Deleted by me.

Hello,

The easiest way to do this is to use a small capacitor on the ADC input (100nF-1uF).

Of course this can be solved with programming.


Best regards,
Peter

Hi,

Did you properly turn ON GSM2 Click board over RST pin ?

Communication speed is set to 9600bps ?


Best regards,
Peter

Thanks Peter, How do i get the wiring connection(spi connection) and MikroC PRO example code to connect GLCD KS108 to PIC 16F46K22/16F887 ?. Do you have link? Many Thanks :D Hi Saharul, Serial LCD/GLCD Adapter Board http://www.mikroe.com/add-on-boards/display/serial-lcd-glcd-adapter/ http://www.mik...

Is there any way I can display the build date of the project on the LCD? I got many eqiupments running different versions of software and this would be really helpful for the maintance team to keep them all updated. Hello, Programmer can add manually build date info as constant in code, later this ...

dear friend i see that, thanks or your attention and for your good offer, It has a little different, My IC is PIC18F4550 and it hasn't RC.3 (it has RC.0,1,2, 4 ,5,6) And this program don't work for my IC , so how can i change this lines ? //SHT11 connections extern sfr sbit SDA_pin; //at RC4_bit; /...

Hi, Does the MikroC PRO SPI GLCD Library support GLCD with ST7920 GLCD driver? Many Thanks :D Hi Saharul, ST7920 is not fully compatible with KS0108. MikroE GLCD library supports KS0108/7 compatible display controllers. Before making any connections double check the pinout. Best regards, Peter

hi all i am trying to work a si4421 rf chip but it doesnt seem to work. Has enyone try this chip? Hi xyar2003, I must to admit that this question is quite strange for GLCD Font Creator forum group, if you agree. :) Did you try circuit and PCB from datasheet? Which code you tried to use? Silicon Lab...

Dear peter.... I don't that mean. How write C language code in Mikroc program for the gps show lat and long on glcd display Hello itsarapong, that is quite differently from first question: Could you me, I need to sent "AT" into gps module if reply of gps module is "OK" let LED turn ON So..... How c...

hi im electronic hobbyist i found this project a open source tharmostat with ds18b20 unfortunately in my country we havent this temperature sensor :x we have only the ds1820 im not a programmer :oops: and i need your help plzzz thanks Hello Electosoft and welcome to the MikroE forum, Can you specif...

Hello, Everything is ok :) . Yes, that is strange, I think that Copy/Paste routine is used. To be more precise in code ADCON0 is used three times: ADCON0 = 0b00000010; // Setta AN0 conme ingresso analogico ADCON0 = 0b00000110; // Setta AN1 conme ingresso analogico ADCON0.F0 = 1; //Modulo AD abilitat...

Where is your call to ADC_Init() ? Hello, - ADC_Read routine initialize ADC module and reads ADC value every time it is called. - ADC_Get_Sample just read analog input without ADC module initialization. ADC_Read routine requires more time for sampling than ADC_Get_Sample because this routine initia...

When I connect the grounds of the circuits,everything works great. When I disconnect the ground,nothing work. Hello, This is symptomatic when RF modules have different frequencies, adjust the same radio frequency on both modules. Also see this : Cheap RF modules made easy!! http://www.romanblack.co...

Hello, See SHT11 click : http://www.mikroe.com/click/sht1x/ SHT1x click - Example http://www.libstock.com/projects/view/211/sht1x-click-example Examples are written for: - EasyPIC v7 - PIC18F45K22 - EasyPIC PRO v7 - PIC18F87K22 - EasyPIC v7 for dsPIC30 - dsPIC30F4013 - EasyMx PRO v7 for Stellaris(R)...

Hello Pierre, If it is possible take PIC18F46K22. This PIC have 64KB flash memory and 1KByte EEPROM. PIC18F45K22 and PIC18F46K22 are compatible, and PIC18F45K22 is default uC for EasyPIC v7. For PIC18F45K22 You can find many examples in compiler and development board examples on this location: C:\Pr...