visual TFT FT800 dsPIC33EP512MU810

[federico.avellina]

Hi,

I bought easypicfusion and EVE click.
I am using the default settings.

I can not see the example. Someone can help me?
thanks!!

[marina.petrovic]

Hi,

If you use Visual TFT there you can find example for EasyPIC Fusion v7 (dsPIC33EP512MU810) and ConnectEVE.
If you use EVE click (connected for example with mikroBUS socket 1), you need to adjust hardware connections in Visual TFT Project Settings and pins related with SPI.

EasyPIC Fusion mikroBUS socket 1 and EVE click connection:
- RST (PD) pin: RC1
- CS pin: RC2
- SCK: PD15 (RP79)
- MOSI: RF8 (RP104)
- MISO: RF2 (RP98)
- AN pin: RB8 (pull-down on EasyPIC Fusion v7 board).

In attachment, you can find Hardware Pattern for EasyPIC Fusion and EVE click which you should copy into:
...Visual TFT installation folder/Board defs
and then you will be able to choose Hardware Pattern for your projects.
Please, pay attention that Visual TFT project and compiler project are written for mikroC PRO for dsPIC (you didn't mentioned which compiler you use) and if you use mikroBasic and mikroPascal you can simple adjust existing hardware pattern (MCU_Init() routine) according to one from attachment.
Please, pay attention that you should pull up RB8 pin on EasyPIC Fusion v7 board.

Best regards,
Marina