has this topic died now?

hi i would also like to know the answer to this as i am experiencing the same problem. The ENC28 never recovers and has to be rebooted.
Paul

Hi guys, i am still having trouble with the Ethernet library. item 1 Firstly when i go away and back again to my web page it is fine but it will only do this up to the amount of sockets available. Even though when the buffer is empty i am sending a tcp disconnect. The reload will go past the socket ...

if i alter the sockets setting to 4 i can then load the web page 4 times before it stops. It appears to definitely be linked to the sockets setting. Do you have a demo that i can use for the 18f45k22 and the serial ethernet card or click card? Paul.

Thanks for that.
My problem is that if i set the sockets for 3. i can load the webpage o.k then close it, open it again but after opening it 3 times the web page will not be served ever. what could cause this?

Hi Guys, I am using the Net_Ethernet_28j60 library in a new project which is working fine. if i set the sockets to 3 then the unit will only serve the webpage 3 times. What could i be doing wrong it appears that it is not releasing the sockets properly. The Net_Ethernet_28j60_disconnectTCP instructi...

I have had great success with the MCP23S017 port expander on a project but i have decided to use the 09 on this project and i cannot get it to respond at all. Has anyone had success getting the MCP23s09 to work? i think it may be something to do with the spi in byte mode as opposed to word mode. Doe...

soon please, as i have finished all the rest of my project but cannot test it.

Paul.

i have EP7 as well but i still cannot seem to program it

Why allow it to have software written but not programmed?
How long will it be is there any other way of getting the code into the chip?

Paul.

i have written some software for the pic 16f1826 o.k. but now i cannot program the chip with mikroe suite. as the chips is not supported. Can anyone assist with an idea. Cheers in advance Paul.

Hi,
i found the chip in mikroe developer but i cannot find it in the mikrosuite. how are you programming the chip?

How long before the Basic version of the ethernet is being. Paul

I am developing a project with ethernet and also lcd. i have got it working successfully on the easypic6 many different processors inc 18f2420. I am now trying to port it over to the k series chip but cannot get the SPI to work on the easylv18f. i have put one of the 18f2420 programmed chips onto th...

Hi, I am trying to make a battery powered device so power is of a premium. When i put the Pic 16f88 to sleep the uart pin RB5 stays hi which is drawing current from the supply as it is going into a RF transmitter that is turned off. How can i turn RB5 off when in sleep, i have tried TRISB = %1111111...