Hi everybody ! Firstly excuse me for my english because I'm french and I try to write without translator !!
Secondly, here is my problem : I have bought an easy pic 7 on mikroe.com and now, I would like to buy a "micromedia board for 18FJ" with "gaming shiel" and I don't know if I can program this one with mikroc and a usb cable . Thank you .
program a mikromedia board for 18FJ with Mikro C
Re: program a mikromedia board for 18FJ with Mikro C
Hi,
You cannot program it using the USB cable, but you can upload the generated HEX files using the integrated bootloader.
Regards,
Filip.
You cannot program it using the USB cable, but you can upload the generated HEX files using the integrated bootloader.
Regards,
Filip.
Re: program a mikromedia board for 18FJ with Mikro C
Hello ! A yes okay !! And what is the software I can use, or maybe there is already one with de board ? Do I buy the MikroProg programmer ?( http://www.mikroe.com/eng/products/view ... and-pic32/ ). And a last question is it difficult to programm this mikromedia board ?
Thank you in advance !
Thank you in advance !
Re: program a mikromedia board for 18FJ with Mikro C
Hi,
There is a bootloader software for mikromedia for PIC18FJ, which can be downloaded from the following address :
http://www.mikroe.com/eng/products/view ... r-pic18fj/
You can also buy a programmer if you feel more comfortable working with it.
The programming of the board is fairly simple, just attach the mikroProg to it and you are ready to work.
Regards,
Filip.
There is a bootloader software for mikromedia for PIC18FJ, which can be downloaded from the following address :
http://www.mikroe.com/eng/products/view ... r-pic18fj/
You can also buy a programmer if you feel more comfortable working with it.
The programming of the board is fairly simple, just attach the mikroProg to it and you are ready to work.
Regards,
Filip.
Re: program a mikromedia board for 18FJ with Mikro C
Ok thank you for the software . So If I wanna buy the mikromedia 18FJ, I need the mikromedia board( http://www.mikroe.com/eng/products/view ... r-pic18fj/ ), the programmer ( http://www.mikroe.com/eng/products/view ... and-pic32/ ), a battery if I wanna use the board without PC ( http://www.mikroe.com/eng/products/view ... st-shield/ ) and for games this one ( http://www.mikroe.com/eng/products/view ... ng-shield/ ) . And I see I need connector to connect the battery and the mikromedia GAMING Shield but i don't know what I must buy to connect them . Can you help me and sorry for all these questions !
Re: program a mikromedia board for 18FJ with Mikro C
Hi,
As for the mikromedia GAMING Shield, you will need two Female Sockets 1x26pin (as stated here : http://www.mikroe.com/eng/products/view ... ng-shield/),
to connect it to the mikromedia for PIC18FJ, taking in concern that Male Pin Headers 1x26pin (distributed with the board) are soldered on the mikromedia for PIC18FJ (described here: http://www.mikroe.com/eng/downloads/get ... shield.pdf).
Regards,
Filip.
With the mikromedia for PIC18FJ you will get a soldered female connector on which you will connect the battery, there is no need for purchasing another battery connector.And I see I need connector to connect the battery and the mikromedia GAMING Shield but i don't know what I must buy to connect them . Can you help me and sorry for all these questions !
As for the mikromedia GAMING Shield, you will need two Female Sockets 1x26pin (as stated here : http://www.mikroe.com/eng/products/view ... ng-shield/),
to connect it to the mikromedia for PIC18FJ, taking in concern that Male Pin Headers 1x26pin (distributed with the board) are soldered on the mikromedia for PIC18FJ (described here: http://www.mikroe.com/eng/downloads/get ... shield.pdf).
Regards,
Filip.