Device Unknown

General discussion on mikroProg™ programmer and debugger and mikroProg Suite software as well.
Post Reply
Author
Message
pedrodurek
Posts: 4
Joined: 26 Aug 2014 03:56

Device Unknown

#1 Post by pedrodurek » 26 Aug 2014 04:08

Hi everyone... Im having this problem and i don't know how to fix it, if someone can help me i will be greatful. My OS is Windowns 8.1 and the board is EasyPic V7.
Attachments
Error.png
Error.png (5.17 KiB) Viewed 3000 times
Top
User avatar
petar.timotijevic
mikroElektronika team
Posts: 1739
Joined: 19 Feb 2014 13:46
Location: Serbia
Contact:
Contact petar.timotijevic

Re: Device Unknown

#2 Post by petar.timotijevic » 26 Aug 2014 11:51

Hi,

Please can you attach screenshot of whole mikroProg Suite window and HQ photo of EasyPICv7 I need to see current configuration of development board.

Device drivers are installed correctly?


Best regards,
Peter
Top
pedrodurek
Posts: 4
Joined: 26 Aug 2014 03:56

Re: Device Unknown

#3 Post by pedrodurek » 27 Aug 2014 05:13

The drivers are ok.. i think...
Attachments
IMG_2483.JPG
IMG_2483.JPG (1.99 MiB) Viewed 2978 times
driver.png
driver.png (41.8 KiB) Viewed 2978 times
config.png
config.png (80.87 KiB) Viewed 2978 times
Top
User avatar
petar.timotijevic
mikroElektronika team
Posts: 1739
Joined: 19 Feb 2014 13:46
Location: Serbia
Contact:
Contact petar.timotijevic

Re: Device Unknown

#4 Post by petar.timotijevic » 27 Aug 2014 08:07

Hi,

Please can you try the following:

- Remove ZIF socket from development board and try to use MCU in board DIP socket,
- Disable LEDs DIP switches, SW3-1,2,3,4.


Best regards,
Peter
Top
pedrodurek
Posts: 4
Joined: 26 Aug 2014 03:56

Re: Device Unknown

#5 Post by pedrodurek » 27 Aug 2014 17:45

I tried it but didn't work yet =/, do you can help-me with something else?
Top
User avatar
petar.timotijevic
mikroElektronika team
Posts: 1739
Joined: 19 Feb 2014 13:46
Location: Serbia
Contact:
Contact petar.timotijevic

Re: Device Unknown

#6 Post by petar.timotijevic » 28 Aug 2014 08:16

Hi,

Please try to pull-down PORTB (PORTB DIP switch).

Disable 7-seg DIP switches (SW4-1,2,3,4).


Best regards,
Peter
Top
Post Reply

Return to “mikroProg™ programmer and debugger”