Hello together,
I know that you don`t provide Software Support for Arduino but since I can`t open your mpkg files for some reason, is there a Chance, that you can send me the Heart Rate 3 and 8 Source Codes, so I can build my own libary?
And if possible some examples ? (Or explain me how to unpack the mpkg files on windows ?)
P.S
I already got the Source Code for the Heart Rate 5 from the other topic , thanks for that.
Heart Rate 3 and 8 Source Code needed
- filip.grujcic
- Posts: 822
- Joined: 14 May 2018 08:34
Re: Heart Rate 3 and 8 Source Code needed
Hi,
You can find the source code for Heartrate 3 on our Github:
https://github.com/MikroElektronika
I will have our developers upload the source for the other 2 Click boards you've asked for in the other thread.
Kind regards,
You can find the source code for Heartrate 3 on our Github:
https://github.com/MikroElektronika
I will have our developers upload the source for the other 2 Click boards you've asked for in the other thread.
Kind regards,
Filip Grujcic
Re: Heart Rate 3 and 8 Source Code needed
Okay
I am waiting for the other Codes and aswell the Heart-Rate 8 please.
I am waiting for the other Codes and aswell the Heart-Rate 8 please.
Re: Heart Rate 3 and 8 Source Code needed
And if possible for the Mikroe 3566 (BME388).
If you want I can send you the Arduino (C)-Libaries after aswell
If you want I can send you the Arduino (C)-Libaries after aswell
- filip.grujcic
- Posts: 822
- Joined: 14 May 2018 08:34
Re: Heart Rate 3 and 8 Source Code needed
Hello,
Attached is the source for Pressure 5.
Regards,
Attached is the source for Pressure 5.
Regards,
- Attachments
-
- press5.zip
- (302.58 KiB) Downloaded 80 times
Filip Grujcic
Re: Heart Rate 3 and 8 Source Code needed
Hey , thanks so far.
Is there a chance to get the C-Code/Sample Code for the Heart Rate 5 aswell ? Either here or via E-Mail
And I just read:
SW1 MODE SEL
Photo-diode type selection (anode): left position HRM (P), right position SpO2 (O)
Does this mean, that the Heart Rate 5 can only measure HRM OR SpO2 ? Or can it measure both at the same time ?
If the HeartRate 5 is not able to measure both at the same time, can you suggest me another sensor for the wrist ?
Kind regards
Jamez
Is there a chance to get the C-Code/Sample Code for the Heart Rate 5 aswell ? Either here or via E-Mail
And I just read:
SW1 MODE SEL
Photo-diode type selection (anode): left position HRM (P), right position SpO2 (O)
Does this mean, that the Heart Rate 5 can only measure HRM OR SpO2 ? Or can it measure both at the same time ?
If the HeartRate 5 is not able to measure both at the same time, can you suggest me another sensor for the wrist ?
Kind regards
Jamez
- jovana.medakovic
- mikroElektronika team
- Posts: 986
- Joined: 18 Dec 2018 10:36
Re: Heart Rate 3 and 8 Source Code needed
Hello Jamez,
Unfortunately, you cannot measure HRM and SpO2 at the same time using Heart rate 5 click board.
However, you can read about Heart rate click board:
https://www.mikroe.com/heart-rate-click
Maybe it can be interesting for you.
In the attachment, you can find the source code of this click board.
Kind regards,
Jovana
Unfortunately, you cannot measure HRM and SpO2 at the same time using Heart rate 5 click board.
However, you can read about Heart rate click board:
https://www.mikroe.com/heart-rate-click
Maybe it can be interesting for you.
In the attachment, you can find the source code of this click board.
Kind regards,
Jovana
- Attachments
-
- library.zip
- (21.68 KiB) Downloaded 77 times
Re: Heart Rate 3 and 8 Source Code needed
1. Is it a problem of the sensor (sfh 7072) itself ? Or is the problem based on the pcb soldering ?
2. I guess the Heart-Rate-Click is only for the index-finger but not for the wrist ? (Since green led`s would be better) Or am I wrong ?
Thanks for the C-Files, best Support keep going like this
Kind regards
Jamez
2. I guess the Heart-Rate-Click is only for the index-finger but not for the wrist ? (Since green led`s would be better) Or am I wrong ?
Thanks for the C-Files, best Support keep going like this
Kind regards
Jamez
Re: Heart Rate 3 and 8 Source Code needed
Can you tell me how to wire the Heart Rate 5 Click to an Microcontroller ?
Do I just need 3,3V/5V, GND, SDA and SCL if I work with I2C ? Or do I need to put another pin to GND or VDD ?
Do I just need 3,3V/5V, GND, SDA and SCL if I work with I2C ? Or do I need to put another pin to GND or VDD ?