Can you direct me to the authoritative documentation for the ble9 library, on which the example app is based? This library communicates with the BLE 9 click over a serial link (EUART RX/TX lines). I've found generated documentation for it, but no user documentation that explains how this interface w...

I just tried this out using a PIC18F27K42 and succeeded. PIC10F320 and PIC16F15325 also tried and working. Make sure that the DBG SEL switch is selected to "ON-BOARD" Getting the correct connections from the RJ12 socket may be tricky - the adapters that I tried first are simply not wired to do this...

Is it possible to use CODEGRIP on an MCU that is external to the EasyPIC v8 development board? I'm trying to program a PIC18F27K42 located on a Ready for PIC board. The Ready for PIC board has a 10 pin header for programming, assuming you cut traces and solder the supplied 10 pin header to the board...

I'm trying to integrate the Color 9 click into a design based on a PIC18F27K42 MCU. When the Color 9 Click library is imported from LibStock, in a configuration for this MCU, any attempt to compile an application program with the Color 9 library checked in the lib manager, results in the following e...

Thanks for you analysis, and for sending the source code. I was able to write a "spoofer", or set of transformation methods, that convert the one byte I2C calls from the RTC 9 driver, to the multi-byte I2C methods in the K42 I2C driver. This worked, but the RTC 9 was still ill-behaved. So, I went ah...

I'm using MikroC PRO for PIC release 7.6 with the easyPIC v8 development board. This post is raising a new, but related issue to which this is a reply. I just updated the compiler and took delivery of this development board. I replaced the 40 pin MCU the v8 development contained, with a 28 pin devic...

Hi, It is possible with the mikroSDK2.0 library for this click board in Necto Studio. So, I believe the project you noticed is written in Necto Studio. The source code of this library is available here: https://github.com/MikroElektronika/mikrosdk_click_v2/tree/master/clicks Kind regards, Thanks mu...

Hi, If you try to change the DPI settings, do you have some improvements ? Regards, Filip. I tried to change the screen resolution (lowering it), but that didn't help. However, altering the scaling factor, in the Scaling and Layout dropdown, from the recommended 200% to 300% did help. The only prob...

I've noticed that some of your application example videos are able to do this, including scrolling text across multiple 7x10 LED matrix click boards at once. I've examined the schematic for the 7x10 R Click board, as well as the source for the driver on GIthub. However, from the looks of it, the exi...

filip wrote: ↑

30 Sep 2020 08:03

Hi,

Can you please attach a screenshot of this issue ?

Regards,
Filip.

Sure thing. Here is the screen shot.
However, it looks normal when it is attached herein, even on the same Surface Pro running Windows 10.

I'm working with the latest CODEGRIP on a Surface Pro laptop running Windows 10 Pro. When I run CODEGRIP, it establishes the normal user interface in dark mode, but the font is so small, I need a magnifying glass to make out what it is saying. There appear to be no settings that allow the font to be...