Hello, After few installation, it's works ! Sans titre.jpg Did you know if it's possible to know what is inside ? c9dof_writeData( _C9DOF_CTRL_REG6_XL, _C9DOF_CTRL_REG6_XL_CONFIG ); c9dof_readMag( &magX, &magY, &magZ ); What's inside the function void c9dof_writeData(); and void c9dof_readMag(); Wha...

one more time I am very dessapointed by mikroelekronika . You use librairires and you can not see what's inside. you sell modules using your libraries Where is this F..KING focntion c9dof_i2cDriverInit( (T_C9DOF_P)&_MIKROBUS1_GPIO, (T_C9DOF_P)&_MIKROBUS1_I2C, _C9DOF_ADDRESS_00 ); What is she does Th...

hello ,

I can't use a 9DOF moduleon my clicker 2 PIC18FJ .

In the librairy I can't find the mikrobus_I2C_Init . So the example found in the libstock doesn't work with the clicker 2 ?

Have you got an issu to install the mikrobus_I2C_Init for Clicker 2 ?

Thank you

Nobody ?

Hi everybody, I don't arrive to connect two module BT-audio-click together . After lots of try, i wonder if it's possible ! I think I have understand the principe of connexion like , discovery, pairing and connecting, but I don't find How to do a master. By defaut the module is a slave, and with a s...

Hi again,

My question is still relevant !

How Can I do to erase the bootloader of my device ?


If I program it with a external programmer it's ok ? The memory space where is bootloader will be cleared ?

Thx

.... I don't want program my device ! I want than my device start the most quickly as soon as possible. For that, I don't want wait for bootloader détection ( during 2 second aprox.). Actually, when I power-ON my device, the device wait for USB connexion throught bootloader , and it's too long (2 se...

I think than I do not express my problem well. I have a external programmer too . I will be able re-install with my external programmer, it's OK. I want uninstall the bootloader from my board, because the time bafore my screen running is too long ( 2 seconds). But when you program with a external pr...

Thanks for your quick reply ! The solution with RC2 work fine ! I have not measure the consumption yet ? but then screen turn off and I think its the better solution. concerning thge bootloader , this is not for programming my Board, but just for not waiting two second at each start . Beacuse the bo...

Hello everybody , I have a question about the mikromedia for PIC18FJ . I use it on battery and I would like know, how can I do for decrease the consumption like in sleep mode ? do you think that putting the screen in black is effective? I would like turn off all the features on board, back lihgt for...

Hi all , I'm trying to use a pin to read an analog voltage with a PIC18F47K40. By using the library "ADC" I can not visualize the variable that I send on realterm via a TLL / USB cable. The analog pin to inspect is RD5. a 10K potentiometer joystick is connected to it. am I forced to configure everyt...

Hi , Sorry for my english .... i ma french... that's not an excuse but ...... I have bought a Trf Click . And I try to use it . I succeeded in transparent mode .... no problem ! But i would like to work in battery, also i try to test this device in wake UP on radio (WOR)...... disappointment...I can...

Hi,

Thank you for you answer !

Now, my idea is to remove the regulator MCP1826 to power on the module directly with my 4.2V. Voltages are compatible like DS say M95 Vmin 3.3V and Vmax=4.6V .

Do you think it's good like this ?

I need to power this module with one Li-ion battery

Thanks

Hello , I would like to know , if it's possible to power on this module with a Li-ion element ? ( 3.3Vempty at 4.2V full ). In the schématic, I can see , a regulator MCP1826T . But the voltage ADJ is for have 4.2V OUT Vgsm ! But with 4.2V battery voltage( full), with DROP out (250mV) I have 4V in th...

Hi,

You could look at this tutorial can be to find ideas. This is for OLED B click

http://fantaspic.fr/viewtopic.php?f=15&t=111

Good luck

PS : sorry for my english, but I'm french