I have owned VTFT for many years.
Why are the Pic microcontroller IDE owners left behind?
Why do we NOT have fancy gauges and dials like the EVE layout, yet WE MUST PAY THE SAME MONEY!!! ?
Our screen size is also limited because to my knowledge, Mikroelektronika do not produce a mikromedia board for Pic with an 800x480 screen.
So if you don't produce one, we can't create one.
Enough said.
Why are owners of Pic IDE's in VTFT letf behind?
-
- Posts: 51
- Joined: 31 Dec 2012 21:54
- lana.arsic
- mikroElektronika team
- Posts: 1715
- Joined: 15 Jan 2016 12:50
Re: Why are owners of Pic IDE's in VTFT letf behind?
Hi,
There are components for gauges and dials for FT8xx graphic controllers,
on which exactly components are you referring which don't exist in compilers for PIC?
You can choose whenever size (which specific graphic controller supports it),
but in version of Visual TFT which is merged with compiler.
Please proceed with Visual TFT inside the newest version of the compiler (7.1.0)
instead of standalone version, since standalone version will not be updated anymore.
Kind regards,
Lana
There are components for gauges and dials for FT8xx graphic controllers,
on which exactly components are you referring which don't exist in compilers for PIC?
You can choose whenever size (which specific graphic controller supports it),
but in version of Visual TFT which is merged with compiler.
Please proceed with Visual TFT inside the newest version of the compiler (7.1.0)
instead of standalone version, since standalone version will not be updated anymore.
Kind regards,
Lana
-
- Posts: 51
- Joined: 31 Dec 2012 21:54
Re: Why are owners of Pic IDE's in VTFT letf behind?
Thank you Lana for your reply.
I am in the middle of creating a keyboard for an 800x480 screen, I do not remember how I got the page to stay on 800x480 because most of the graphics chips have a specific size!
Usually, selecting the SSD1963, the size only shows 640 x ....
I have saved the screen as a custom board.
I just clicked About and it only shows the Pic ide at rev 4.0.0, I do not see how to check the VTFT version.
It also says there are no updates.
I am not using ' FT8xx graphic controllers' so have very few options compared to that controller !
I think I tried the other week to use the FT8... library, I got ten million errors when trying to convert it to the 'world standard' 800x480 SSD1963.
I had to add the FT813 library to my MikroC Pro for Pic32 to get rid of lots of errors, after all that, there was sooo much stuff to amend and delete, I gave up.
So why does the FT library have all the functions and nearly everything else does not?
Since we are discussing the VTFT, it always removes code from the IDE when I attempt to adjust the smallest item in VTFT.
I go back to the IDE and half the code has gone!
Also, if I uncheck the box for Touchpanel, it still generates a small portion of code that has to be deleted everytime.
I have just retried to set a new screen to 800x480, it is soooo difficult, I think the FT813 was the only place that allowed a custom size !!
You make it sound easy, but it is not.
Try and build something for an 800x480 SSD1963 and let me know when it takes you more than 30 minutes.
I have attached some screen shots from tonight, it wont let me add the 4th capture with the many errors of 'undeclared items' etc
Thank you.
I am in the middle of creating a keyboard for an 800x480 screen, I do not remember how I got the page to stay on 800x480 because most of the graphics chips have a specific size!
Usually, selecting the SSD1963, the size only shows 640 x ....
I have saved the screen as a custom board.
I just clicked About and it only shows the Pic ide at rev 4.0.0, I do not see how to check the VTFT version.
It also says there are no updates.
I am not using ' FT8xx graphic controllers' so have very few options compared to that controller !
I think I tried the other week to use the FT8... library, I got ten million errors when trying to convert it to the 'world standard' 800x480 SSD1963.
I had to add the FT813 library to my MikroC Pro for Pic32 to get rid of lots of errors, after all that, there was sooo much stuff to amend and delete, I gave up.
So why does the FT library have all the functions and nearly everything else does not?
Since we are discussing the VTFT, it always removes code from the IDE when I attempt to adjust the smallest item in VTFT.
I go back to the IDE and half the code has gone!
Also, if I uncheck the box for Touchpanel, it still generates a small portion of code that has to be deleted everytime.
