Beaglebone mikroBus Cape: EEPROM

Post your reviews about the boards you have got.
Post Reply
Author
Message
frank_for_click
Posts: 2
Joined: 26 May 2020 08:46

Beaglebone mikroBus Cape: EEPROM

#1 Post by frank_for_click » 26 May 2020 09:25

Hello,

I just received the mikroBus Cape for Beaglebone Black. I recognised that the I²C EEPROM on this board is a Microchip 24AA01I.
Looking into the datasheet, it says that this device ignores the address selection input pins.

I double checked this information by running an I²C scanner. The EEPROM will be showing at addresses 0x50 - 0x57. This confirms
the information from the datasheet, but is different to the information in the manual for the mikroBUS cape.

Please correct this information or choose a different EEPROM.
with best regards
Frank
Top
User avatar
jovana.medakovic
mikroElektronika team
Posts: 986
Joined: 18 Dec 2018 10:36

Re: Beaglebone mikroBus Cape: EEPROM

#2 Post by jovana.medakovic » 11 Jun 2020 11:47

Hello,

Yes, you are right.
I forwarded this to our hardware and web team.
Thank you for pointing this out.

Kind regards,
Jovana
Top
Post Reply

Return to “Review”