Hello, currently i am developing a project and choosing btw few mikromedia boards for either PIC32 or STM32. I have a wide range of MCU i can use so i started to look info about MM both plus and standard versions. Because a huge number of pins is required i have been looking to schematics and i have...

Hello, first try to connect the Click directly to the PC (Via FT232, MAX232, etc) and try to communicate with it using terminal. If everything is OK than problem is with your hardware, else it is problem with Click. If you know that previously was working OK with an older version of module, make sur...

Hello, i am glad you solved your issue. As i mentioned, it looks so stupid when you even talk about it, but very often power supply causes a problem. Especially when you have devices like GPS, GSM, TFT, ... During device project phase even during planning phase you should consider which devices will...

Hello,

may look ridiculous but is you power supply strong enough to power display.
PS is always the first source of troubles that I check.

regards.

Hello, after lot of testing i found this code to use GPRS for Telit, but i think it you can use it: AT#USERID="telenor" AT#PASSW="gprs" AT+CGDCONT=1, "IP", "internet","0.0.0.0",0,0 AT#SKTSAV AT#GPRS=1 AT#SKTD=0,80,"telenor.rs",0,0 GET/HTTP/1.1 <cr><cl> Host: www.telenor.rs<cr><cl> Connection: keep-a...

Hello,

try to look at this post http://smstools3.kekekasvi.com/index.php?p=fileformat.

There you can find SMS file format specification.

Regards,

Dalibor

Hello, when i connect uBlox GPS Click board with LEA-6s to PC via USB i get $GPGGA, $GPGSV, $GPGLL, $GPRCM, ... sentences but when i connect it to PIC32 via UART and relay data to terminal i see that only messages i receive through UART are $GPGSV and $GPGGA. Is there any way to configure device to ...

Hello, i solved similar problem with mikroProg for STM. I think this can be applied to you, too. First you need to disable installing not signed drivers. You may find on the internet examples for this. When you log in with this disabled (there will be no notification) connect device, go to propertie...

Hello,

after lot of testing i found that on Win 8 bootloader works only when bootloader app is opened. All other applicaitons - browser, office... must be closed, only bootloader app can be opened.

Regards,

Dalibor

Filip, thank you for your help. I updated the drivers, again, i have installed all windows updates and i even flashed lastest BIOS version from manufacturer's site, but the problem remains. It seems that Microsoft changed something with USB drivers and signing, so for now we will stick to Win 7 unti...

Hello, has anyone maybe solved an issue with windows 8 USB HID bootloader. We are testing compatibility of all our software in order to update to Windows 8. All the software works OK, but the ME bootloader, which is the main upload software for MINI-32 - PIC32 board. It is now unusable and until thi...

Is it possible to use a 0 - 30mV simulator with the easyADC board or must the mV be amplified to volts first Hello, It is bossible but, this can vary depending of your needs and resources. Mostly this depends on Vref used inside the circuits, because the resolution is fixed to 12bits - 4096 voltage...

Hello, Now I am going to kill myself. I have changed capacitors, but now nothing seems to work. I have checked and doublechecked connections, soldered and resoldered again capacitors and new crystals but the MCU does not start by itself. The MCU is working properly but it starts only if i wake im ma...

Hello, i am in the middle of my graduation work and i finaly step into the phase when i got and soldered some of my boards. One of the board serves as an MCU board with TFT protoboard and is behaveing very slow(comparing with the LV32 V6 board with the same MCU and one pin differenece for TFT it is ...

Hello, please see the pictures from attachment. You will se that there are some diferencies btw. official FTDI datasheet and user manual/schematics provided with PIC32MX development board. As you can see, in the user manual there are following connections btw. FT&PIC32: RX - TX TX - RTS# CTS# - RXD ...