I have been struggling to make Visual GLCD work with EasyPIC v8.
Is this possible, or am I wasting my time?
I am using VGLCD dongle version 2.7.1 and MikroC for PIC version 7.6.0. PIC 18F47K42 32MHz from 8MHz crystal x4 PLL
Simple test project attached, but PORTE LEDs will not toggle. Had to create my own VGLCD project file, as EasyPIC 8 config seems to be unavailable.
Maybe I am doing something wrong? Any guidance gratefully received.
EasyPIC v8 not working with Visual GLCD
EasyPIC v8 not working with Visual GLCD
- Attachments
-
- TrialMikroC.zip
- (185.02 KiB) Downloaded 108 times
Start every day with a smile...... (get it over with)
- jovana.medakovic
- mikroElektronika team
- Posts: 986
- Joined: 18 Dec 2018 10:36
Re: EasyPIC v8 not working with Visual GLCD
Hello,
Your calibration constants are not correct.
I added the calibration function and now it works fine.
Try to load the project from the attachment and let me know the result.
Kind regards,
Jovana
Your calibration constants are not correct.
I added the calibration function and now it works fine.
Try to load the project from the attachment and let me know the result.
Kind regards,
Jovana
- Attachments
-
- TrialMikroC.zip
- (200.5 KiB) Downloaded 121 times
Re: EasyPIC v8 not working with Visual GLCD
Thanks Jovana,
Manual calibration works perfectly.
Should have worked that out for myself, but when I work too long on a problem, it seems to cause blindness.
Solution is much appreciated, and I am very happy that Visual GLCD really does work on EasyPIC v8
Manual calibration works perfectly.
Should have worked that out for myself, but when I work too long on a problem, it seems to cause blindness.
Solution is much appreciated, and I am very happy that Visual GLCD really does work on EasyPIC v8
Start every day with a smile...... (get it over with)
-
- Posts: 71
- Joined: 04 Oct 2020 22:32
Re: EasyPIC v8 not working with Visual GLCD
I see you have upgraded! Congrats!
If you cant solve your problem then I'm sorry to say this but your stupid...