Yes, the same bootloader can be used on both of these boards.I would like to use a USB port in my device for both communicating with a PC application and for programming using the bootloader. Can the PIC32MX7 bootloader be used with the Fusion v7 board? It appears that the wiring is the same for the USB Device port, except for the USB-ID pin. I would like to test all my functions on one platform, emulating the final project where there will only be one USB port.
I would need bi-directional comms, like ... USB port?
You could develop the UART bootloader for this MCU, but since it has a lots of Flash memory it would be slow if some complex project/HEX file is uploaded.
Regards,
Filip.