'd have more responses if you picked right forums for your posts. Do not choose WishLists, which are for posting about wanted compiler features, or FAQs, which are for responses to commonly asked questions, or old compiler versions forums which are not popular for obvious reasons. And please do not use all capital letters in your posts - it's harder to read and looks like shout to the readers.

Best pick the General forum belonging to the programming language of your choice, or User Projects, if your problem is not language-specific.

As for your problem, check this note.
Top
Post Reply

Return to “mikroPascal FAQ”