The problem was the library i installed in february this year. The new lib works.


BR,
Berni

Hi, here i´m again. I have found an other user with the same problem: https://forum.mikroe.com/viewtopic.php?f=178&t=71746&hilit=FAT32+empty but with the STM Hardware. They highre the Allocation Unit Size i formatt the card they higher the correct (not empty) files i can save. I think i use the curr...

Hi, i try to use a SD card with my MMB for PIC32 to store some data. This is my function: void safeOnSD() { strcat(&Label15_Caption, ".TXT"); fhandle = -1; fhandle = FAT32_Open(&Label15_Caption, FILE_APPEND); if(fhandle < 0) while(1); FAT32_seek(fhandle, 0); strcat(&writeBuffer, "Configuration:"); s...

Hi,

i had the same problem. If your warranty is off an if you only use the first row from the connector from the programme you can make it like me in the picture.

Best regards

Hi Uros, Yes you understand me right. After i put a 12 Mhz oscillator on the riverdi PCB (don´t forget to unsolder the 0R resistor) i come through the touch calibration routine. But only with white screen. Should i try it with 12 Mhz an prescaler to 1 as Internal or External? I think the problem wit...

Hi again, i found th problem now - maybe. After soldering a 12 mhz oscillator and setting the osc settings to EXTERNAL in vtft the programm is working in cycles. But now i only have a white screen. I have use the followig settings: // Default configuration parameters const TFT800Display VTFT_FT800_C...

Hi Uros, i have tryed everything... All signals are OK. I have checked this direct on the FT801 with my scope. Can you try my software for example with your PIC32 clicker and the FT800 cklick? Always stuck at SPI2_Read in FT800_Init(). I think i have some wrong settings in VTFT. Best regards, Berni4

Hi Uros,

i´m useing my own PCB with a PIC32MX575F512H. The SPI2 is conected to the FT801. The schematic is the same like the Connect EVE Board (10k pullup for MOSI, CS, INT and PD and a 27R in the MISO line.

Best regards,
Berni4

I have try out someting and find a strange signal in the MISO line. See the photo. Blue = MISO Red = CS Any idea? The emty project stuck after call the FT800_init() Next question: In VTFT i only can choose 320x240 px, the 2.8" Riverdi has 240x320 px (portrai not landscape) is it possible to rotate i...

Hi everyone, i´m working on a project with the 2.8" Riverdi UXW Display, VTFT and MIKROC for PIC32. What is the right way to find out the TFT Display parameters in VTFT? I only have a white screen, so i think the communication between the PIC32 and the FT801 is ok but in the communication between th...

Hi,

i´m useing vtft and the FT800. is it possible to make a spcific color from a image transparent? I´ll show the background in the white area of a image.

best regards,
Berni4

Hi,

Is it possible to program the mini32 via the integrated programmer in the PICPLC16 Board?

Best regards,
Berni4

Thank you.
Where is the controller setting which makes visual tft in the generated code?

Hi,
I have the same problem. But I want to use my old programs. When comes the Visual TFT update? Or can I make the settings by hand?

Berni4

Hello,

i have the same problem with Windows 8 (64). With Windows 7 (32) i have no problem. The only problem i have with Windows 7 is that my MikroC (key license) isinstalled on my Windows 8 PC.

Is there a driver update for Win 8 or can i change my Key license to a Dongle license?