GSM cellular module working with PIC

General discussion on mikroC.
Post Reply
Author
Message
Thunder
Posts: 4
Joined: 20 Oct 2007 21:38

GSM cellular module working with PIC

#1 Post by Thunder » 20 Oct 2007 21:46

Hi,

I am looking for a board controller working with a Microchip PIC and a GSM cellular Module where I can write my applications?
I will prefer a board that works with Mikroelektronika compiler.

Thanks.
Top
CG
Posts: 1
Joined: 21 Oct 2007 09:12

#2 Post by CG » 21 Oct 2007 09:28

Hello Thunder,

I was looking myself for a board like that 3 weeks ago, I have search the internet and found a company that has a GSM/GPRS Controller with a PIC18F6722 on board. Your can write your own application and they have all the software driver to start working immediately. I bought one myself, and programmed a small procedure that sends and receives SMS messages in just minutes as they say.

The nicest think is that they use the Mikroelektronika compiler as their software editor.

Hope I helped you...


Opss.. almost fogot, their website is:

www.u-controls.com

CG.
Top
Thunder
Posts: 4
Joined: 20 Oct 2007 21:38

#3 Post by Thunder » 22 Oct 2007 20:33

Thank you very much CG, I have look on ucontrol website and download their user manual for the Pix-Cell GSM controller, very easy to program with alot of libraries I will probably order one myself.

Again Thanks
Top
Yahoo
Posts: 1
Joined: 28 Oct 2007 15:57

#4 Post by Yahoo » 28 Oct 2007 16:08

Thunder,

There are allots of GSM controller, do a search in Google and you will find what you are looking for.

Anyway, I worked with two GSM controllers from 2 companies. One is Biene Electronics, they have a GSM controller where you can set the outputs and inputs by SMS messages.

The second company is UControl Solutions where you write your own application.

I founded that UControl's controllers are much easier to work, with all the driver build in. I am a software engineer and I don't want to be involved with the electronics so their controller is perfect.

Take Care
Top
Thunder
Posts: 4
Joined: 20 Oct 2007 21:38

#5 Post by Thunder » 29 Dec 2007 17:44

Try this,

http://www.jaycar.com.au/productView.asp?ID=KC5400

you can connect a regular Nokia 3210, 3310 and 6110.
Top
Helen
Posts: 1
Joined: 07 Apr 2012 11:13

Re: GSM cellular module working with PIC

#6 Post by Helen » 07 Apr 2012 11:39

Hi,

I have Ucontrol Pix-Cell GSM controller. I am not sure how to create the Pix-Cell functions library in MikroC PRO PIC compiler software.

Can someone please advise me?

Thank you very much for your help.
Top
User avatar
janko.kaljevic
Posts: 3565
Joined: 16 Jun 2011 13:48

Re: GSM cellular module working with PIC

#7 Post by janko.kaljevic » 09 Apr 2012 08:28

Hello,

As I see, this board has Telit GE864 module and you can communicate with it through UART using AT commands:
www.telit.com/module/infopool/download.php?id=542

Best regards.
Top
Post Reply

Return to “mikroC General”