Thanks Dusan,

Great help.

And yes it works !!.

Best Regards,

Willem van Dalen.

I try to make a program using the CAN library. and like to use the testmode, with loop-back. I recognized that i only had 3 opties to select for the CAN_OperationMode. - Initialization = 0 - Normal = 1 - Sleep = 2 I like to use more modes llike the no "automatic transmission", "testmode", etc.... I ...

Great thanks,

Have the same problem with my shield on the Mikromedia plus for STM32F7 ARM
Great !!!!
Now I can find it in MikroC, I got signal on RX and TX, but how to set the clock for the STM32F746 to use the USART2

Greeting Willem

Hello to all, I use the Mikromedia plus shield and on the microbus i like to use the UART2. Is it true, the UART connection for the 4 microbus connectors are the same (UART2) ? and the CS connection don't work for the GPS-click board :-( I like to use UART2-TX(PD5) and UART2-RX(PA3) as as alternate ...

Hello Danilo,

Thanks for the quick answer.

Greeting, Willem

Hello, I bought the mikromedia plus about 2 months ago. I had some problems to start to compile the examples. I installed the librarys named NETWORK_ETHERNET_ARM and FAT32 compiling gives errors. The header files (*.h) you have to copy to the directory packages\FAT32\uses .....\NETWORK_ARM_ETHERNET....

Thanks, I think the best fit is the nulcleo144 board, it have almost the same infterfaces en the same MCU as the micro media plus from ARM stm32F When i tried to compile the example with mikro pro c, it was difficult to configure the clock. At last i used the STM7..... on 216MHz with USB and Etherne...

I am searching for a Board Support Package (BSP) for STM32CubeMx / STM32CubeF7
i use the mikro media plus stm32F7, if this is not supported, can i use a existing board, like the Discovery ?

Please can you give an example for a clicker-2 with can-1 5v clickboad.
I like to use 1mb baudrate but my sheet stay empty.

I try different values but the max i can use is 500mb

Thanks for the answer.

Can you please give an example for 1Mb baudrate dor CAN,
I use a Can-1 clickboard 5v, on a stm clicker2 board stm32f40..

I try to use different frequenties and i get only a empty sheet

Thanks