Hi Bill, Filip, after many trials I could use the ServoClick Library from Mikroe but I agree that it is too complicate. In addition it is really only for Servo motor while I would like to use PCA9685 for both Servo & leds. The Mikroe librery does not allow to get 0 to 100% duty for Led PWM Unfortuna...

Hi, I see that there are some differences in the code between these two projects, do they affect the project execution ? Regards, Filip. Yes the files are not totally the same, but I made a test by starting exactly from the same code fully working on 18F45K22 on EasyPic7 and changing only PIC type,...

Hi, I see that there are some differences in the code between these two projects, do they affect the project execution ? Regards, Filip. Yes the files are not totally the same, but I made a test by starting exactly from the same code fully working on 18F45K22 on EasyPic7 and changing only PIC type,...

Hi MikroE, Filip, I'm trying to make some progress on usage of MikroC & embedded Visual TFT. I've developed my own simply HW composed by MCU Card 18F87K22 and EASYTFT on which I have transferred a fully working code for EASYPIC7 18F45K22+EASYTFT on 18F87K22 the attached code works in terms of Calibr...

Thank you Filip, I understood that area to place the user code is different if using Visual TFT alone or MicroC merged with V TFT. In V TFT there is the specific windows named "user code" and here I place it. Now I have moved all user code in main.c file as usually done for MicroC. No error any more...

Hi, I have just purchase the Dongle for Visual TFT and it doen't work with Visual TFT 4.6.1 alone ( DEMO limit) bu it work with MicroC compiler 7.1.0, that's could be fine, but the code I made return error and do not recognize the function I entered in the MAIN --> while routine Error is "undeclared...

Hi Mrunal,
Thanks for your input. I have verified the problem was not related to UART communication but after many attempts I found the right way to write and read the EEprom. Thanks

Hello Friends, I would your help to solve an issue about RS232/EEprom that is making me crazy. I would send 2 message from RS232 to EEprom of PIC 16F1789 ( EAsyPic7). I am not able to send/store the message properly I get garbage characters and no stable reading on the LCD display. one message alter...

Hi, Please, can you post the photo of the mikromedia ? Regards, Filip. Hi Filip, Sorry for long time. Finally I make it working by changing the TFF initialization TFT_Init_ILI9341_8bit(240, 320); Then I had 1 WiFi Plus kit defective Nevertheless now the example project "WiFi Control demo" is workin...

Hello MikroE forum, I would need an help! PLEASE.. I have all the hardware needed to test the WiFi Control demo from the Libstock here: http://www.libstock.com/projects/view/358/wifi-control-demo On the 2GB MicroSD formatted with FAT ( from Windows XP, No FAT32) I have copied the .RES file as well a...

Hello Everybody, I am almost new in program and I tried to use the given code on EasyPic4 with 16F877A 8MHz Xstal and a DS1820, however the given code doesn't work. I have find a working code with LCD but no one with 7 seg. display. By merging 2 working codes I have created the below code with Micro...