I have just retried to set a new screen to 800x480, it is soooo difficult, I think the FT813 was the only place that allowed a custom size !!
You make it sound easy, but it is not.
Try and build something for an 800x480 SSD1963 and let me know when it takes you more than 30 minutes.
I have attached some screen shots from tonight, it wont let me add the 4th capture with the many errors of 'undeclared items' etc
Thank you.
- Attachments
-
- screen3.JPG (32.69 KiB) Viewed 4432 times
-
- Screen2.JPG (91.35 KiB) Viewed 4432 times
-
- VTFT Screen1.JPG (122.66 KiB) Viewed 4432 times
-
- Posts: 51
- Joined: 31 Dec 2012 21:54
Re: Why are owners of Pic IDE's in VTFT letf behind?
Hi Lana,
I thought last night we were going off topic.
If one has the fusion v7 board, one is limited with the VTFT.
I thought last night we were going off topic.
If one has the fusion v7 board, one is limited with the VTFT.
- lana.arsic
- mikroElektronika team
- Posts: 1715
- Joined: 15 Jan 2016 12:50
Re: Why are owners of Pic IDE's in VTFT letf behind?
Hi,
you can choose whatever size that you want.
and version of Visual TFT which is merged with the compiler is the newest one.
And from now one with the newest version of the compiler, the newest version of Visual TFT will be integrated.
FT8xx graphic controllers already have integrated components for gauges and dials (for example),
that is why they can be chosen in Visual TFT.
two blank lines as per this post
I have tried, and it was working properly, can you please reinstall compiler as administrator?
Kind regards,
Lana
That issue is solved in the newest version of the compiler with merged Visual TFT,john.broderick wrote: Usually, selecting the SSD1963, the size only shows 640 x ....
I have saved the screen as a custom board.
you can choose whatever size that you want.
At this moment, the newest version of the compiler is 4.0.0,john.broderick wrote: I just clicked About and it only shows the Pic ide at rev 4.0.0, I do not see how to check the VTFT version.
It also says there are no updates.
and version of Visual TFT which is merged with the compiler is the newest one.
And from now one with the newest version of the compiler, the newest version of Visual TFT will be integrated.
Did you install compiler as administrator? Libraries for FT8xx now come with the compiler (version 4.0.0).john.broderick wrote: I had to add the FT813 library to my MikroC Pro for Pic32 to get rid of lots of errors, after all that, there was sooo much stuff to amend and delete, I gave up.
So why does the FT library have all the functions and nearly everything else does not?
FT8xx graphic controllers already have integrated components for gauges and dials (for example),
that is why they can be chosen in Visual TFT.
Did you place your code in section Users code? Did you try as workaround to surround change withjohn.broderick wrote: Since we are discussing the VTFT, it always removes code from the IDE when I attempt to adjust the smallest item in VTFT.
I go back to the IDE and half the code has gone!
two blank lines as per this post
I'm sorry because of this, that issue is reported to our developers.john.broderick wrote: Also, if I uncheck the box for Touchpanel, it still generates a small portion of code that has to be deleted everytime.
I'm sorry, but I couldn't reproduce the issue.john.broderick wrote: I have just retried to set a new screen to 800x480, it is soooo difficult, I think the FT813 was the only place that allowed a custom size !!
You make it sound easy, but it is not.
Try and build something for an 800x480 SSD1963 and let me know when it takes you more than 30 minutes.
I have tried, and it was working properly, can you please reinstall compiler as administrator?
Kind regards,
Lana
-
- Posts: 51
- Joined: 31 Dec 2012 21:54
Re: Why are owners of Pic IDE's in VTFT letf behind?
Further to my recent messages, I am now struggling with pictures BMP's
Before VTFT was merged, I had an 800x480 screen, I could import a bitmap, compile it, get the resources file and copy it to my main.
I would then simply write TFT_Image(0,0,mybitmap,1) and the picture would work 100% of the time.
Now it does not.
If I select 'external' and use a res file, it does work.
Are you able to help and point out why I can no longer get 800x480 pictures to work?
Just for ref, I have the F8.. 800x480 screen controller and I am using an ssd1963 controller.
My normal fusion 320x240 does still work for internal and external pictures.
Thank you.
