Hello i have mikropascal for dspic, and easy dspic board,
When i want to prog the dspic 33FJ128MC802 the mikro prog say: device detect: PIC33FJ128MC802
device select: Lvpicflashprog.
continue anaway?
I push si and then program ok the dspic, tha question is why show this message before program.
I have the lv 24-33 program too, i try program with thwm the pic in protoboard and shoe the same message, but program ok the dspic.
I send the project and un snapshot the windos message,
KInd regard.
problem with microprog suite
-
- Posts: 272
- Joined: 17 Feb 2009 02:39
- Location: Colombia
- Contact:
problem with microprog suite
- Attachments
-
- dspic33f.rar
- This the project with mikropascal
- (48.54 KiB) Downloaded 181 times
-
- this show the mikroprog suite when push program
- mikroprog.jpg (160.39 KiB) Viewed 3633 times
Re: problem with microprog suite
Hi,
Please, can you be more detailed when explaining this issue ?
Describe me step by step how can I reproduce this issue.
Which development systems are being used ?
Were they connected at the same time ?
Regards,
Filip.
Please, can you be more detailed when explaining this issue ?
Describe me step by step how can I reproduce this issue.
Which development systems are being used ?
Were they connected at the same time ?
Regards,
Filip.
-
- Posts: 272
- Joined: 17 Feb 2009 02:39
- Location: Colombia
- Contact:
Re: problem with microprog suite
Ok i jave win7 x64.
the compiler is mikropascal for dspic v4.8
the develoment system is: Easy24-33 v6
when i press build and program then the microprog suite show the message, that i send you . the dspic recive the program and work. the problem es the windows message before program the device.
i try to program too in protoboard the dspic with LV24-33 PROGRAMMER AND EQUAL the microprog suite show the windows message.
the compiler is mikropascal for dspic v4.8
the develoment system is: Easy24-33 v6
when i press build and program then the microprog suite show the message, that i send you . the dspic recive the program and work. the problem es the windows message before program the device.
i try to program too in protoboard the dspic with LV24-33 PROGRAMMER AND EQUAL the microprog suite show the windows message.
-
- Posts: 272
- Joined: 17 Feb 2009 02:39
- Location: Colombia
- Contact:
Re: problem with microprog suite
OK i invited you make this.
open mikropascal pro for dspic.
select project- new project, put any name and then in device selec P33FJ128MC802.
ok in this moment the program window show.
program name;
{ Declarations section }
begin
{ Main program }
end.
ok push build and program icon
then the mikroprog suite open automatic but show the windows messsage that a tell you:
device detect: P33FJ128MC802.
device select:Lvpic falsh prog.
if i press si then program the dspic.
also i invited make do: in mikropascal in program edit, setting disabled the wachtdog.
then press build and program icon. press yes to the windows message that show mikropro suite.
then view the mikro setting in mikroprog suite this change the watchdog and put: Always enable.
Ok this probe is with mikropascal pro for dspic 4.8 and mikroprog suite v1.1
and try this in other pc with mikropascal pro 4.6 and old version mikroprog suite, and no show the message
but the mikro program not burn well dont work.
i believe this is incompatible with mikropascal pro for dspic setting and mikroprog suite in the P33FJ128MC802 device.
please give solution to this.
kind regard.
open mikropascal pro for dspic.
select project- new project, put any name and then in device selec P33FJ128MC802.
ok in this moment the program window show.
program name;
{ Declarations section }
begin
{ Main program }
end.
ok push build and program icon
then the mikroprog suite open automatic but show the windows messsage that a tell you:
device detect: P33FJ128MC802.
device select:Lvpic falsh prog.
if i press si then program the dspic.
also i invited make do: in mikropascal in program edit, setting disabled the wachtdog.
then press build and program icon. press yes to the windows message that show mikropro suite.
then view the mikro setting in mikroprog suite this change the watchdog and put: Always enable.
Ok this probe is with mikropascal pro for dspic 4.8 and mikroprog suite v1.1
and try this in other pc with mikropascal pro 4.6 and old version mikroprog suite, and no show the message
but the mikro program not burn well dont work.
i believe this is incompatible with mikropascal pro for dspic setting and mikroprog suite in the P33FJ128MC802 device.
please give solution to this.
kind regard.
-
- Posts: 272
- Joined: 17 Feb 2009 02:39
- Location: Colombia
- Contact:
Re: problem with microprog suite
please solve this problem, apparently is incompatible with the configuration word in mikroPascal for dsPIC and mikroprog suite with dspic33fj128mc802. mikroprog suite the ever changing certain parameters already configured in the draft mikroPascal, then touches my mikroprog suite re-select the setting you want about anything related to disable the watchdog and PWM pins and reschedule, but his is very tedious.
Kind regard.
Re: problem with microprog suite
Hi,
I believe I have helped you via e-mail.
Regards,
Filip.
I believe I have helped you via e-mail.
Regards,
Filip.
-
- Posts: 272
- Joined: 17 Feb 2009 02:39
- Location: Colombia
- Contact:
Re: problem with microprog suite
Ok very thank you.
great work.
I wait the next release.
Kind Regard.
great work.
I wait the next release.
Kind Regard.