Hi jpc,
Thanks so much for that link. Looks like a very nice module. It appears to be a modification of the smaller original Nordic layout for SMA connector, modified for a chip antenna. I have actually been looking for this. I think this would be a better candidate for me beyond the PDIP-prototype stage if it works well. They do link to a Taiwanese distributor on their links page. The price is about $11 with VAT which quite good unless they take it back on the shipping charges; it is currently not listed as in stock. (Edit: Looks like they are also sold through the Plimus link at even lower pice).
It will be interesting to hear about your experiences with it.
Code for wireless transceiver nRF2401A ? (edit: or nRF24L01)
-
danishali2012
- Posts: 3
- Joined: 31 Mar 2010 18:10
Re: Code for wireless transceiver nRF2401A ? (edit: or nRF24
Hi,
I am using TRF-2.4G laipac transceiver in which the chip nRF2401 is used. I want to transmit data from 15 meters. But it is not working. I programmed it with Atmel AT89LV51 low voltage(i.e.3V) controller and connected that 10 pin module with this controller but it is not working.
Please help me in order to use this transceiver. I am using it in my under-grad final year project and i have very small time please help me out. I will be very thankful to you all.
Regards,
Danish Iqbal
I am using TRF-2.4G laipac transceiver in which the chip nRF2401 is used. I want to transmit data from 15 meters. But it is not working. I programmed it with Atmel AT89LV51 low voltage(i.e.3V) controller and connected that 10 pin module with this controller but it is not working.
Please help me in order to use this transceiver. I am using it in my under-grad final year project and i have very small time please help me out. I will be very thankful to you all.
Regards,
Danish Iqbal
-
danishali2012
- Posts: 3
- Joined: 31 Mar 2010 18:10
Re: Code for wireless transceiver nRF2401A ? (edit: or nRF24
Hi,
I am using TRF-2.4G laipac transceiver in which the chip nRF2401 is used. I want to transmit data from 15 meters. But it is not working. I programmed it with Atmel AT89LV51 low voltage(i.e.3V) controller and connected that 10 pin module with this controller but it is not working.
Please help me in order to use this transceiver. I am using it in my under-grad final year project and i have very small time please help me out. I will be very thankful to you all.
Regards,
Danish Iqbal
I am using TRF-2.4G laipac transceiver in which the chip nRF2401 is used. I want to transmit data from 15 meters. But it is not working. I programmed it with Atmel AT89LV51 low voltage(i.e.3V) controller and connected that 10 pin module with this controller but it is not working.
Please help me in order to use this transceiver. I am using it in my under-grad final year project and i have very small time please help me out. I will be very thankful to you all.
Regards,
Danish Iqbal
-
danishali2012
- Posts: 3
- Joined: 31 Mar 2010 18:10
Re: Code for wireless transceiver nRF2401A ? (edit: or nRF24
Hi,
I am using TRF-2.4G laipac transceiver in which the chip nRF2401 is used. I want to transmit data from 15 meters. But it is not working. I programmed it according to datasheet with Atmel AT89LV51 low voltage(i.e.3V) controller and connected that 10 pin module with this controller but it is not working. I do not know what is test configuration in the datasheet and how does it work.Please help me to make it in working condition.
Please help me in order to use this transceiver. I am using it in my under-grad final year project and i have very small time please help me out. I will be very thankful to you all.
Regards,
Danish Iqbal
I am using TRF-2.4G laipac transceiver in which the chip nRF2401 is used. I want to transmit data from 15 meters. But it is not working. I programmed it according to datasheet with Atmel AT89LV51 low voltage(i.e.3V) controller and connected that 10 pin module with this controller but it is not working. I do not know what is test configuration in the datasheet and how does it work.Please help me to make it in working condition.
Please help me in order to use this transceiver. I am using it in my under-grad final year project and i have very small time please help me out. I will be very thankful to you all.
Regards,
Danish Iqbal
Re: Code for wireless transceiver nRF2401A ? (edit: or nRF24
I think you have a much better chance to get an answer in the dedicated wireless Sparkfun forum,
http://forum.sparkfun.com
And try to be more specific as to what code and configurration you are using.
Personally I have not gotten time to write code and try ot these tranceivers yet.
These triple posts - is there a hickup in the forum software here lately?
http://forum.sparkfun.com
And try to be more specific as to what code and configurration you are using.
Personally I have not gotten time to write code and try ot these tranceivers yet.
These triple posts - is there a hickup in the forum software here lately?
