STM32F429 Internal TFT Driver

[dsiegel]

A suggestion to implement a driver for the STM32F4, STM32F7 internal TFT drivers.

[Aleksandar.Mitrovic]

Hi,

Thank you for this suggestion.

I will forward it to our Development team for further consideration.

Best regards,
Aleksandar

[Karamel]

I would suggest it but I have seen this post.

Please, support stm32F429's or stm32F7's DMA2D graphics unit. It is so powerful than ft8xx and others. I would like to want visual tft become the best gui platform around the world.

Thank you mikroelektronika team

[Karamel]

Stm32f7 series have been supported from mikroc but there is nothing for visual tft....

[Aleksandar.Mitrovic]

Hi Karamel,

Stm32f7 series have been supported from mikroc but there is nothing for visual tft

Yes, unfortunately update for STM32F7 came after the update or Visual TFT therefore we didn't support him.
But it should be supported in some of the following update of Visual TFT.

Please, support stm32F429's or stm32F7's DMA2D graphics unit.

I will forward your suggestion to our developers to consider adding this in some off the future updates of our Visual TFT.
Thank you for this suggestion.

Best regards,
Aleksandar

[mcumake]

Yes
Please add support for an internal driver !!

You selected SSD1963 drivers on the big screen, they do not work too well.
When you refresh the screen flickering screen. Driver is very slow.

It is more than necessary to supplement internal hardware support !!
Use of power ARM architecture.

for example
http://www.mikroe.com/mikromedia/7/stm32f7/
In this project, use the SSD driver is crazy !!
Series F7 has an internal FTF driver and connectivity SDRAM.

Work on it
Thanks very much

[Aleksandar.Mitrovic]

Hi,

Unfortunately at this moment we do not have that library as you know.

We have a list of the enhancements where users can vote for the enhancement which they want.

Please take a look, vote or suggest the enhancement:
viewtopic.php?f=146&t=68444

Kind regards,
Aleksandar