thanks for answering
the error was mine when using pic 16f628a, this pic does not have adc, if not analog comparators, I have read the data sheet.
use pic 16f88 and it has adc and the program compiled without errors attached image
And thanks again

Hi guys, I'm working on a light sequencer with pic 16f628a. I use the mikro basic compiler for pic. but when compiling it gives me the following errors attached image The comments are in Spanish I hope you can help me thank you :( program Secuenciador main: 'Este es el cuerpo del programa 'Declaraci...

Hello, I recently received help from the user PV31, I appreciate your help initially and I improved the pic basic pro (pbp) code a bit, symmetrical source code.
But I reduced the code to 54 programming lines and it uses pic 16f877a and lm358 operational amplifier in inverter mode.
attached image

hello thanks for answering In the attached file, see an image of the drivers installed in Windows 10. Another thing that I have discovered the avrflash application must be run as administrator in windows 10 to work correctly and schedule the avr. If the avrflash application is not run as administrat...

I bought mikroprog for avr a long time ago, I have read the instructions manual of the programmer configuration pins, I have tried to program the attiny85, but the application shows a message access denied because there is no hardware communication, and I have carefully checked the programmer connec...

hello friend, I inform you that I approved the project at the university and it was all thanks to you friend.
I'll write you from hotmail,
Jose Luis

I sent you 2 messages to staff and private.
In both messages I shared all the information, and I hope you can help me and thank you

Do you want me to post the code here? Or did I send you the code by internal message?
thanks for replying again

thank you very much for answering, you know I made a code in pbp with pic 16f877a, in the proteus simulation with a 20x2 lcd the negative and positive voltages are recorded, but these remain blinking and do not remain fixed, and I also want to migrate this code to it works in pic 16f887. I send you ...

Excuse me friends, I know that this forum is not for the pic basic pro language, I just wanted to ask if someone has programmed in pic basic pro, better known as PBP.
Thank you
Jose Luis

Thanks for the help again, I think you should declare the expressions Kohm and Mohm how Char?
and perform the respective divisions so that it takes the Kohm and Mohm values?

friend thanks for the good help the code and the simulation is working perfect, and on the lcd display it records the desired values, I have noticed that all the resistors that I have placed on tests always register me in Ohm, the ideal is that I register in Kohm and Mohm, how can I register for Koh...

friend thank you very much for help and blessings always

José

friend again thanks for the help again.
Now when simulating in Proteus it does not display a message, I have also configured the fuses, I attached the images




jose

friend thank you very much for the help again, check the boxes indicated, I compiled the code again and now it generates another error, attached the image says LCD_7
what can be friend?