EasyPICv8: WiFi Not Connecting
EasyPICv8: WiFi Not Connecting
CodeGrip will not find EasyPICv8 via WiFi, EasyPIC shows POWER, NET_LINK, Active and DATA. Configured as Station Mode.
Re: EasyPICv8: WiFi Not Connecting
** SOLVED **
CodeGrip update fixed the problem.
CodeGrip update fixed the problem.
Re: EasyPICv8: WiFi Not Connecting
That's nice that the CodeGrip (firmware) fixes the issue for you. How did you do that (firmware) upgrade?
I still have difficulties doing this step.
I still have difficulties doing this step.
- filip.grujcic
- Posts: 822
- Joined: 14 May 2018 08:34
Re: EasyPICv8: WiFi Not Connecting
Hello,
In order to perform the firmware upgrade, follow these steps:
1) Connect your device
2) Open CODEGRIP Suite
3) Go to HELP > Updates > CODEGRIP
4) Click on the Scan Devices button
5) You have 5 seconds to toggle the power on your device (if you are using a development board simply press the power button twice, if you are using external CODEGRIP programmer, unplug and plug the USB cable)
6) After the 5 second countdown ends the device should appear in the list, simply click on the Update Firmware button and follow the steps until the end
Regards,
In order to perform the firmware upgrade, follow these steps:
1) Connect your device
2) Open CODEGRIP Suite
3) Go to HELP > Updates > CODEGRIP
4) Click on the Scan Devices button
5) You have 5 seconds to toggle the power on your device (if you are using a development board simply press the power button twice, if you are using external CODEGRIP programmer, unplug and plug the USB cable)
6) After the 5 second countdown ends the device should appear in the list, simply click on the Update Firmware button and follow the steps until the end
Regards,
Filip Grujcic
Re: EasyPICv8: WiFi Not Connecting
Works fine. Many thanks.