Hello,
i just try to get the VCP Example from Package running on a F401RE but got a lot of
Errors. Compiling for the Predefined F107VC works...
Has someone fixed this or is there an other VCP Code i can try ?
Thanks and Greetings
Calli
VCP Example for STM32F401RE
- dusan.poluga
- mikroElektronika team
- Posts: 780
- Joined: 02 Feb 2017 14:21
Re: VCP Example for STM32F401RE
Hi,
Can you share the link from where the example can be downloaded, or can you attach the zip archive with the project inside ?
Best Regards,
Can you share the link from where the example can be downloaded, or can you attach the zip archive with the project inside ?
Best Regards,
Dusan Poluga.
-
- Posts: 7
- Joined: 08 Dec 2014 12:53
Re: VCP Example for STM32F401RE
Hello,
Package ZIP:
https://libstock.mikroe.com/projects/do ... .2.1.0.zip
Used Package:
1409038078_usb_device_libra_mikropascal_arm.mpkg
Usb_Device_CDCClass_STM32
Greetings
Calli
Package ZIP:
https://libstock.mikroe.com/projects/do ... .2.1.0.zip
Used Package:
1409038078_usb_device_libra_mikropascal_arm.mpkg
Usb_Device_CDCClass_STM32
Greetings
Calli
- dusan.poluga
- mikroElektronika team
- Posts: 780
- Joined: 02 Feb 2017 14:21
Re: VCP Example for STM32F401RE
Hi,
Unfortunately this micro controller is not supported by the library.
This has been reported this to our developers.
I am sorry for the inconvenience.
Best Regards,
Unfortunately this micro controller is not supported by the library.
This has been reported this to our developers.
I am sorry for the inconvenience.
Best Regards,
Dusan Poluga.
-
- Posts: 7
- Joined: 08 Dec 2014 12:53
Re: VCP Example for STM32F401RE
Hi,
thought like this..
There are so much different Types and Versions of Controllers. So it is hard to decide which one should be used
in an own Project. I dont know if my choice can be added in some Days or its better to Change to a different Type.
I choosed this one because of his Speed, Size / Count of Pins and because there was the "Nucleo " Devboard which was
cheap and easy to get.
Greetings
Calli
thought like this..
There are so much different Types and Versions of Controllers. So it is hard to decide which one should be used
in an own Project. I dont know if my choice can be added in some Days or its better to Change to a different Type.
I choosed this one because of his Speed, Size / Count of Pins and because there was the "Nucleo " Devboard which was
cheap and easy to get.
Greetings
Calli
- dusan.poluga
- mikroElektronika team
- Posts: 780
- Joined: 02 Feb 2017 14:21
Re: VCP Example for STM32F401RE
Hi,
It is always good to reconsider at the beginning of your project to see if you have chosen the right tools for the job.
If you are not sure what to use i can recommend you tools that we use every day. That have proven their functionality many times.
One of those tools is our Clicker 2 Board.
The link below will take you to the product page of the device.
https://shop.mikroe.com/development-boa ... results=17
Maybe it will prove to be a better choice and help you waste less time during prototyping.
Best Regards,
It is always good to reconsider at the beginning of your project to see if you have chosen the right tools for the job.
If you are not sure what to use i can recommend you tools that we use every day. That have proven their functionality many times.
One of those tools is our Clicker 2 Board.
The link below will take you to the product page of the device.
https://shop.mikroe.com/development-boa ... results=17
Maybe it will prove to be a better choice and help you waste less time during prototyping.
Best Regards,
Dusan Poluga.