Alternate parity and stop bits for UARTs

Post your requests and ideas on the future development of mikroPascal for dsPIC30/33 and PIC24.
Post Reply
Author
Message
jgilkey
Posts: 1
Joined: 31 Mar 2005 00:07

Alternate parity and stop bits for UARTs

#1 Post by jgilkey » 31 Mar 2005 00:10

It would be nice to be able to change the parity and number of stop bits for the UART ports. For example, I need to talk to a device at 9600 baud, 8E2 for parity and stop bits.

Joe
Top
User avatar
zristic
mikroElektronika team
Posts: 6608
Joined: 03 Aug 2004 12:59
Contact:
Contact zristic

Re: Alternate parity and stop bits for UARTs

#2 Post by zristic » 31 Mar 2005 03:00

jgilkey wrote:It would be nice to be able to change the parity and number of stop bits for the UART ports. For example, I need to talk to a device at 9600 baud, 8E2 for parity and stop bits.
Will be considered/implemented.
Top
LGR
Posts: 3204
Joined: 23 Sep 2004 20:07

#3 Post by LGR » 16 Apr 2005 20:41

For both PIC and dsPIC, the manual for the library function should state clearly what the byte structure is; i.e. 8 data bits, 1 stop, no parity (if that is correct), or whatever it is. Being able to adjust this would be nice, but knowing what it is is essential. :?
If you know what you're doing, you're not learning anything.
Top
Post Reply

Return to “mikroPascal for dsPIC30/33 and PIC24 Wish List”