I would stay away from windows XP except when the XP computer is not connected to any network. Large botnet attacks are usual those XP machines and even windows95/me machines. Switch to at least windows7 if you want internet access. Note : These days, trojan horse downloaders can be hidden in a pict...

Note: I use a STM32F407ZGT6 which is placed on the 7 inch stem32 board. So the available pins are: I²C1 : PB6, PB7 uart2 : PA3, PD5 Uart6 : PC6, PC7 I²C2 : PF0, PF1 Interrupts : PE0, PE1, PE2, PF3 PWM : PD12, PD13, PD14, PD15, PE5, PE6 GPIO : PF2, PF7 SPI1 : PA5, PA6, PB5, PA15 GPIO : PD0, PD1 SPI2:...

Or dump PWM and use something else to detect the left and right flanks of the pulses of the CREF signal. The CSENSE is a matter of 1 detection to figure out the direction. Then the LTR and RTR not PWM but sort of switching pins high and low. About timing: the fastest duty cycle of the CREF is 3/6 ms...

I would say, test the timer calculator.
If it's a usefull app, add small or bigger donation

[solved]
Thanks Dejan

Picture 1: The CREF clock is not stable , frequency drops. Picture 2 CREF stable so no problem I could use fixed pwm. Duty cycle if this case 7/14 ms but it can even be 25/50 or even slower. The needle signals then 14/28 ms. (or slower) So to be sure that the needle signals are synchronized with the...

Agreed,

I also use rather basic as C
So Mikroelektronika, are there indeed plans to dump the basic compilers?

Note: I started now with admin rights and the meupdater wizard starts.
I ended the process, in Avira firewall give meupdater full access and then start updating again with administrator rights or restricted rights, always the same:
Time Out.

If I click on help...check for updates, a gereen pop-up says that version 3.3.1 is available but the computer can not connect. I have a registrated version. Ok, Avira's firewall may block something but Mikrobasic has full access. Perhaps the update is another application but strangely enough, mikrob...