Before VTFT was merged, I had an 800x480 screen, I could import a bitmap, compile it, get the resources file and copy it to my main.
I would then simply write TFT_Image(0,0,mybitmap,1) and the picture would work 100% of the time.
Now it does not.
If I select 'external' and use a res file, it does work.
Are you able to help and point out why I can no longer get 800x480 pictures to work?
Just for ref, I have the F8.. 800x480 screen controller and I am using an ssd1963 controller.
My normal fusion 320x240 does still work for internal and external pictures.
Thank you.
-
- Posts: 51
- Joined: 31 Dec 2012 21:54
Re: Why are owners of Pic IDE's in VTFT letf behind?
I have just Re installed MikroC pro for Pic32 after uninstalling it !!
I said VTFT will NOT let me change the size of the screen to 800x480 for the SSD1963
YOU SAID "That issue is solved in the newest version of the compiler with merged Visual TFT, you can choose whatever size that you want."
YOU ARE WRONG !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Tell me how to change an SSD1963 controller to 800x480 please with a BRAND NEW INSTALL ON WINDOWS 10 JUST AS IT USE TO WORK BEFORE YOU MESSED UP THE WHOLE LOT BY MERGING IT.
You also wrote "Did you install compiler as administrator?"
So doing that changes a screen size?
NO IT DOES NOT.
I said VTFT will NOT let me change the size of the screen to 800x480 for the SSD1963
YOU SAID "That issue is solved in the newest version of the compiler with merged Visual TFT, you can choose whatever size that you want."
YOU ARE WRONG !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Tell me how to change an SSD1963 controller to 800x480 please with a BRAND NEW INSTALL ON WINDOWS 10 JUST AS IT USE TO WORK BEFORE YOU MESSED UP THE WHOLE LOT BY MERGING IT.
You also wrote "Did you install compiler as administrator?"
So doing that changes a screen size?
NO IT DOES NOT.
Re: Why are owners of Pic IDE's in VTFT letf behind?
Hi John maybe this could help viewtopic.php?f=164&t=70909
Serge T.
Learning is an endeless process but it must start somewhere!
Learning is an endeless process but it must start somewhere!
-
- Posts: 51
- Joined: 31 Dec 2012 21:54
Re: Why are owners of Pic IDE's in VTFT letf behind?
Thank you Toley
It's very kind of you to help.
It sounds promising and will adjust the file right now.
It's very kind of you to help.
It sounds promising and will adjust the file right now.
-
- Posts: 51
- Joined: 31 Dec 2012 21:54
Re: Why are owners of Pic IDE's in VTFT letf behind?
OMG !!!!!
2 minutes work and problem solved !!
It proves that the latest version of the software had not been fixed.
I found the correct files, right click in Windows 10 and 'edit' appears.
Changed original file and Mikro's file and job done in 2 minutes.
Toley you are quite magic
Thank you very very much.
2 minutes work and problem solved !!
It proves that the latest version of the software had not been fixed.
I found the correct files, right click in Windows 10 and 'edit' appears.
Changed original file and Mikro's file and job done in 2 minutes.
Toley you are quite magic
Thank you very very much.
- Attachments
-
- Magic.JPG (62.99 KiB) Viewed 4337 times
-
- Posts: 51
- Joined: 31 Dec 2012 21:54
Re: Why are owners of Pic IDE's in VTFT letf behind?
Hi Toley,
My bitmaps are now working as they did years ago before the programs were messed up with the update, some update when I can't do what I use to do.
Thank you again for the correct information.
If you're interested in SSD1963 screen capture, I have just put a video on YouTube showing how easy it is once we know what bits to use.
My bitmaps are now working as they did years ago before the programs were messed up with the update, some update when I can't do what I use to do.
Thank you again for the correct information.
If you're interested in SSD1963 screen capture, I have just put a video on YouTube showing how easy it is once we know what bits to use.
- lana.arsic
- mikroElektronika team
- Posts: 1715
- Joined: 15 Jan 2016 12:50
Re: Why are owners of Pic IDE's in VTFT letf behind?
Hi,
I have answered you on the ticket,
I suggest to continue our correspondence there.
Kind regards,
Lana
I have answered you on the ticket,
I suggest to continue our correspondence there.
Kind regards,
Lana