Hi,
I have just received a new EasyMX Pro board for the STM32 and I'm trying to get the programmer working however I'm seeing an error "USB Communication Error" when I try to detect the MCU. It has worked once prior, and a few times appeared to work but the original program was still in there. I'd like to program using a hex file from TrueStudio however even when used with MikroC I still get an error.
The settings are:
Hardware: STLink
Connection: Normal
SWD
Can someone please suggest a fix to this.
Cheers,
Paul
mikroProg v1.6 Communication Error
-
stefan.filipovic
- mikroElektronika team
- Posts: 1135
- Joined: 18 Dec 2018 10:30
Re: mikroProg v1.6 Communication Error
Hi Paul,
What happens when you use JTAG instead of SWD?
Have you installed mikroProg Suite and drivers as administrator?
Which operating system you are using?
Kind regards,
What happens when you use JTAG instead of SWD?
Have you installed mikroProg Suite and drivers as administrator?
Which operating system you are using?
Kind regards,
Stefan Filipović
Re: mikroProg v1.6 Communication Error
Hi Stefan
Yes I needed to reinstall the drivers, I then started intermittently getting device not recognised errors. Last night I had it working fine then when checking this morning a got the device not recognised until I removed and replaced the USB cable.
I don’t have these issues with the easy pic 7 board.
I’m using Windows 10 btw
Cheers
Paul
Yes I needed to reinstall the drivers, I then started intermittently getting device not recognised errors. Last night I had it working fine then when checking this morning a got the device not recognised until I removed and replaced the USB cable.
I don’t have these issues with the easy pic 7 board.
I’m using Windows 10 btw
Cheers
Paul
-
stefan.filipovic
- mikroElektronika team
- Posts: 1135
- Joined: 18 Dec 2018 10:30
Re: mikroProg v1.6 Communication Error
Hi Paul,
I'm glad that you have managed to fix this.
Yes, sometimes the problem could be even in the USB cable.
For Windows 10 it's recommended to disable driver signatures.
Please read this article:
https://helpdesk.mikroe.com/article/865 ... windows-10
Kind regards,
I'm glad that you have managed to fix this.
Yes, sometimes the problem could be even in the USB cable.
For Windows 10 it's recommended to disable driver signatures.
Please read this article:
https://helpdesk.mikroe.com/article/865 ... windows-10
Kind regards,
Stefan Filipović
Re: mikroProg v1.6 Communication Error
Thanks Stefan
I’ll check that tonight
Cheers
Paul
I’ll check that tonight
Cheers
Paul
-
stefan.filipovic
- mikroElektronika team
- Posts: 1135
- Joined: 18 Dec 2018 10:30
Re: mikroProg v1.6 Communication Error
Hi Paul,
You're welcome.
Please let us know whether this has been of help or not.
Kind regards,
You're welcome.
Please let us know whether this has been of help or not.
Kind regards,
Stefan Filipović
Re: mikroProg v1.6 Communication Error
Unfortunately we now have a guest staying in my study for the weekend, so access is limited 
However, it did seem to be working, so I'll see how it goes in a few days. If I'm still having issues, I'll try your suggestion and post the resolution up either way.
Cheers, Paul
However, it did seem to be working, so I'll see how it goes in a few days. If I'm still having issues, I'll try your suggestion and post the resolution up either way.
Cheers, Paul
-
stefan.filipovic
- mikroElektronika team
- Posts: 1135
- Joined: 18 Dec 2018 10:30
Re: mikroProg v1.6 Communication Error
Hi Paul,
I'm glad that it works.
If there's anything else I can assist you with, or if this problem appears again, don't hesitate to contact me.
Kind regards,
I'm glad that it works.
If there's anything else I can assist you with, or if this problem appears again, don't hesitate to contact me.
Kind regards,
Stefan Filipović
